Molecular Interactions to Product and Process Design: Crystallization, Education and beyond
Ryan C. Snyder, University of California Santa Barbara, Department of Chemical Engineering, Santa Barbara, CA 93106 |
3-Dimensional in Vitro Model of Hepatic Tissue for Investigating Liver Physiology and Pathophysiology
Rohit Jindal, Center for Engineering in Medicine, Massachusetts General Hospital, Harvard Medical School, 51 Blossom Street, Boston, MA 02114 |
Advanced Nonlinear Programming Formulations and Algorithms: Expanding the Scope of Industrial Nmpc Applications
Victor M. Zavala, Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, PA 15213 |
Transport Phenomena within Tissue Engineering Materials
Benjamin J. Lawrence, School of Chemical Engineering, Oklahoma State University, 423 Engineering North, Stillwater, OK 74078 |
Nanocomposite Properties and the Polymer Interphase
Karl Putz, Mechanical Engineering, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 |
Effects of Nanoparticle Addition on the Bulk, Surface and Interfacial Properties of Polymers
Anish Tuteja, Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Bldg. NE-47, Room 583, Cambridge, MA 02139, Wonjae Choi, Mechanical Engineering, Massachusetts Institute of Technology, Building 3-252, 77 Massachusetts Avenue, Cambridge, MA 02139, Joseph M. Mabry, AFRL/PRSM, ERC Inc., Edwards Air Force Base, 10 East Saturn Blvd., Bldg. 8451, Edwards, CA 93524, Michael E. Mackay, Michigan State University, Department of Chemical Engineering and Materials Science, East Lansing, MI 48824, Gareth H. McKinley, Mechanical Engineering, Massachusetts Institute of Technology, Building 3-250, 77 Massachusetts Avenue, Cambridge, MA 02139 and Robert E. Cohen, Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave., 66-554, Cambridge, MA 02139 |
Towards Understanding the Gecko Adhesive System
Noshir S. Pesika, Chemical Engineering, University of California, Interfacial Science Lab, Engineering II, Room 3357, Santa Barbara, CA 93106 |
Engineering Drug, Gene and Cell-Based Delivery Systems for the Treatment of Human Disease
Michelle R. Dawson, Dan G. Duda and Rakesh K. Jain, Department of Radiation Oncology, Edwin L. Steele Laboratory, Massachusetts General Hospital, Harvard Medical School, 100 Blossom Street, Cox 7, Boston, MA 02114 |
Engineering a Mulitfunctional Scaffold for Spinal Cord Repair
Noelle K. Comolli, Drexel University, Department of Chemical and Biological Engineering, Philadelphia, PA 19104, Itzhak Fischer, College of Medicine, Drexel University, Philadelphia, PA 19104, Birgit Neuhuber, Nuerobiology & Anatomy, Drexel College of Medicine, 2900 Queen Lane, Philadelphia, PA 19129 and Anthony M. Lowman, Deptartment of Chemical and Biological Engineering, Drexel University, 3141 Chestnut St., Philadelphia, PA 19104 |
Effect of Phosphorus on Acid Cracking of Lipids for the Production of Green Diesel
Stephen Dufreche1, Rafael Hernandez1, Todd French2, Mark G. White3, Earl G. Alley4 and William E. Holmes5, (1)Dave C. Swalm School of Chemical Engineering, Mississippi State University, 330 Swalm President's Circle Dr., Mississippi State, MS 39762, (2)Chemical Engineering, Mississippi State University, 330 Swalm Circle President Dr., Mississippi State University, MS 39762, (3)Dave C. Swalm School of Chemical Engineering, Mississippi State University, 330 Swalm President's Circle Dr., Mississippi State University, MS 39762, (4)Mississippi State Chemical Laboratory, Mississippi State University, Mississippi State, MS 39759, (5)Mississippi State Chemical Laboratory, Mississipp State University, P.O. CR, Mississippi State, MS 39762 |
Proteins of Novel Composition
Tae Hyeon Yoo, Division of Chemistry and Chemical Engineering, California Institute of Technology, 1200 E. California Blvd., MC 210-41, Pasadena, CA 91125 |
Enhanced Polymeric Nanoparticles for Gene Delivery
Jordan J. Green, Biological Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave., Room E25-342, Cambridge, MA 02476 |
Processing and Phase Behavior: Tools for Creating Nanoscale Polymer Structures
Christopher J. Ellison, Dept. of Chemical Engineering and Materials Science, University of Minnesota, 421 Washington Ave SE, Minneapolis, MN 55455 |
