Session: Poster Session (2012 Spring Meeting)

Tuesday, April 3, 2012: 5:00 PM

Third Level Foyer (George R. Brown Convention Center)

Description:

Poster Session

Sponsor:

Global Congress on Process Safety

Co-Sponsor(s):

14th Process Plant Safety Symposium (PPSS) (T1A), 27th Center for Chemical Process Safety International Conference (CCPS) (T1B), 46th Annual Loss Prevention Symposium (LPS) (T1C), Process Safety Management Mentoring- PSM2 (T1D)

Chair:

James R. Thompson
Email: jthompson@absconsulting.com

Co-Chair:

Steven Zhang
Email: Steven.Zhang@mustangeng.com

- indicates paper has an Extended Abstract file available on CD.

(15a) Intelligent Procedures Design: A New Approach to Developing Operating Procedures to Minimise Non-Compliance and Maximise Effectiveness
David Embrey

(104aa) Industry and Regulators Working Together in Preventing Accidents
Cho Nai Cheung and Randall Sawyer

(104ab) Facility Layout Optimization Detailed Research Through MILP and MINLP
Jaime E. Cadena, Felipe Munoz, Jorge M. Gomez and Manuel Ramos

(104ad) How to Go From “Lesson” to “Learned”: Systematic PSMS Benchmarking to Drive Learning
Robert Cravens and Cindie Pridy

(104ae) Using Research-Vetted, Actionable Leading Indicators to DRIVE Safety Performance and Operational Excellence
Joseph Stough

(104ag) A Comparative Analysis of Two Approaches for Pool Evaporation Modeling: Shrinking Vs. Non-Shrinking Pool Area
Anjana Meel and Shahryar Khajehnajafi

(104ah) Human and Social Risk Preliminary Analysis (HS-RPA), a Case At PLG Site
Salvador Ávila Filho and Marise Barroso

(104ak) Plant Safety Through Process Control
Mohamed Soliman

(104al) Hydrogen Fluoride Alkylation in Oil Refineries: A Survey of Union Safety Representatives
Tom McQuiston, Kim Nibarger and Michael Wright

(104am) Driving Operational Discipline Through Quality Written Procedures
Brian D. Rains

(104an) Aerosol Flammabiltiy Study of Heat Transfer Fluid: Flammable Regions, Flame Development, and Ignition Delay Modeling
Szu-ying Huang, Xinrui Li and M. Sam Mannan

(104ao) Using a Process Simulator to Improve Relief System Analysis
Donald P. Malone

(104ap) Experimental and Computational Fluid Dynamics (CFD) Studies of Deflagration to Detonation Transition (DDT)
Camilo Rosas, Dr. Subramanya Nayak, Dr. Eric Petersen and Dr. M Sam Mannan

(104aq) Release and Dispersion of Heavy Gases - Experimental Results and Numerical Simulations
Christian Rauchegger, Dr. Volkmar Schröder, Dr. Volkmar Lohse and Prof. Dr. Dominique Thévenin

(104as) Methodology for Uncertainty Reduction for FDS Simulations to Obtain Refined Results for Performance-Based Design
Jaime E. Cadena and Felipe Munoz

(104aw) A Study on Oxidation of ETBE by Thermal Analysis
Xinrui Li, Hiroshi Koseki and M. Sam Mannan

(104ax) Back to Basics
Pablo R. Zunana and Pablo E. Bizzotto Sr.

(104ay) Safety and Safety-Instrumented System (SIS)
Chaudhry Jawad Saqlain and Tariq Alauddin

(104az) Pressure Relief System Reaction Forces – the Importance of Evaluating Existing Installations
Jason F. White, Dustin J. Smith, Bill Frenk and Nicholas N. Cristea

(104b) Detonation of A Gaseous CHARGE In A Confined and SEMI-Confined Workshop
Isabelle Sochet

(104bb) Matrix Approach to Streamlining HAZOP Studies for Complex, Multi-Mode Systems
Steven T. Maher, PE CSP, Michael B. Saura, Vasu Vasudevan and Edward Reyes

(104bd) Multi-Objective Optimization of Hazardous Substance Storage Facilities. the Decision Between Risks and Costs Associated to the Project
Esteban Bernechea, Miguel Angel Zamarripa Perez and Josep Arnaldos

(104be) “Explosibility Index” – Extension to Dust-Explosion Protection
Richard Prugh

