![[ Visit Client Website ]](images/banner.gif)
The Intermittent Simulated Moving Bed (I-SMB) Process,
Modeling of Aggregation and Breakup of Colloidal Particles in a Turbulent Stirred Tank through a Multizonal PBE Model,
Restructuring Phenomena in the Aggregation of a Colloidal Latex in a Turbulent Stirred Tank,
Characterization of Crystal Breakage Using 2D Particle Size Distribution
Design of Water Networks Using Rigorous Models,
A Novel Strategy for Global Optimization of MINLP Models,
Efficient Breadth-First Tree Search Method for Nonlinear Sensor Network Design,
Smart Plant Approach to Increased Plant Profitability,
Planning Model of Water Networks,
On the Appropriate Modeling of Process Plant Water Systems for Zero Liquid Discharge,
MILP Formulation for the Retrofit of Heat Exchanger Networks
Effect of Sparse Long-Chain Branching On the Film-Casting Behavior for a Series of Well-Defined HDPEs,
Tracking Phase Separation Kinetics in Block Copolymer Solutions Using Rheology,
Effects of Processing Conditions On Properties of Poly(arylene ether sulfone) Films for Polymer Electrolyte Membrane Applications,
Transient Rheology of a Polypropylene Melt Reinforced with Long Glass Fibers,
Complete Fiber Orientation Analysis for a Short Glass Fiber Reinforced Center-Cated Disk Using the Shadow Optical Microscopy Analysis,
Improvement in Simulation of Highly Concentrated Fiber-Reinforced Composites,
Visualization of Fiber Orientation IN Short Glass Fiber Thermoplastic COMPOSITES USING A Virtual Reality MODELING Language (VRML) Tool,
Preparation of Carbon Nanotube Composite Materials Using the Combination of Supercritical CO2 and Orientation Techniques
Environmentally Conscious Process Design - Identifying Tradeoffs Between Environmental Protection and Economic Viability at Different Scales,
Understanding Sustainability Based On the Thermodynamics of Industrial and Ecological Systems,
Life Cycle Assessment of Multi-Megawatt Wind Turbines with Carbon Nanofiber-Modified Rotors,
Synergy of Technological and Ecological Systems for Self-Reliant Process Design,
Integrated Multiscale Modeling of Economic-Environmental Systems for Assessing Biocomplexity of Material Use,
Accounting for Ecosystem Services in Ecologically Based Life Cycle Assessment (Eco-LCA) by Combining Qualitative and Quantitative Information
Low-Dimensional Models for Taylor Dispersion,
Fundamentals Based Low-Dimensional Combustion Models for Control and Optimization of IC Engines,
Modeling of Spatio-Temporal Effects in a Lean NOx Trap Using Global Kinetics,
Low-Dimensional Models for Real Time Simulations of Catalytic Monoliths,
Internal Mass Transfer Coefficients for Modeling of Diffusion and Reaction in Washcoated Catalytic Monoliths,
Effects of Rh, CeO2 and Regeneration Conditions During NOx Storage and Reduction On Pt/Rh/BaO/CeO2 Monolith Catalysts,
Modeling the Effect of Pt Dispersion and Temperature During Anaerobic Regeneration of a Lean NOx Trap Catalyst,
Isotopic Studies of Nox Storage and Reduction Over Pt/BaO/Al2O3 Using Temporal Analysis of Products,
Influence of Heterogeneities in Activity and Conductivity On Stationary and Moving Patterns in Catalytic Reactors
Material Balance for Leading Pretreatment Processes Including Sugar Conversion Using Switchgrass as Feedstock,
Potential for Biofuel and Animal Feed Production From Native Prairie Grasslands,
Synergistic Interactions Between Fungal and Bacterial Glycosyl Hydrolases On Ammonia Fiber Expansion Treated Corn Stover,
Enhanced Enzymatic Digestibility of Crystalline Cellulose After AFEX Treatment: The Role of Cellulose I Conversion to Other Alloforms
Designing Synthetic Cilia to Regulate Fluid Flow and Particle Transport in Microfluidic Devices,
Harnessing Light to Guide the Motion of Chemo-Responsive Polymer Gels,
Modeling the Interactions of Amphiphilic Nanotubes and Lipid Bilayers,
Collective Behavior of Self-Propelled Microcapsules,
Using Coarse-grained Computer Simulations to Probe Interactions between Nanoparticles and Lipid Bilayers
