Effects of Ce and Si Addition to CoNiCrAlY Bond-Coat Material on Oxidation Behavior and Bonding Strength of Thermal Barrier Coatings
Dr. Kazuhiro Ogawa1, Mr. Kiyohiro Ito1, Prof. Tetsuo SHOJI2, Dr. Hideshi Tezuka3 and Mr. Hideto Kato3, 1Fracture & Reliability Research Institute, Tohoku University, 6-6-11-718, Aoba, Aramaki, Aoba-ku, Sendai, 980-8579, Japan, 2Fracture & Reliability Research Institute, Tohoku University, 6-6-11-717, Aoba, Aramaki, Aoba-ku, Sendai, 980-8579, Japan, 3Tokyo Electric Power Company, 4-1 Egasaki-choCTsurumi-ku, Yokohama, 230-8510, Japan |
Nanostructured Partially Stabilized Zirconia as an Interlayer in a Multi-Layered Thermal Barrier Coating
Mr. Dwijendra Nath Guru1, Mr. William M. Mook2, Prof. Joachim V. Heberlein1, Prof William W. Gerberich2 and Prof. Christopher C. Berndt3, 1Dept. of Mechanical Engineering, Univ. of Minnesota, High Temperature and Plasma Laboratory, 111 Church Street SE, Minneapolis, MN 55455, 2Chemical Engineering and Materials Science Department, University of Minnesota, 421 Washington Avenue SE, 151 Amundson Hall, Minneapolis, MN 55455, 3School of Engineering, James Cook University, Townsville, 4818, Australia |
Low Thermal Conductivity Coatings for Gas Turbine Applications
Dr. Nicolaie Markocsan1, Dr. Per Nylen1, Mr. Jan Wigren2 and Dr. Xin-Hai Li3, 1Department of Technology, University of Trollhättan, Gärdhemsvägen 4, Trollhättan, 46129, Sweden, 2Volvo Aero Corporation, Trollhättan, 46181, Sweden, 3GRDM, Demag Delaval Industrial Turbomachinery AB, Finspång, 612 83, Sweden |
Microstructure and Oxidation of MCrAlY Coatings Produced by Various Thermal Spray Processes
Dr. Seiji Kuroda1, Mr. Mitsuhiro Shibata2, Dr. Makoto Watanabe1, Dr. Hideyuki Murakami1, Dr. Machiko Ode3 and Dr. Yukihiro Sakamoto4, 1Materials Engineering Laboratory, Thermal Spray Group, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki, 305-0047, Japan, 2Materials Engineering Laboratory, Thermal Spray Group, National Institute for Materials Science (Chiba Institute of Technology), 1-2-1, Sengen, Tsukuba, Ibaraki, 305-0047, Japan, 3Materials Engineering Laboratory, Computational Materials Science Center, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki, 305-0047, Japan, 4Faculty of Mechanical Engineering, Chiba Institute of Technology, 2-17-1, Tsudanuma, Narashino, Chiba, 275-0016, Japan |
Break |