Diagnostic of the Arc Spraying Process through Cored Wires
Prof. Wolfgang Tillmann and Dr.-Ing. Evelina Vogli, Institute of Materials Engineering, Dortmund University, Leonhard-Euler Strasse 2, dortmund, 44227, Germany |
Effect of Torch Hardware and Operating Parameters on Oxy-Acetylene Powder Flame Spray Heat Flux
Mr. John W. Cates1, Dr. Aaron C. Hall1, Dr. Richard A. Neiser1, Dr. Diedre A. Hirschfeld2, David E. Beatty3, Mr. David A. Urrea1, Mr. Timothy J. Roemer3, Andrew J. Mayer3 and Dr. David J. Cook1, 1Joining and Coating Department, Sandia National Laboratories, P.O. Box 5800, MS 1130, Albuquerque, NM 87123-1130, 2Materials and Metallurgical Engineering, New Mexico Institue of Mining and Technology, 801 Leroy Place, Socorro, NM 87801, 3Ketch Corporation, 1300 Eubank Blvd. S.E., Albuquerque, NM 87123-3336 |
High Speed Visualization and Plume Characterization of Hybrid Spray Process
Mr. Jovan Stanisic1, D. Kosikowski1 and P. S. Mohanty2, 1The University of Michigan, 127 Engineering Lab Building, 4901 Evergreen Rd., Dearborn, MI 48128, 2Mechanical Engineering, University of Michigan, 4901 Evergreen Road, Dearborn, MI 48128 |
Tailoring of Wire Feedstock and Processing Conditions in High Velocity Combustion Wire Spraying
Mr. Christian Rupprecht, Prof. Bernhard Wielage and Dr. Andreas Wank, Institute of Composite Materials, TU Chemnitz, -, Chemnitz, 09107, Germany |