Kinetic Monte Carlo Simulation of Surface Segregation in Platinum-Based Alloys Under O2 Adsorption and Reaction,
Role of Catalyst Nanoparticle Size On the Growth of Single-Walled Carbon Nanotubes,
Evaluation of a Molecular Spring Nanothermometer,
Formation of Carbon Structures On Stepped and Chiral Surfaces,
Physico-Chemical Effects On Adsorbates Confined Between Metallic Surfaces,
Surface Atomic Distribution and Water/Atomic Oxygen Adsorption On Pt-Co Alloys
Development of Antioxidant Polymeric Nanoparticles for the Suppression of Doxorubicin Mediated Vascular Chemotoxicity,
Therapeutic Antioxidant Polymers as a Potential Polymeric Material for Coating Medical Devices,
Cytotoxicity of An Antioxidant Polymer, Poly(trolox) and Its in Vitro Protective Effect against An Oxidative Stress Injury
Electrochemical Detection of 2,4,6-Trinitro-Toluene,
A Peptide Based Separator for 2,4,6- Trinitro-Toluene,
Cofactor Engineering of a Thermostable Aldo-Keto Reductase Enzyme: Altering Cofactor Specificity and Development of a Novel Directed Evolution Selection Platform,
Identification of Troponin I Binding Peptides Using Phage Display for Biosensor Development,
Directed Evolution of Allosterically Regulated Beta Roll Subdomains for Biomolecular Recognition,
Directed Evolution of Novel Cell Penetrating Peptides for Delivery to the Brain,
Engineering Tools for Analysis of Intrinsically Disordered Proteins: Entropic Stabilization Enables a Type I Secretion Calcium Switch
Embedded Sphere Method for Measuring Dielectric Breakdown in Polymers and Polymer Composites,
Synthesis and Dielectric Characterization of Polystyrene Composites Containing Surface-Modified Titanates and Novel Mixed-Metal Phosphonates,
Thermal, Mechanical, and Barrier Properties of PET-Platelet Nanocomposites,
Quantitative Analysis of Synthetic Platelet Exfoliation in Water and Platelet Aspect Ratio Distribution,
Poly(vinyl alcohol)-Platelet Nanocomposites: Preparation, Characterization and Gas Barrier Properties
Enhancement of C02 and CH4 Separation Via Amino-Functionalisation of the MIL-53 Metal-Organic-Framework,
Shape Selective Separation of n- and Iso-Alkanes Using Carbon-Silica Composites,
Low Coverage Adsorption Properties of Hydrocarbons On the Metal-Organic Framework MIL-47 Studied by Monte Carlo Simulations and Pulse Chromatography
Using Magnetic Nanoparticles to Probe the Stability of Polymer-Coated Colloids,
Nanoscale Viscosity Measurements Using Magnetic Nanoparticles,
Synthesis, Colloidal Stability, and Magnetic Properties of Nanoparticles for Magnetic Fluid Hyperthermia,
Effect of Core Material and Graft Molecular Weight On the Energy Dissipation Rate of Magnetic Nanoparticles in Oscillating Magnetic Fields,
Effect of Graft Molecular Weight On the Colloidal Stability of Iron Oxide Nanoparticles with Grafted Poly(ethylene glycol)
Reverse Osmosis Desalination Research in the Undergraduate Laboratory,
A Novel Approach and System for Rapid Field Evaluation of Water Desalination,
Modeling and Control of An Experimental Reverse Osmosis Water Desalination System,
Rapid Reverse Osmosis (RO) Membrane Performance Analysis Using An Autonomous RO Desalination System
Poly(ethylene glycol)-Based Hydrogel Nanocomposites with Iron Oxide and Single-Walled Carbon Nanotubes for Hyperthermia Cancer Therapy,
Award Submission: Radiofrequency Actuation of Iron Oxide-Hydrogel Nanocomposites: Experimental Analysis and Modeling,
Radiofrequency Actuation of Iron Oxide-Hydrogel Nanocomposites: Experimental Analysis and Modeling
Coal Power Generation with High Efficiency and near-Zero Emissions,
Synthesis and Steady-State Optimization of a Continuous Pharmaceutical Process,
Natural Gas Power Generation with High Efficiency and near-Zero Emissions,
Tight Interval Bounds for the Parametric Solutions of Sytems Biology Models,
Global Optimization of Fixed-Point Iterations,
