Preliminary Program subject to change
TWD18 Fluid/Particle Systems in Material Processing
OverviewThis session deals with experimental and modeling aspects of material processing and manufacturing using solid particles. The topic of modeling and experimental results across the length scales from molecular to particle to product materials is of specific interest to this session. Demonstration of relationship at different scales, with potential impact on scale-up process, is of great interest.
Primary SponsorFluidization and Multiphase Flow/Separations (TWd)

Chair

Stephen E. Rankin
Assistant Professor
Chemical and Materials Engineering
University of Kentucky
177 Anderson Hall
Lexington, KY 40506
Phone Number: 859-257-9799
Fax Number: 859-323-1929
Email: srankin@engr.uky.edu

CoChair

Rhonda Lee-Desautels
Assistant Professor
Chemical and Materials Engineering
University of Kentucky
4810 Alben Barkley Drive
Paducah, KY 42002
Phone Number: 270-534-3122
Fax Number: 270-534-6292
Email: rlee@pop.engr.uky.edu
MATHEMATICAL MODELLING OF REACTION KINETICS OF LIMESTONE CaCO3 DECARBONIZATION IN A STATIONARY FURNACE
Joseph O. Odigure and A. Mohammed, Chemical Engineering Department, Federal University of Technology, Bosso Road, Minna, Nigeria
Preparation of Spherical Nanostructured Particles of Lithium Manganese Oxides by a Spray Pyrolysis and Fluidized Bed Hybrid System
Izumi Taniguchi, Hiroki Furubayashi, Keigo Matsuda and Shinya Nakajima, Chemical Engineering, Tokyo Institute of Technology, 12-1, Ookayama-2, Meguro-ku, Tokyo, Japan
Mortar Paste Structure Evolution during Ram Extrusion Process: an Experimental Investigation
Arnaud Perrot1, Yannick Mélinge1, Patrice Estellé1 and Christophe Lanos2, (1)LGCGM équipe Matériaux et Thermique de l'Habitat, INSA de Rennes, 20 avenue des buttes de Coesmes CS14315, RENNES, 35043, France, (2)LGCGM équipe Matériaux et Thermique de l'Habitat, IUT de Rennes, 2 rue du clos courtel, RENNES, 35704, France
Numerical Analysis of Air-Particles Swirl Flow in a Pipe
Akihiro SAKAMOTO1, Yutaka TSUJI2, Yoshiaki TAKEISHI1 and Mutsumi TANIDA3, (1)Corporate Research & Development Laboratories, Sumitomo Metal Industries, Ltd., 16-1 Sunayama, Kamisu-si, Ibaraki, 314-0255, Japan, (2)mechanical engineering, Osaka University, 2-1 Yamadaoka Suita-si, Osaka 515-0871, Japan, (3)Wakayama Steel Works, Sumitomo Metal Industries, Ltd., 260-100 Funao, Kainan-si, Wakayama, 642-0001, Japan
Characterization of Bauxite-Residue Classified by Wet Cyclone System
Shigehisa Endoh and Jongyeong Hyun, Research Institute for Environmental Management Technology, National Institute of Advanced Industrial Science and Technology (AIST), AIST Tsukuba West, 16-1 Onogawa, Tsukuba, 305-8569, Japan
Comparison of Electrostatic Fine Powder Coating and Coarse Powder Coating by Numerical Simulations
U Shah1, Jesse Zhu2 and C Zhang1, (1)The University of Western Ontario, 476, Thomson Engineering Bldg., London, ON N6A5B9, Canada, (2)Chemical & Biochemical Engineering, The University of Western Ontario, 476, Thomson Engineering Bldg., London, ON N6A5B9, Canada

Topical W: Fifth World Congress on Particle Technology