| Panel Discussion: Commercialization of Micro Process Technology | ||
| Geraldine Andrieux, Yole Développement, 45 rue Sainte-Genevieve, Lyon, F-69006, France, Annette A. Johnston, Dept. 07PP NCF3-3, Abbott Laboratories, 1401 N. Sheridan Road, North Chicago, IL 60064-6265, Juergen Brandner, Institute for Micro Process Engineering IMVT, Forschungszentrum Karlsruhe, Hermann-von-Helmholtz-Platz 1, DE-76344 Eggenstein-Leopoldshafen, Germany, Mark M. Disko, Corporate Strategic Research, ExxonMobil Research and Engineering Company, 1545 Route 22 East, Annandale, NJ 08801, Yiton Fu, Corporate Research, Unilever PLC, Colworth House, Sharnbrook, Bedford, United Kingdom, Douglas Galloway, UOP LLC, Des Plaines, IL 60017, Volker Hessel, Professor, Institut für Mikrotechnik Mainz GmbH, Carl-Zeiss-Straße 18-20, 55129, Mainz, Germany, Dirk Kirschneck, Microinnova KEG, Reininghausstrasse 13a, Graz, 8020, Austria, Jan J. Lerou, Velocys, Inc., 7950 Corporate Boulevard, Plain City, OH OH 43064, Frank A. Meschke, ESK Ceramics GmbH & Co. KG, Max-Schaidhauf-Strasse 25, D-87474 Kempten, Germany, Dominique M. Roberge, Exclusive Synthesis, Process R&D, Lonza Ltd., Lonzastr., Visp, Switzerland, Alberto Simoncelli, F&HC Engineering Process Breakthrough, P&G Technical Centres Limited, Whitley Road, Longbenton, Newcastle upon Tyne, NE12 9TS, United Kingdom, Olaf Stange, Ehrfeld Mikrotechnik BTS GmbH, Mikroforum Ring 1, 55234 Wendelsheim, Germany, Katsuhiko Tahara, Resereach & Development Center, Arakawa Chemical Industries, Co. Ltd, 1-1-9, Tsurumi, Tsurumi-ku, Osaka, 538-0053, Japan and Xini Zhang, Chemical & Pharmaceutical Development, Johnson & Johnson Pharmaceutical Research & Development, L.L.C., 1000 Rt. 202, Raritan, NJ 08869 This session begins with a short introduction on the use of Micro Process Engineering, followed by a panel discussion. Attendees may interact both with industrial users and solutions providers in analysing performance and cost of existing technology. Discuss will focus on how Microprocess technology is used in production, and what impact MicroProcess Engineering will have on the chemical industry worldwide. Extended Abstract Status: Not Uploaded | ||