Preliminary Program subject to change
12009 Process Development and Manufacturing for Novel, High-Tech Materials
OverviewThe emergence of new technologies, particularly in electronics as well as nano and bio-materials fields, is expected to have a profound impact on the process industries in the following decades. These novel, high-tech materials also present a great opportunity for channeling the cutting-edge research capabilities into generation of new markets and industries through process development. As such, development of new processes for these highly specialized products is very desirable not only from a perspective of generalized technological progress, but also for advancing the competitive nature and state of the art for the U.S. industry. This session invites papers that feature manufacturing processes for novel materials such as electronics products, nano-composites and biomaterials. Papers describing available commercialized manufacturing processes, or discussing development and scale-up of processes for commercialization are both welcome.
Primary SponsorProcess Development Division (12)

Chair

Korkut Uygun
Dr.
Wayne State University
5050 Anthony Wayne Dr.
ENG 1128
detroit, MI 48202
United States
Phone Number: 313-577-3741
Fax Number: 313-577-3810
Email: kuygu@che.eng.wayne.edu

CoChair

Karl R. Krause
Experimental Station
Corporate Process Development
DuPont Engineering Research and Technology
PO Box 80249
Wilmington, DE 19880
Phone Number: 302-695-1524
Fax Number: 302-695-8689
Email: karl.r.krause@usa.dupont.com

CoChair

Cawas A. Cooper
Senior Research Associate
Air Products and Chemicals, Inc.
7201 Hamilton Boulevard
R&D 3, Dock 6
Allentown, PA 18195-1501
Phone Number: 610-481-4075
Fax Number: 610-481-5236
Email: cooperca@apci.com
Production of Oxidation-Resistant Nanosized Metal Powders
Luis F. Hakim, University of Colorado at Boulder, 1111 Engineering Drive ECCH 111 UCB 424, Boulder, CO 80309, Candace L. Vaughn, Chemical and Biological Engineering, University of Colorado at Boulder, 1111 Engineering Drive ECCH 111 UCB 424, Boulder, CO 80309 and Alan W. Weimer, University of Colorado, 1111 Engineering Drive, Boulder, CO 80309-0424
Development of a New Platform of Fluorinated Photoresist Polymers
Karl R. Krause1, Kenneth W. Leffew2, George N. Lewis IV3, A. Stephen Frobese3 and Mani P. Ganti4, (1)Corporate Process Development, DuPont Engineering Research and Technology, PO Box 80249, Wilmington, DE 19880, (2)DuPont Central Research and Development, PO Box 80304, Wilmington, DE 19880, (3)DuPont Engineering Research and Technology, PO Box 80309, Wilmington, DE 19880, (4)DuPont Engineering Research and Technology, PO Box 80251, Wilmington, DE 19880
Design and Construction of a Dual Purpose Air Filter for Semiconductor Clean Rooms
Ryan A. Sothen, Chemical Engineering, Auburn University, 0322A Haley Center, Auburn, AL 36849 and Bruce J. Tatarchuk, Center for Microfibrous Materials Manufacturing, Department of Chemical Engineering, Auburn University, 316C Haley Center, Auburn, AL 36849
Electrochemical Generator for the Supply of Arsine to the Ion Implant Market
Reinaldo M. Machado1, Christopher L. Hartz2, James E. Hollen2, Jeffrey R. Phillips3 and David Tavianini4, (1)Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, PA 18195, (2)Electronics R&D, Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, PA 18195, (3)Electronics PST, Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, PA 18195, (4)Electronics M&A's, Air Products and Chemicals, Inc., 7201 Hamilton Boulevard, Allentown, PA 18195
Converting Processes to Unfold the Potential of Nanoparticles
Samuel Schaer, Dr. Steffen Pilotek, Dr. Frank Tabellion and Hans Naef, Bühler PARTEC GmbH, Science Park 2, D-66123 Saarbrücken, Germany

Process Development Division