Preliminary Program subject to change
TWD27 Fundamentals of Fluidization and Fluid Particle Systems - III
Overviewextended session
Primary SponsorFluidization and Multiphase Flow/Separations (TWd)

Chair

Franco Berruti
Professor and Dean of Engineering
Chemical and Biochemical Engineering
The University of Western Ontario
London, ON N6A5B9
Canada
Phone Number: 519-661-2128
Email: berruti@eng.uwo.ca

CoChair

Martin Rhodes
Chemical Engineering
Monash University
Wellington Road
Clayton
Melbourne,
Australia
Phone Number: 61-3-9905-3445
Fax Number: 61-3-9905-5686
Email: martin.rhodes@eng.monash.edu.au
The rise of bubbles and slugs in gas-fluidized beds using Ultra-fast Magnetic Resonance Imaging
Christoph R. Müller, Mick D. Mantle, Andrew J. Sederman, John F. Davidson, John S. Dennis, Paul S. Fennell, Allan N. Hayhurst, Lynn F. Gladden and Andrew C. Rees, Department of Chemical Engineering, University of Cambridge, Pembroke Street, Cambridge, CB2 3RA, United Kingdom
Multiresolution Analysis of Pressure Fluctuations in a Gas-Solids Fluidized Bed
Bangyou Wu1, Apostolos Kantzas1, Celine Bellehumeur2 and Sergey Kryuchkov1, (1)Tomographic Imaging and Porous Media Laboratory; Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada, (2)Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada
Granular temperature in a gas fluidised bed
Mark J. Biggs1, Liansong Xie1, Donald Glass1, Vladimir Zivkovic1 and M.A. (Curt) Koenders2, (1)Institute for Materials and Processes, Kenneth Denbigh Building, King's Buildings, Mayfield Road, Edinburgh, EH9 3JL, United Kingdom, (2)Department of Mathematics, Kingston University, Penrhyn Road, Kingston upon Thames, Surrey, KT1 2EE, United Kingdom
Shape of a particle curtain falling in stagnant air
Chrestella Wardjiman, Chemical Engineering, Monash University, PO BOX 36, VIC - 3800, Australia and Martin Rhodes, Department of Chemical Engineering, Monash University, P.O. Box 36, VIC 3800,, Victoria, Australia
The Onset of Bubbling in High Temperature Fluidized Beds
Rossella Girimonte, Ingegneria Chimica e dei Materiali, Università della Calabria, Arcavacata di Rende (Cosenza), Italy and Brunello Formisani, Dipartimento di Ingegneria Chimica e dei Materiali, Università della Calabria, Arcavacata di Rende (Cosenza), Italy
Laser Diagnostics of Flow Structures and Gas-Mixing Induced by Bubble Bursting at the Surface of Gas-Fluidized Beds
ROBERTO SOLIMENE1, PIERO SALATINO1, ANTONIO MARZOCCHELLA1 and RAFFAELE RAGUCCI2, (1)DIPARTIMENTO DI INGEGNERIA CHIMICA, UNIVERSITA' DI NAPOLI FEDERICO II, PIAZZALE TECCHIO 80, NAPOLI, Italy, (2)ISTITUTO DI RICERCHE SULLA COMBUSTIONE, CONSIGLIO NAZIONALE DELLE RICERCHE, PIAZZALE TECCHIO 80, NAPOLI, Italy

Topical W: Fifth World Congress on Particle Technology