Heat of Cracking for Naphtha in Risers of Fcc Units
Carlos Alberto Dantas Moura1, Andrea de Rezende Pinho2 and Jose Mozart Fusco2, (1)Research and Develpment Center, Petrobras, Cidade Universitaria - Quadra 7 - Ilha do Fundao, Rio de Janeiro, Brazil, (2)Same as first author, Petrobras, Cidade Universitaria - Quadra 7 - Ilha do Fundao, Rio de Janeiro, Brazil |
How Fccu Trickle Valves Affect Catalyst Losses
Donald F. Shaw and Richard E. Walter, Carmagen Engineering, Inc., 4 West Main Street, Rockaway, NJ 07866 |
Heat Transfer and Heat Removal in Flowing Dense Phase Fluidized Beds
Peter Van Opdorp and david lomas, development, uop llc, 25 east algonquin road, des plaines, IL 60016 |
Molecular Based Kinetic Modeling of Fcc Process
Ryuzo Tanaka, Craig A. Bennett and Michael T. Klein, School of Engineering, Rutgers, The State University of New Jersey, 98 Brett Rd, Piscataway, NJ 08854-8058 |
Evaluation of the Pid Performance for Fcc Units
Pleycienne Ribeiro Trajano1, M. R. Wolf Maciel2 and R.ubens Maciel Filho1, (1)Faculty of Chemical Engineering - Departament of Chemical Processes - Laboratory of Optimization, Design and Advanced Control, State University of Campinas (UNICAMP), Campinas, Brazil, (2)Faculty of Chemical Engineering - Departament of Chemical Processes - Laboratory of Separation Processes Development, State University of Campinas (UNICAMP), POBox 6066, Campinas, 13084759, Brazil |
Optimizing FCC: LPG rate and Cat Gasoline Octane Constraints
Marty Poole, Valero, Houston, TX 77032 |
|