Nonlinear Convex and Concave Relaxations for the Solutions of Parametric Ordinary Differential Equations,
Affine Lumping Formalism for Comparison of Projection-Based Model Reduction Techniques,
Effective Parameter Estimation within a Multi-Dimensional and Multi-Scale Population Balance Model Framework,
Rapid Interval Arithmetic Screening of Continuous Pharmaceutical Processes,
Parametric Interval Newton Methods,
Range-Constrained Simultaneous Reaction and Species Elimination in Kinetic Mechanisms
‘Award Submission': Trafficking of Nanoparticles to Intracellular Aggresome-Like Strucutres: Implications for Non-Viral Gene Delivery,
Trafficking of Nanoparticles to Intracellular Aggresome-Like Strucutres: Implications for Non-Viral Gene Delivery,
Parallel Synthesis and Screening of Polymers for Non-Viral Gene Delivery
The Study of Bovine Serum Albumin Deformation and Adhesion to Self-Assembled Monolayers Using Atomic Force Microscopy,
Particle Adhesion in Microelectronics Processing,
Effect of Substrate Roughness On Nano-Silica Coated Micron-Scale Particle Adhesion,
Comparison of Polysaccharide Coatings to Limit Protein Adsorption On Polydimethylsiloxane
Structure and Transport in Monolayers of Charged Colloid Particles at Oil-Water Interfaces: The Role of Oil Soluble Surfactant,
Effects of Added Surfactant On Particle Stabilized Emulsion Droplets,
Particle Charging and Stabilization in Non-Polar Liquids by Reversed Surfactant Micelles,
Screened Pair Interaction of Charged Colloidal Particles in Liquid-Liquid Interfaces,
Hetero-Aggregates as Particulate Emulsifiers and the Role of Surface Roughness
Identification, Characterization, and Affinity Tail Design Based On Native Proteins of Escherichia Coli BL-21 That Display Affinity towards Immobilized Metal Affinity Chromatography and Hydrophobic Interaction Chromatography Matrices,
Fermentation and Expression of Biopolymer Conjugates Used in Gene Therapy Treatments,
Knockout and Mutational Tailoring of Host Strains to Simplify Bioseparation,
Bioprocess Optimization for the Production of Biopolymer Conjugates Useful for Gene Therapy Applications
Intrinsic and Apparent Kinetics for the Alkylation of Benzene Over H-ZSM-5 – A Multiscale Investigation From the Molecular Level to the Reactor,
A Novel Approach to Synthesis of Highly Selective Pt/Mg(Al)(Ga)O Catalysts for the Dehydrogenation of Alkanes to Alkenes and Hydrogen,
Effects of Ligand Composition On the Activity of Rh(III) for the Oxidative Carbonylation of Toluene to p-Toluic Acid,
Biomass Dissolution and Conversion to Transportation Fuels in Ionic Liquids,
Characterization of Model Vanadium Oxo Catalysts On Silicon Wafer Substrates
Morphological and Rheological Effects of Supercritical Carbon Dioxide Processing of Polystyrene-Clay Nanocomposites,
Supercritical Carbon Dioxide Processed Rubber-Clay Nanocomposites: Structure, Rheology and Mechanical Behavior,
Supercritical Carbon Dioxide Processed PDLA Nanocomposite Foams as Resorbable Bone Graft Substitutes
Operation of Polymer Electrolyte Membrane Fuel Cells with Dry Feeds. Design and Operating Strategies,
Mechanical and Transport Properties of Nafion: Effects of Temperature and Water Activity,
Hydrogen-Carbon Dioxide Separation by Electrochemcial Pumping,
Water Motion and Local Current Density in PEM Fuel Cells,
Water Permeation through Nafion Membranes. the Role of Water Activity
A Lecture, Demonstration, and Simulation to Teach Chemical Process Control Basics to High School STEM Instructors,
Rigorous Dynamic Modeling and Model Predictive Control of Air Separation Unit as Part of IGCC Power Plant,
Comparison of Different Controller Designs for Plantwide IGCC Control,
Advances in Control Algorithms for Blood Glucose Regulation in the Intensive Care Unit (ICU)
Impact of Sol Molecular Weight and Architecture On the Mechanical Performance and Toughness of Polymeric Gels,
Modifying the Properties of Nanocomposite Triblock Copolymer Gels through Filler Size and Surface Chemistry,