Novel Methods for Microfabrication of Cellular Interactions and Detection of Cell Phenotype Expression
Ji Youn Lee, Department of Biomedical Engineering, University of California at Davis, 451 East Health Sciences Dr., Davis, CA 95616 |
Quantifying Cellular Physiology Using Metabolic Models and Isotope Labeling
Patrick F. Suthers, Department of Chemical Engineering, The Pennsylvania State University, 147 Fenske Lab, University Park, PA 16802 |
Molecular Simulation of Heterogeneous Polymer Systems: From Biomimetic Materials to Energy Research
Vikram K. Kuppa, Chemical Engineering, Massachusetts Institute of Technology, 77 Mass Ave, Building 66 Room No-453, Cambridge, MA 02139 |
Analysis of Recognitive Polymer Systems: Focusing on the Tailorablity of the Macromolecular Structure in Order to Enhance Binding Characteristics
Asa D. Vaughan, Biomimetic & Biohybrid Materials, Biomedical Devices, and Drug Delivery Laboratories, Department of Chemical Engineering, Auburn University, Auburn, AL 36849-5127 |
Dynamics of DNA and Swimming Microorganisms Using Theory and Coarse-Grained Simulations
Patrick T. Underhill, Chemical Engineering, University of Wisconsin-Madison, Madison, WI 53706 |
Improved Polymer Properties for Use in Nanolithography
Robert A. Riggleman, Department of Chemical and Biological Engineering, University of Wisconsin, Madison, 1415 Engineering Drive, Madison, WI 53706 and Juan De Pablo, Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706 |
Nucleation Behavior of Nanoparticles and Crystals
Venkateswarlu Bhamidi, Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801 |
Isotopically Nonstationary Metabolic Flux Analysis
Jamey D. Young, Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave. 56-439, Cambridge, MA 02139 |
Colloidal Suspensions: Fundamental Physics and Engineering Applications
Jacinta C. Conrad, Materials Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL 61801 |
Surfactant Adsorption at Fluid Interfaces
Alissa J. Prosser, Oregon Health & Science University, Portland, OR 97239 |
Batch Reactor Studies of Methanol to Gasoline Over H+/zsm-5 Catalysts
Amit C. Gujar1, Hossein Toghiani2 and Mark G. White1, (1)Dave C. Swalm School of Chemical Engineering, Mississippi State University, 330 Swalm President's Circle Dr., Mississippi State University, MS 39762, (2)Chemical Engineering, Mississippi State University, 330 Swalm Circle President Dr., Mississippi State University, MS 39762 |
Multi-Compartment Drug Carriers
Guohui Wu, Department of Chemical Engineering, University of California, Santa Barbara, Santa Barbara, CA 93106 and Joseph A. Zasadzinski, Department of Chemical Engineering, University of California, Santa Barbara, CA 93106 |
Cellular Bioengineering: Towards in Vitro Models for Disease Pathophysiology and Toxicology
Anand K. Ramasubramanian, UC - Berkeley, Dept of Chemical Engineering, Berkeley, CA 94720 - 1462 |
At the Interface of Neuroscience and Cell & Biomolecular Engineering
David Colby, Institute for Neurodegenerative Diseases, UCSF, Box 0518, San Francisco, CA 94143 |
Mucosal Vaccine Delivery and Adjuvant Systems
Harvinder S. Gill, Department of Microbiology and Immunology, Emory University, Atlanta, GA 30332 |
Ordering of Spherical-Domain Block Copolymers in Monolayers and Multilayers
Gila E. Stein, Center for Nanoscale Science and Technology, National Institute of Standards and Technology, 100 Bureau Drive, Stop 8412, Gaithersburg, MD 20899-8412 and Edward J. Kramer, Materials and Chemical Engineering, University of California, Santa Barbara, CA 93106 |
Systems Biology Approach to Endocrine Signaling
Pamela K. Kreeger, Biological Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, 56-389, Cambridge, MA 02139 |
Reversible Addition-Fragmentation Chain Transfer in Microemulsion Polymerizations
Jennifer O'Donnell, School of Chemistry, University of Sydney, Sydney, Australia and Eric W. Kaler, Center for Molecular and Engineering Thermodynamics, Department of Chemical Engineering, University of Delaware, 102 P.S. DuPont Hall, Newark, DE 19716 |
Nanoengineering Systems for Targeted Drug Delivery, Cell-Based Therapy, and Microfluidic Biosensors/chips
