Preliminary Program subject to change
TWB22 Engineered Particles or Engineered Nanoparticle Structures - III
OverviewSession Extension - Core Shell Structures
Primary SponsorParticle Design: Formation and Processing (TWb)

Chair

Richard Turton
Chemical Engineering
West Virginia University
453 Engineering Sc. Building, P.O. Box 6102
Morgantown, WV 26506
Phone Number: 3042932111 x 2402
Fax Number: 3042934139
Email: richard.turton@mail.wvu.edu

CoChair

Greg Spontak
Research Scientist
Procter & Gamble Company
5299 Spring Grove Ave.
Cincinnati, OH 45217
Phone Number: 513-627-6075
Email: spontak.gg@pg.com
Coating on Single Particle Level
Stina Karlsson1, Anders Rasmuson1, Ingela Niklasson Björn2 and Staffan Folestad2, (1)Chemical and Biological Engineering, Chemical Engineering Design, Chalmers University of Technology, Kemivagen 10, Gothenburg, 412 96, Sweden, (2)PAT Center of Excellence, AstraZeneca R&D Mölndal, Pepparedsleden, Mölndal, 431 83, Sweden
Single Droplet Drying: Transition from the Effective Diffusion Model to a Modified Receding Interface Model
Stephen R. L. Werner, Institute of TEchnology and Engineering, Massey University, Tennant Drive, Palmerston North, New Zealand, Jim R. Jones, Institute of Technology and Engineering, Massey University, Tennant Drive, Palmerston North, New Zealand, John E. Bronlund, Instt. of Technology and Engineering, Massey University, Private Bag 11222, Riddet Building, Palmerston North, New Zealand and Anthony (Tony) H.J. Paterson, Institution of Technology and Engineering, Massey University, Private Bag 11222, Palmerston North, New Zealand
Experimental Study of Coating in a Bottom-Spray Fluidized Bed
Mehdi Alavi1, Leila Mirmomen1 and Khashayar Saleh2, (1)Iran University of science and technology, Tehran, Iran, (2)Dpt Génie des Procédés Industriels / TPS, Université de Technologie de Compičgne, Rue Personne de Roberval, Compičgne, 60205, France
Tailor-Made Composites by High Pressure Spray Processes
Gunnar Brandin1, Sabine Kareth1, Andreas Kilzer1, Marcus Petermann2 and Eckhard Weidner3, (1)Chair for Process Technology, Ruhr-University Bochum, Universitaetsstr. 150, IB 6/126, Bochum, 44801, Germany, (2)Chair for Particle Technology and Praticle Design, Ruhr-University Bochum, Universitaetsstr. 150, IB 6/126, Bochum, 44801, Germany, (3)Chair for Process Technology, Ruhr-University Bochum, Universitaetsstr. 150, IB 6/126, IB 6/126, Bochum, 44801, Germany
Influence of Selected Process and Formulation Variables on Granule Impact Strength, Agglomeration Tendency and Coating Layer Morphology of Sodium Sulphate Cores Coated in Small-Scale Top-Spray Fluidised Bed
Peter Dybdahl Hede1, Poul Bach1 and Anker D. Jensen2, (1)Solid Products Development, Novozymes A/S, Smřrmosevej 11, DK-2880, Denmark, (2)Department of Chemical Engineering, Technical University of Denmark, Building 229, DK-2800 Lyngby, Denmark
Ultrafine Powder Coatings, an Innovation for the Coating Industry
H. Zhang, The University of Western Ontario, 476, Thomson Engineering Bldg., London, ON N6A5B9, Canada and Jesse Zhu, Chemical & Biochemical Engineering, The University of Western Ontario, 476, Thomson Engineering Bldg., London, ON N6A5B9, Canada

Topical W: Fifth World Congress on Particle Technology