Enhanced Conductivity and Melt Processing of Filled Polymer Composites through the Addition of A Low Melting Eutectic Metal,
Structural and Mechanical Properties of ABA/AB Gels: Dissipative Particle Dynamics Study
Basic and Applied Studies in Biologically Relevant Polymer Thin Films,
Polymer-Based Amplification of Cellular Protein Detection,
Fluorescent Polymerization-Based Signal Amplification of Antigenic Binding Events for Immunofluorescent Imaging of Cells,
Polymerization Enhanced Immunofluorescent Staining,
Kinetic Investigation of Enzymatic Initiation of Biocompatible Polymer Thin Films
Real-Time Study of Stretching of Molecular Junctions Between Nanoparticles: An Avenue to Build Molecular-Electromechanical Devices,
Reversible, Ultrafast Switching of Azo-Benzene-Tethered On Graphene FETs,
Ultrafast, Highly Sensitive Label-Free Pathogen Detection Via Chemically Modified Graphene (CMG) Sensors,
High-Throughput, Ultrafast Synthesis of Solution Dispersed High-Quality Graphene Via a Novel Hydride Chemistry: Raman Spectra and Electrical Gating,
Novel Chemical Schemes to Functionalize Graphene without Introducing Defects: Avenue for Building Sensitive Graphene Sensors,
Dendritic (Snow-Flake-Shaped) Gold-Nanostructures Templated On Graphene: Tuning Electrical Properties and Raman Spectra,
Microwave Induced in-Situ Deposition of Gold and Silver Nanostructures On Graphene: Avenue to Build Graphene-Metal Interfaces,
Wrapping of a Single Live Bacterium by Biochemically Modified Graphene (BMG) Sheets: Avenues to Build Nano-Biomachines
Desorption of CBH1 From BMCC Substrate Is a Function of Enzymatic Activity,
Interaction of the Enzyme with Substrate Is the Most Significant Factor Accounting for Enzyme Deactivation in the Enzymatic Hydrolysis of Cellulose,
Comparison of Computed and Measured Wall Shear Stress in An Orbiting Cell Culture Dish,
Effects of Oscillatory Fluid Shear Stress On Endothelial Cellular Responses in the Presence of LTB4 and LPS
Online Maintenance of Multivariate Statistical Soft Sensors for Quality Monitoring in Batch Processes,
Surface Characterization and Quality Monitoring of Polymer Nanofibre Membranes Using Multivariate Image Analysis,
Multiscale Modelling of a Typical Industrial Oxidation Reactor for Terephthalic Acid Production Via a Hybrid Multizonal-CFD Approach
Rheology and Stability Considerations in Processing of Bio-Oils,
Predicting the Effect of Homogenization Pressure On Emulsion Drop Size Distributions,
Hydrophobically-Modified Alginate Gels with Improved Mechanical and Drug Release Characteristics,
Expediting the Wound Healing Process Using An Improved Alginate Wound Dressing
Reduction of Immobilized Metal Ions to Zero-Valent Nanoparticles On Functionalized Silica for Dechlorination,
Synthesizing Iron and Iron Oxide Nanoparticles in the Membrane Domain for Reactions at Interfaces,
Novel Pervaporation Membranes for Separation of Solvent/Water Mixtures,
Enriching the Undergraduate Chemical Engineering Curriculum through Tracks: A Case Study of the Biopharmaceutical Engineering Track at the University of Kentucky,
Functionalized Membranes for Iron Capture and Subsequent Free Radical Reactions,
Synthesis of Nanostructured Metals in MF Membranes with Applications to Toxic Organic Dechlorination
Mathematical Modeling of a Transient 1D Entrained-Flow Texaco Gasifier Using Aspen Custom Modeler,
Steady State Modeling and Optimization Studies of a Tubular Proton Exchange Membrane Fuel Cell (PEMFC) Validated with Experimental Studies,
Dynamic Modeling of the Modifed Claus Process,
Development of a Plant-Wide Dynamic Model of An Integrated Gasification Combined Cycle (IGCC) Plant,
Multi Catalyst Layer Modeling of a PEM Fuel Cell Cathode
LiMn(BH4)3 for On-Board Hydrogen Storage,
Bisphosphonate Modified Gold Nanoparticles to Study Bone Resorption,
Composition Effect of Ag-Cu Alloy Nanoparticles On Luminescence Enhancement/Quenching of Vicinal Luminophores,
Fluorescence Quenching of CdSe/ZnS Nanocrystals near Copper Nanoparticles in Aqueous Solution,