Hongyan He, Department of Chemical and Biomolecular Engineering, The Ohio State University, 140 WEST 19TH AVE, Columbus, OH 43210 |
Computer Simulations of Complex Fluids and Materials
O. Berk Usta, Chemical and Petroleum Engineering, University of Pittsburgh, 1249 Benedum Hall, 3700 Ohara St., Pittsburgh, PA 15261 |
Estimating the Emission of Greenhouse Gases and Volatile Organic Compounds in Aqueous Electrolyte Solutions
James B. Falabella, Chemical and Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Dr. NW, Atlanta, GA 30332-0100, Xin-Sheng Chai, Institute of Paper Science and Technology, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, GA 30332-0100 and Amyn S. Teja, Georgia Institute of Technology, 311 Ferst Drive NW, Atlanta, GA 30332-0100 |
Determination of Ozone Uptake in Human Lungs: Study of the Effects of Smoking
Tim Brenza1, Melissa Lowe Bates2, Aziz Ben-Jebria1 and James Ultman1, (1)Chemical Engineering, The Pennsylvania State University, University Park, PA 16802, (2)Physiology, The Pennsylvania State University, University Park, PA 16802 |
Protein Engineering Strategies for the Creation of Fluorescent Biosensors
Tej Pavoor, Chemical and Biological Engineering, University of Wisconsin, 1415 Engineering Drive, Madison, WI 53706 and Eric Shusta, University of Wisconsin, 1415 Engineering Drive, Madison, WI 53706 |
Modeling Extracellular Mass Transport of Nutrients and Byproducts around Metabolizing Bacteria
Michael R. Benoit, Microbiology & Immunology, Stanford University, 299 Campus Dr., West, Stanford, CA 94305-5124 |
Engineered Polymer Vesicles (Polymersomes) for Targeted Adhesion, Bioimaging, and Controlled Delivery
Anthony J. Kim, Chemical and Biomolecular Engineering, University of Pennsylvania, 210 South 33rd St, Philadelphia, PA 19104 and Daniel A. Hammer, University of Pennsylvania, Philadelphia, PA 19104 |
Investigating Membrane Surface Interactions with Lipid-Coated Particles
Esther W. Gomez, Chemical Engineering, University of California, Berkeley, 106 Lewis Hall, Berkeley, CA 94720 and Jay T. Groves, Chemistry, University of California, Berkeley, 105 Lewis Hall, Berkeley, CA 94720 |
Acid Catalysis of Lipids to Produce Green Fuels: Advancing Biofuels in a Fossil Fuel World
Tracy J. Benson, Chemical Engineering, Mississippi State University, Mississippi State, MS 39759 |
Computational and Theoretical Studies of Soft Materials and Biological Systems
Arthi Jayaraman, Department of Material Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL 61801, Kenneth S. Schweizer, Material Science and Engineering, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, IL 61801, Carol K. Hall, North Carolina State University, Box 7905, Raleigh, NC 27695 and Jan Genzer, Chemical and Biomolecular Engineering, North Carolina State University, 911 Partners Way, Raleigh, NC 27695 |
Designing for Sustainability with CO2-Tunable Solvents
Jackson W. Ford, Chemical & Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Dr, Atlanta, GA 30332-0100, Charles L. Liotta, Chemistry and Biochemistry, Georgia Institute of Technology, PO Box 330834 Georgia Tech Station, Atlanta, GA 30332 and Charles A. Eckert, Chemical and Biomolecular Engineering, Georgia Tech, 311 Ferst Drive NW, Atlanta, GA 30332-0100 |
Multiscale Modeling of Structure and Transport Properties in Polymeric Materials
Xiaoyan Wang1, Benny D. Freeman2 and Isaac C. Sanchez1, (1)Chemical Engineering, University of Texas at Austin, Mail Code C0400, Austin, TX 78712, (2)Chemical Engineering, The University of Texas at Austin, 10100 Burnet Rd. Bldg 133, Center for Energy and Environmental Resources, Austin, TX 78758 |
Surfactants and Polyelectrolytes as Building Blocks for Soft Materials
Yakov Lapitsky1, Molly S. Shoichet1 and Eric W. Kaler2, (1)Donnelly Centre for Cellular and Biomolecular Research, Department of Chemical Engineering & Applied Chemistry, University of Toronto, 160 College Street, Toronto, ON M5S 3E1, Canada, (2)Center for Molecular and Engineering Thermodynamics, Department of Chemical Engineering, University of Delaware, 102 P.S. DuPont Hall, Newark, DE 19716 |
Hydrophilic Biopolymer Mediated Enhancement of Lung Surfactant Adsorption
Patrick C. Stenger and Joseph A. Zasadzinski, Department of Chemical Engineering, University of California, Santa Barbara, CA 93106 |