(104bf) Preventing Runaway Polymerization of Vinyl Acetate in Storage Vessels
Jie Jiang

(104bg) A Review of Liquid Discharge Models Under Non-Steady or Transient Conditions for More Realistic Predictions of the Magnitude and Impact of Consequences Related with Loss of Containment Events
Marco-Antonio Medrano-González

(104bi) Reducing the Systemic Risks of Human Error Through Root Cause Analysis
James F. Marullo

(104bj) Preparedness for the Initial Moments of a Process Safety Incident
Pablo E. Bizzotto Sr. and Pablo R. Zunana

(104bm) Design Optimization of Storage Facilities Taking Into Account the Domino Effect
Esteban Bernechea and Josep Arnaldos

(104bp) Quantitative Risk Assessment Study of Hydrogen Cyanide handling areas of Acrylonitrile Plant
Pragnyadipta Sarkar

(104bq) Early Lessons From PSM Implementation
Dr Ed Bailey and Jack Lee

(104bs) Gas Detection Management in Petrochemical Plant
Lueci Vasconcelos do Vale, Helena Amélia F de C Oliviere and Júlio Cesar F de Santana

(104bt) Avenue for Excellence in Relief Valve Testing Program
Yasser Almowalad

(104bx) Regulatory Compliance for New Energetic and Hazardous Materials
Abdollah Kashani and Thaddeus C. Speed

(104by) The Use of Mass Spectrometry to Detect Leaks of Flammable or Toxic Elements
Everaldo L. Encarnacao and Mario Monteiro

(104bz) Comparison of degassing tank electrostatic discharge hazard during the expansion of polyethylene unit
Yi Liu

(104ca) An effective method to control dangerous petrochemicals storage tank hazard
Dongfeng zhao

(104cb) Fire and explosion domino effect evaluation on pressurized spherical tank
Xiaoyuan Wang and Xiaoyuan Wang

(104cc) A Method of relief ability evaluation in fire condition of gas gaterhing station
Jianmim Fu

(104cd) Prevention and control of H2S during bad oil processing
wang wendong

(104ce) A new type of fire suppressant powder of KHCO3/ã-Al2O3 nanocomposite
Yi Liu

(104cf) Risk visualization software of fire and explosion in chemical industrial area
Zhang Xinmei

(104d) Benefits of CFD for Onshore Facility Explosion Studies
Olav Roald Hansen, Scott G. Davis and Filippo Gavelli

(104e) The History of the Process Plant Safety Symposium
Victor H. Edwards

(104f) Normalization of Process Safety Metrics
Mengtian Wang, Ray Mentzer and Dr. Sam M. Mannan

(104g) Optimal Layout of Gas Detector Networks: A Comparison Study
Alberto Benavides-Serrano, Sean Legg, Carl D. Laird and M. Sam Mannan

(104h) Study of the Effects of Obstacles in LNG (Liquefied Natural Gas) Vapor Dispersion Using CFD Modeling
Roberto Ruiz Vasquez, Dr. Subramanya Nayak and Dr. Sam M. Mannan

(104j) Explosibility of Methane-Corn Hybrid Mixtures
Jiaojun Jiang, Diana Castellanos, Victor H. Carreto and M. Sam Mannan

(104l) Explosion In An HMX (Octogen) Plant
Martin Held

(104m) Things Plant Engineers Should Know about Reviewing Relief Valve and Flare Action Items
Dustin J. Smith

(104n) Quantifying LOPA Uncertainty
Raymond Freeman

(104r) Research and Implementation of Management Tools Used to Reduce Human Errors in Petrochemical Industry
Zhang Xiaohua

(104s) Standardization Process Safety Analysis Information Based on Knowledge Ontology
Zhang Weihua

(104t) Development of Process Safety Management Platform Based on Cloud Computing
Li Chuankun

(104u) Safety Instrumented Systems - the Operational and Maintenance Phase
Karl Watson

(104v) Using Simulators to Teach Process Safety and Operations At Petroplus Coryton
Lachlan Munn, Jason Williams and Donald C. Glaser

(104x) PFD for SIF: Accounting for Systemic Human Error in SIS
William Bridges and Harold W. Thomas

(104z) Risk-Based Inspection As a Tool for Managing Risks - Beyond Inspection Plans
Jose R. Aguilar-Otero Sr. and Lizsandra Lopez-Ojeda

See more of this Group/Topical: Global Congress on Process Safety

<< Previous Session | Next Session >>