New State-of-the-Art Cold Spray Equipment
Dr. Jean-Gabriel Legoux1, Bernard Harvey1, Christian Moreau1 and Stephen Yue2, 1Industrial Materials Institute, 75, de Mortagne, Boucherville, QC J4B 6Y4, Canada, 2Mining, Metals and Materials Engineering,, university McGill, 3610 University Street, Montreal, QC H3A 2B2, Canada |
Utilization of Composite Powders to Apply Ceramic Coatings in Cold Spray
Ms. Karen L. Taylor1, B. Jodoin1, J. Karov2, P. Richer1, G. Berube1, E. Sansoucy1 and A. Corbeil1, 1Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Ottawa, ON K1N 6N5, Canada, 2Health Canada, Medical Devices Bureau, Ottawa, ON, Canada |
Measurement and Numerical Simulation of Particle Velocity in Cold Spraying
Prof. Chang-Jiu Li, Dr. Wen-Ya Li, Hong-Tao Wang and Cheng-Xin Li, School of Materials Science and Engineering, Xi'an Jiaotong Univerisity, No.28 West Xianning Road, Xi'an, Shaanxi, 710049, China |
Influence of Particles Size and Morphology on Cold Sprayed Coatings Microstructure
Dr. Leonardo Ajdelsztajn1, B. Jodoin2, Alejandro Zuniga1 and Enrique J Lavernia1, 1Dept. of Chemical Engineering and Material Science, University of California, Davis, 1 Shields Avenue, Davis, CA 95616, 2Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Ottawa, ON K1N 6N5, Canada |
Numerical Simulation of the Cold Gas Dynamic Spray Process
Mr. Mo Karimi1, A. Fartaj1, G.W. Rankin1, Mr. Dan Vanderzwet2, J. Villafuerte2 and W. Birtch2, 1Mechanical, Automotive and Materials Engineering, University of Windsor, 401 Sunset Ave., Windsor, ON N9B 3P4, Canada, 2Supersonic Spray Technologies Division, Centerline (Windsor) Ltd., 1983 Ambassador Drive,, Windsor, ON N9C 3R5, Canada |
Effect of the Coating Erosion on the Cold Spray Process
Prof. Anatolii N. Papyrin1, Dr. Vladimir F. Kosarev2 and Dr. Sergey V. Klinkov2, 1Cold Spray Technology, 1421 Wagon Train Dr. SE, Albuquerque, NM 87123, 2Institute of Theoretical and Applied Mechanics of Russian Academy of Science, Institutskaya 4/1, Novosibirsk, 630090, Russia |
Influence of Powder Type and Properties on Ceramic Layer Deposition by Cold Spraying
Ms. Suvi P. Veräjänkorva, Juha Lagerbom and Petri Vuoristo, Institute of Materials Science, Tampere University of Technology, Korkeakoulunkatu 6, P.O. Box 589, Tampere, 33101, Finland |
Optimal Design of a Convergent-Barrel Cold Spray Nozzle by Numerical Method
Prof. Hanlin Liao1, Wen-Ya Li1, Ga Zhang1, Christian Coddet1, Hong-Tao Wang2 and Prof. Chang-Jiu Li2, 1LERMPS, University of Technology Belfort - Montbeliard, Sevenans, Belfort Cedex, 90010, France, 2Welding Research Institute, School of Materials Science and Engineering, Xi’an Jiaotong University, Xianning West Road 28, Xi'an, 710049, China |
Low Pressure Gas Dynamic Spray: Shear Localization during Particle Shock Consolidation
Prof. Roman Gr. Maev and Evgeny Leshchinsky, Physics, University of Windsor, 401 Sunset Ave, Windsor, ON N9B 3P4, Canada |
Properties of Cold Spray Nickel Based Coatings
Mr. Patrick Richer1, B. Jodoin1, L. Ajdelsztajn2, E. Sansoucy1 and Dr. G. E. Kim3, 1Department of Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Room A205, Ottawa, ON K1N 6N5, Canada, 2Dept. of Chemical Engineering and Material Science, University of California, Davis, 1 Shields Avenue, Davis, CA 95616, 3Perpetual Technologies, Inc., 38 Place du Commerce, Suite 10-163, Ile des Soeurs, QC H3E 1T8, Canada |
Effect of Particle Temperature on the Critical Velocity for Particle Deposition by Kinetic Spraying
Prof. Changhee Lee1, Jongho Lee1, Juneseob Kim1, Sumin Shin1 and Dr. Hyung-Jun Kim2, 1Materials, Hanyang Univ., Seungdong-Gu, Seoul, 133-791, South Korea, 2Welding Research Center, RIST, Nam-Gu, Pohang, 790-600, South Korea |
Critical and Maximum Velocities in Kinetic Spraying
Prof. Changhee Lee1, Jingwei Wu2, Prof Hongyuan Fang2, Sanghoon Yoon1 and Dr. Hyung-Jun Kim3, 1Materials, Hanyang Univ., Seungdong-Gu, Seoul, 133-791, South Korea, 2State Key-Laboratory of Welding Technology, Harbin Institute of Technology, West Dazhi Street, Harbin, 150001, China, 3Welding Research Center, RIST, Nam-Gu, Pohang, 790-600, South Korea |
Comparison of the Microstructure of Cold Sprayed and Thermally Sprayed IN718 Coatings
Ms. Tiziana Marrocco1, D.G. McCartney1, P.H. Shipway1 and Mr. Andrew Sturgeon2, 1School of M3, University of Nottingham, Wolfson Building, University Park, Nottingham, NG7 2RD, United Kingdom, 2TWI Ltd., Granta Park, Great Abington, Cambridge, CB1 6AL, United Kingdom |
Cold Spray Deposition of Metastable Alloys
Mr. G. Bérubé1, Prof. B. Jodoin1, Dr. L. Ajdelsztajn1 and J. Villafuerte2, 1Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Ottawa, ON K1N 6N5, Canada, 2Supersonic Spray Technologies Division, Centerline (Windsor) Ltd., 1983 Ambassador Drive,, Windsor, ON N9C 3R5, Canada |