Engineering Protein Folding and Function Using Native Escherichia Coli Processes
Adam C. Fisher, Cornell University, 304 Olin Hall, Ithaca, NY 14853 and Matthew DeLisa, Chemical Engineering, Cornell University, 304 Olin Hall, Ithaca, NY 14853 |
Growth, Characterization, and Material Property Control of Silicon Carbide Thin Films for Micro- and Nanosystems
Christopher S. Roper, Chemical Engineering, University of California, Berkeley, 201 Gilman Hall, Berkeley, CA 94709 |
Affinity Adsorption of Viruses
Caryn L. Heldt, Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27695, Patrick V. Gurgel, ProMetic Life Sciences, 8168 Montview Rd, Mont-Royal, QC H4P 2L7, Canada, Lee-Ann Jaykus, Department of Food Science, North Carolina State University, Raleigh, NC 27695 and Ruben Carbonell, Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC 27606 |
From the Synthesis and Characterization of Electronic and Optical Oxide Nanostructured Materials towards Device Applications
Yuanbing Mao, Department of Chemical and Biomolecular Engineering, University of California at Los Angeles, Los Angeles, CA 90095 |
Fundamental Mechanisms of Biomaterial Interfaces: An Integrated Simulation and Experimental Approach
Jason C. Hower and Shaoyi Jiang, University of Washington, Chemical Engineering, Seattle, WA 98195 |
Integrating Multiscale Models, Experiments, Dynamics and Control: Applications in Energy Generation and Systems Biology
Vinay Prasad, Dept. of Chemical Engineering, University of Delaware, 150 Academy Street, Newark, DE 19716 |
“Nanoions”: Fundamental Properties and Applications of Charged Nanoparticles
Kyle J. M. Bishop, Chemical & Biological Engineering, Northwestern University, 2145 Sheridan Rd/TECH E136, Evanston, IL 60208 and Bartosz A. Grzybowski, Chemical Engineering, Northwestern University, 2145 Sheridan Rd/TECH E136, Evanston, IL 60208 |
Mechanistic Study of Methanol Synthesis Via CO2 Hydrogenation on Cu(111)
Lars C. Grabow, Chemical and Biological Engineering, University of Wisconsin-Madison, 1415 Engineering Drive, Madison, WI 53706 |
System Engineering: Applications for Space Missions, Energy Analysis and Healthcare
Selen Aydogan-Cremaschi, e-Enterprise Center, Discovery Park, Purdue University, 1201 West State Street, West Lafayette, IN 47907 |
Atomic Engineering of Metal Oxides:Energy Conversion, Heterogeneous Catalysis, and Biofunctionalization
Weiwei Gao1, Eric I. Altman2 and Cynthia M. Friend1, (1)Chemistry and Chemical Biology, Harvard University, Cambridge, MA 02138, (2)Chemical Eng, Yale University, New Haven, CT 06511 |
Simulations of Polymer Self-Assembly Using Field Theoretic Techniques
Erin Lennon, Chemical Engineering, University of California, Santa Barbara, Engr. II, Room 3357, UCSB, Santa Barbara, CA 93106-5080 and Glenn H. Fredrickson, Chemical Engineering and Materials, University of California, Santa Barbara, Engr. II, Room 3357, UCSB, Santa Barbara, CA 93106-5080 |
Directed Evolution of Enzymes and Biosynthetic Pathways
Tyler Johannes and Huimin Zhao, Chemical and Biomolecular Engineering, University of Illinois, 600 S Mathews, Box C-3 RAL 221 MC 712, Urbana, IL 61801 |
Developing Predictive Statistical Models to Understand the Dynamics of Inflammatory Cell Signals
Arthur C. Goldsipe, Biological Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave. 56-353, Cambridge, MA 02139, Christopher W. Espelin, Pfizer Research Technology Center, Cambridge, MA 02139, Peter K. Sorger, Systems Biology, Harvard Medical School, 200 Longwood Ave, WAB 438, Boston, MA 02115 and Douglas A. Lauffenburger, Biological Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave, 56-341, Cambridge, MA 02139 |
Field-Mediated Control of Materials Synthesis and Biological Applications
William D. Ristenpart, Division of Engineering and Applied Science, Harvard University, 402 Pierce Hall, 29 Oxford St., Cambridge, MA 02138 |
Micro/nanofluidic Devices for Sensing and Reaction Engineering
Adarsh D. Radadia, Chemical and Biomolecular Engineering, University of Illinois, 600 S. Mathews St., Urbana, IL 61801 |
Design of Multifunctional Polymer-Polymer Nanocomposites
Aflal M. Rahmathullah, Department of Chemical and Biological Engineering, Drexel University, 3141 Chestnut St., Bossone 514, Philadelphia, PA 19104 and Giuseppe R. Palmese, Department of Chemical and Biological Engineering, Drexel University, 3141 Chestnut St., CAT 471, Philadelphia, PA 19104 |
Nanostructured Oxide for Energy Storage and Conversion
Donghai Wang, Pacific Northwest National Laboratory, Battelle/PNNL, MS:K3-59, Richland, WA 99354 |
Measuring and Modeling Fundamental Parameters from Gas Phase Electrophoresis
Leonard F. Pease III, Process Measurements Division, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899 |
Biomedical and Energy Applications of Lipids
Liangfang Zhang1, Steve Granick2 and Robert Langer1, (1)Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave., E25-342, Cambridge, MA 02139, (2)Departments of Materials Science and Engineering, Chemical Engineering, Chemistry, and Physics, University of Illinois at Urbana-Champaign, 1304 W. Green St., Urbana, 61801 |
Micro/nano/molecular Engineering of Soft Materials for Drug/gene Delivery and Biosensing
Jingjiao Guan, Ohio State University, 140 west 19th. Ave., Columbus, OH 43210 and L. James Lee, Chemical and Biomolecular Engineering, The Ohio State University, 125A Koffolt, 140 West 19th, Columbus, OH 43210 |
High Surface Area Ocvd Deposited Pyrrole-Co-Thiophene-3-Acetic Acid Conducting Copolymer Films for Resistance-Based Sensing Applications
Sreeram Vaddiraju1, Kris Senecal2 and Karen K. Gleason1, (1)Department of Chemical Engineering, Massachusetts Institute of Technology, 25 Ames Street, Bldg. 66, Rm. 419, Cambridge, MA 02139, (2)Macromolecular Science Team, US Army Research, Development and Engineering Command, Natick, MA 01760 |
What Can Fundamental Research on Metal and Metal Oxide Surfaces Contribute to Solutions of Global Energy and Environmental Problems?
Ling Zhou, School of Engineering and Applied Sciences, Harvard University, 29 Oxford Street, Cambridge, MA 02138 and Robert J. Madix, Division of Engineering and Applied Sciences, Harvard University, Pierce Hall, Cambridge, MA 02138 |
Self-Assembly of Magnetorheological Fluids Confined in Microfluidic Devices
Ramin Haghgooie, MIT, 77 Massachusetts Ave. 66-053, Cambridge, MA 02139 |
Computational and Experimental Studies of Protein-Self Assembly with Applications in Nanotechnology and Medicine
Troy Cellmer, Laboratory of Chemical Physics, National Institutes of Health, 9000 Rockville Pike, Building 5, Room 106, Bethesda, MD 20892 |
Probing the Molecular Mechanism of ATP Bioenergy Conversion: A Multifaceted Approach Integrating Computational Modeling, Protein Engineering, and Single Molecule Techniques
Jung-Chi Liao, Bioengineering, Stanford University, 345 Sheridan Ave #105, Palo Alto, CA 94306 |
Novel Nanomaterials Development in Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells
Zhongwei Chen, University of California, Riverside, A242 Bourns Hall, Chemical Engineering, Riverside, CA 92507 and Yushan Yan, Chemical and Environmental Engineering, University of California, Riverside, Bourns Hall A 242, Riverside, CA 92521 |
Nanomaterials for Energy Conversion
Michael P. Tate, School of Chemical Engineering, Purdue University, 480 Stadium Mall Dr, West Lafayette, IN 47907 and Hugh W. Hillhouse, School of Chemical Engineering and Energy Center at Discovery Park, Purdue University, 480 Stadium Mall Drive, West Lafayette, IN 47907 |
Sustainability, Green Engineering and Industrial Ecology
Arunprakash T. Karunanithi, U.S. Environmental Protection Agency, 26 W. Martin Luther King Drive, Cincinnati, OH 45268 |
Simulation Studies of Phase Behavior and Crystal Structures of Colloidal Suspensions
Antti-Pekka Hynninen, Dept. of Chemical Engineering and PRISM, Princeton University, Engineering Quadrangle, Princeton, NJ 08544 |
Large-Scale Synthesis of Salt and Metal Nanoparticles by Flame Synthesis and Application of Magnetic Nanobeads in Separation Technology
Robert N. Grass, Institute for Chemical and Bioengineering, ETH Zurich, Wolfgang-Pauli-Strasse 10, Zurich, Switzerland |
Combining Colloidal Chemistry and Microfluidics
Rhutesh K. Shah, School of Engineering and Applied Sciences, Harvard University, 40 Oxford Street, Cambridge, MA 02138 |
Properties of Surfaces and Films from Viscous Liquids to Elastic Solids
Hongbo Zeng1, Jacob N. Israelachvili1, Matthew Tirrell2 and L. Gary Leal3, (1)Chemical Engineering, University of California, 3357 Engineering II, Santa Barbara, CA 93106, (2)Chemical Engineering, University of California, Santa Barbara, Engineering 2, Room 3357, Santa Barbara, CA 93106-5080, (3)Chemical Engineering, University of California, Santa Barbara, Engineering 2, Rm 3357, Santa Barbara, CA 93106 |
Sustainable Alternatives for Chemical Processing
Jason P. Hallett, Department of Chemistry, Imperial College, South Kensington Campus, London, United Kingdom |
Cardiac Tissue Engineering Using Embryonic Stem Cell Derived Cardiomyocytes and Novel Biomaterials
Elizabeth A. Lipke, Department of Biomedical Engineering, Johns Hopkins University, Traylor Rm #703, 720 Rutland Ave., Baltimore, MD 21205 |
Self-Assembly of Functional Rod-Coil Block Copolymers
Bradley D. Olsen, Chemical Engineering, University of California, Berkeley, 201 D Gilman, Berkeley, CA 94720-1462 and Rachel A. Segalman, University of California at Berkeley, Dept of Chemical Engineering, 201 D Gilman, Berkeley, CA 94720-1462 |
Multiscale Modeling of Viscoelastic Flow and Complex Fluids in Micro/nanofluidics
Xin Hu, NSEC center for Affordable Nanoengineering of Polymer Biomedical Devices (CANPBD), The Ohio State University, Room 125A, 140 West 19th Ave., Columbus, OH 43210 and Ly James Lee, Chemical and Biomolecular Engineering, The Ohio State University, 125 Koffolt Labs, 140 W. 19th Ave., Columbus, OH 43210 |
A Systems Biology Approach to Protein Translation
Hermioni Zouridis, Chemical and Biological Engineering, Northwestern University, 2145 Sheridan Rd., Evanston, IL 60208 and Vassily Hatzimanikatis, Laboratory of Computational Systems Biotechnology, EPFL, CH-1015, Lausanne, Switzerland |
Modulating Catalytic Properties at the Gas-Solid Interface
Raj Ganesh Pala, Chemistry and Biochemistry, University of California, Santa Barbara, Department of Chemistry and Biochemistry 9510, University of California, Santa Barbara, CA 93106-9510 |
Towards Solid State Silicon Nano and Microwire Photovoltaic Devices
Michael A. Filler1, Brendan M. Kayes1, Morgan C. Putnam2, Michael D. Kelzenberg3 and Harry A. Atwater1, (1)Applied Physics, California Institute of Technology, 1200 E. California Blvd, MC 128-95, Pasadena, CA 91125, (2)Chemical Engineering, California Institute of Technology, 1200 E. California Blvd, MC 128-95, Pasadena, CA 91125, (3)Electrical Engineering, California Institute of Technology, 1200 E. California Blvd, MC 128-95, Pasadena, CA 91125 |
Metabolic Engineering of the Terpenoid and Indole Pathways in Catharanthus Roseus Hairy Roots
Christie A.M. Peebles, Rice University, Dept of Bioengineering, MS-142, PO Box 1892, Houston, TX 77251-1892, Susan I. Gibson, University of Minnesota, 322 Cargill Building for Microbial and Plant Genomics, 1500 Gortner Ave., St. Paul, MN 55108, Jacqueline V. Shanks, Chemical and Biological Engineering, Iowa State University, 2114 Sweeney Hall, Ames, IA 50011 and Ka-Yiu San, Department of Bioengineering, Rice University, MS-142, PO Box 1892, Houston, TX 77005 |
Effects of Confinement and Interfaces on Structural Relaxation of Thin Polymer Films above, below, and at the Glass Transition
Rodney D. Priestley, Chemical and Biological Engineering, Northwestern University, 2145 Sheridan Rd E136, Evanston, IL 60208 |
Engineering Extremophilic Chaperones for Biocatalysis and Nanobiotechnology
Timothy Whitehead, UC Berkeley, 201 Gilman Hall #1462, Berkeley, CA 94720 |
Computational Chemistry for Better Catalysis
N. Aaron Deskins, Chemical and Materials Sciences Division, Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA 99352 |
Modeling Biological Ligand Design with Pharmaceutical Accuracy
Michael R. Shirts, Department of Chemistry, Columbia University, Havemeyer Hall MC 3131, New York, NY 10027 |
Directed Differentiation and Tissue Engineering of Keratinocytes Derived from Human Embryonic Stem Cells
Christian M. Metallo, Lin Ji, Juan J. de Pablo and Sean P. Palecek, Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706 |
Engineering the Ribosome for the Development of New Technologies
Lydia M. Contreras, Cornell University, Chemical and Biomolecular Engineering, Ithaca, NY 14853 and Matthew P. DeLisa, Cornell University, Ithaca, NY 14850 |
Automating Development of Genome-Scale Metabolic Networks: Clostridium Acetobutylicum, a Known Singularity and Biofuel Production
Ryan S. Senger, Chemical and Biological Engineering, Northwestern University, 2145 Sheridan Road, Tech E250, Evanston, IL 60208-3120 and Eleftherios T. Papoutsakis, Dept. of Chemical Engineering, Delaware Biotechnology Institute, 15 Innovation Way, Newark, DE 19711 |
Enabling Microscopic Simulators to Perform System-Level Analysis of Viscoelastic Flows
Zubair Anwar, Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 66-258, Cambridge, MA 02139 and Robert C. Armstrong, Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, 66-544, Cambridge, MA 02139 |
New Materials for Reduced Cost, High Performance, Micro Direct Methanol Fuel Cells
William Mustain, Chemical and Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Dr., Atlanta, GA 30332 |
Insights on Biological and Material Properties of Nanoscale Systems from Multiscale Modeling, Simulation, and Experiment
Elaine R. Chan, Semiconductor Electronics Division, Electronics and Electrical Engineering Laboratory, NIST, 100 Bureau Drive, Gaithersburg, MD 20899-8120 |
Development of a Biomems Pulsatile Hormone Delivery System
Eric E. Nuxoll, Department of Pharmaceutics, University of Minnesota, 9-177 Weaver Densford Hall, 308 Harvard St. SE, Minneapolis, MN 55455 |
Molecular Engineering of Surfaces for Biomaterials and Biosensors
Matthew Bernards and Shaoyi Jiang, Chemical Engineering, University of Washington, Benson Hall, Box 351750, Seattle, WA 98195 |
Micro/nano Electrochemical Systems for Sensor and Energy Applications
Ilwhan Oh, Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign, 294 RAL, MC-712, 600 S. Mathews Ave., Urbana, IL 61801 |
Catalytic Routes for the Production of Fuels and Chemicals
Carsten Sievers1, Pradeep K. Agrawal1, Christopher W. Jones1 and Johannes A. Lercher2, (1)School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, 311 Ferst Drive, N.W., Atlanta, GA 30332-0100, (2)Department of Chemistry, Technische Universität München, Lichtenbergstrasse 4, Garching, 85747, Germany |
Solvent Design for Pharmaceutical Process
Charles Acquah, Chemical Engineering, University of Connecticut, Storrs, CT 06269 |
Copper Electrodeposition Onto Resistive Ruthenium Substrates in the Presence of Solution Additives
Jennifer Younker, Chemical and Biomolecular Engineering, Universisty of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801 |
Nanocomposites of Polyurethane Elastomers
J. J. Huang1, S. M. Liff2, G. H. McKinley2 and M.C. Boyce3, (1)Mechanical Engineering and Institute for Soldier Nanotechnologies, Massachusetts Institute of Technology, Building NE 47-511, 77 Massachusetts Avenue, Cambridge, MA 02139, (2)Mechanical Engineering, Massachusetts Institute of Technology, Building NE 47-511, 77 Massachusetts Avenue, Cambridge, MA 02139, (3)Mechanical Engineeering, Massachusetts Institute of Technology, Building NE 47-511, 77 Massachusetts Avenue, Cambridge, MA 02139 |
Multiscale Approaches towards Nanomaterials Design: Microporous Thin Films and Nanoparticle Assemblies
Mark A. Snyder, Department of Chemical Engineering and Materials Science, University of Minnesota, 421 Washington Ave. SE, Minneapolis, MN 55455 |
Engineering Novel Surfaces to Control Cell Adhesion and for Drug Delivery Applications
Srivatsan Kidambi, Center for Engineering in Medicine, Massachusetts General Hospital, Shriners Hospital, Harvard Medical School, 51 Blossom Street, Boston, MA 02114 |
Time-Series Transcriptomic Analysis of a Systematically Perturbed Arabidopsis Thaliana Liquid Culture System: A Systems Biology Perspective
Bhaskar Dutta, University of Maryland, 2113 Chemical and Nuclear Engineering Building, College Park, MD 20742-2111 and Maria Klapa, Institute of Chemical Engineering and High-Temperature Chemical Processes, Foundation for Research and Technology-Hellas (FORTH), Stadiou St., Platani, Patras, Greece |
Analysis of Transcription Networks
Mark P. Brynildsen and James C. Liao, Chemical and Biomolecular Engineering, University of California, Los Angeles, 420 Westwood Plaza, 5531 Boelter Hall, Los Angeles, CA 90095 |
Targeted Intracellular Delivery of Drugs and Genes
Yah-el Har-el, Russell H. Morgan Dept. of Radiology and Radiological Science, Johns Hopkins University, 1150 Orleans St., Cancer Research Building 2, Room 4M62, Baltimore, MD 21231 |
Applications of Flux Analysis to Plant Oilseeds
Doug K. Allen, Department of Plant Biology, Michigan State University, S-302 Plant Biology Building, East Lansing, MI 48824 |
Sensor-Aided Bioprospecting
Karen M. Polizzi, School of Biosciences, University of Exeter, Geoffrey Pope Building, Stocker Rd, Exeter, United Kingdom |
Generation of Renewable Fuels and Chemicals from Lipids Via Supercritical Fluid Processing
Darrell L. Sparks, Chemical Engineering, Mississippi State University, Box 9595, Mississippi State University, MS 39762 |
Control of the Interspecies Biofilm Signal Indole in Pathogenic E. Coli O157:H7 and Pseudomonas Aeruginosa and Proteome and Transcriptome Analysis of Engineered E. Coli for Aerobic Mineralization of Cis-1,2-Dichloroethylene
Jintae Lee and Thomas K. Wood, Artie McFerrin Department of Chemical Engineering, Texas A&M University, 200 Jack E. Brown Building, MS 3122, College Station, TX 77843-3122 |
Bridging the Scales: From Contact Mechanics to Fluidized Beds
Gustavo G. Joseph, Chemical and Biological Engineering, University of Colorado, Boulder, CO 80309-0424 |
Detection and Analysis of Biomolecules Using Diagnostic Microfluidic Systems
Edgar D. Goluch, Department of Bioengineering, University of Illinois at Urbana-Champaign, 3225 Micro and Nanotechnology Lab, 208 North Wright Street, Urbana, IL 61801 |
Engineering Peptides to Build Inorganic Materials
Scott K. Stanley, Polymers Division, National Institute of Standards and Technology, 100 Bureau Drive, Stop 8541, Gaithersburg, MD 20899 |
Crowding and Confinement in Fluids and Biological Systems
Jeetain Mittal, Laboratory of Chemical Physics, National Institute of Health, Bethesda, MD 20892 |
Utilizing Surface Science to Improve the Attachment of a Biopolymer Coating on Titanium, An Implant Metal
Holly J. Martin, Dave C. Swalm School of Chemical Engineering, Mississippi State University, 330 Swalm - President's Circle, Mississippi State, MS 39762 and Kirk H. Schulz, Vice President for Research and Economic Development, Mississippi State University, 617 Allen Hall, Mississippi State, MS 39762 |
Liquid Fuel Production Via the Integration of Glycerol Processing Over C-Supported Pt-Re Catalysts with Fischer-Tropsch Synthesis
Dante A. Simonetti1, Edward L. Kunkes1, Jeppe Rass-Hansen2, Ricardo R. Soares3 and James A. Dumesic1, (1)Department of Chemical and Biological Engineering, University of Wisconsin - Madison, 1415 Engineering Drive, Madison, WI 53706, (2)Department of Chemistry, Center for Sustainable and Green Chemistry--Danish Technical University, Lyngby, Denmark, (3)Faculdade de Engenharia Química, Universidade Federal de Uberlândia, Av. João Naves de Ávila 2121, Uberlandia, Brazil |
First Principles Studies of Energy Materials
Devina Pillay, Naval Research Laboratory, 4555 Overlook Ave. S.W., Washington, DC 20375 |
Engineering of Biomolecules in Micro/nanofluidics and Its Applications
Shengnian Wang, Department of Chemical and Biomolecular Engineering, The Ohio State University, 140 West 19th Avenue, Columbus, OH 43210 |
Molecularly Engineered Nanoporous Adsorbents: Synthesis, Characterization, and Application
T. Grant Glover, Department of Chemical Engineering, Vanderbilt University, VU Station B 351604, 2301 Vanderbilt Place, Nashville, TN 37235-1604 |
Using Gene Expression Microarrays to Study Drug Response in Mouse Stem Cells
Keith R. Shockley, Computational and Systems Biology, The Jackson Laboratory, 600 Main Street, Box 303, Bar Harbor, ME 04609, Beata Lecka-Czernik, Department of Orthopaedic Surgery, University of Toledo College of Medicine, Center for Diabetes and Endocrine Research, 3035 Arlington Avenue, Mail Stop 1008, Toledo, OH 43614, Clifford J. Rosen, The Jackson Laboratory, 600 Main Street, Box 2, Bar Harbor, ME 04609 and Gary A. Churchill, The Jackson Laboratory, 600 Main Street, Box 35, Bar Harbor, ME 04609 |
|