Complex Borohydride for Reversible Hydrogen Storage
Microcavity Induced Acoustic Streaming Enhancement in a Surface Acoustic Wave Device Based On Langasite,
Integrated Focused and Conventional Transducer Configuration On a Single Piezoelectric Device for Simultaneous Biosensing and Biofouling Removal,
Orthogonal SAW Device Based On Langasite for Simultaneous Biosensing and Biofouling Removal: A Fluid Structure Interaction Study,
Multiple Biomarker Detection Using SH-SAW Resonator Array,
Effect of Cluster Size On CO Adsorption and Dissociation On Cobalt Catalysts: DFT Studies Using Cluster Models,
Hexagonal Surface Acoustic Wave Sensor for Multiple Biomarker Detection in Biosensing Applications
Theoretical Investigation of the Asymmetric Alkylation of Benzaldehyde in Presence of Organozinc Reagents,
Interactions of Epoxy-Based Polymers with Carbon Nanotubes Studied by Molecular Modeling,
Microscopic Structure, Thermodynamic and Transport Properties of Ionic Liquids: Molecular Simulations and Theoretical Predictions
Fuel Cell System Integration Via Reduced Order Methods,
Transport and Reaction Processes in Non-Homogeneous Porous Media for Fuel Cell Applications,
Nonlinear Observer Based Robust and Offset Free Nonlinear Predictive Control of Air Separation Units in Power Plants,
Estimation of the Arrival Cost in MHE Using Particle Filters,
Online Model Maintenance and Robust Adaptive Nonlinear Model Predictive Control,
Inverse Modeling of Solid Oxide Fuel Cells,
Experimental Design of Dynamic Temperature-Programmed Reduction (TPR) Experiments,
Nonlinear Programming Based Methods for PCA Parameter Estimation Using Data with Missing Elements,
Molecular Modeling of Proton Transport in Polymer Electrolyte Membrane
A Trust-Region Algorithm for the Optimization of PSA Processes Using Reduced Order Modeling,
Optimal Integrated Design of Air Separation Unit and Gas Turbine Block for IGCC Systems,
A General Nonlinear Programming Algorithm for the Optimization of Problems with Dense Constraint Jacobians,
Parameter Identification and Dynamic Optimization of Seeded Suspension Polymerization Process,
Numerical Regularization for Singular Optimal Control Problems
The Use of Nanoporous Silicon for Advanced Rechargeable Lithium-Ion Batteries,
A Magnetic Colloidal Force Probe to Measure Nanometer Spacing Via Optical Imaging,
Structural Transitions of Nanoparticle Assemblies Mediated by Polymer Interactions at An Air-Water Interface,
Aggregation of Two-Dimensional Microparticle Structures in Ferrofluids,
Measuring the Elasticity of Semiflexible DNA-Linked Colloidal Chains Via Thermal Fluctuations,
Microfluidic Formation of Ionically Crosslinked Polyamine Gels,
Adjusting the Curvature of Supported Lipid Bilayers by Controlling Surface Interactions
Carbon-Supported Platinum and Palladium Nano-Particle Catalysts for Vapor-Phase Hydrogenation of Furan, Crotonaldehyde and Selective Hydrogenation of Acetylene,
Supported Bimetallic Cu/Ni Nanoparticles for Low–Temperature Water-Gas-Shift Reaction,
The Catalytic Significance of Surface Ab Planes of M1 Phase in Propane Ammoxidation
Predicting the Micellization Behavior of Perfluorinated and Partially-Fluorinated Surfactants in Dilute Aqueous Solution Using Computer Simulations and Molecular-Thermodynamic Theory,
A Monte-Carlo, Single-Chain Mean-Field Theory for Computation of the Free Energy of Packing End-Tethered Poly(Ethylene Glycol) Brushes in Water: Application to Colloidal Steric Stabilization and Alkyl Ethoxylate (CiEj) Nonionic Surfactant Micellization,
Molecular Dynamics Simulation Study of Pure and Surfactant-Laden Water Surfaces: Comparison of Flexible Water Models,
Application of the Aqueous Porous Pathway Model to Validate the Ιn Vitro Split-Thickness Skin Model for Ultrasound/Surfactant-Enhanced Transdermal Drug Delivery
The Adsorptions of the CO2 On Rumpled CaO (0 0 1) Surface and the Effect of Water Vapor Investigated by Density Functional Theory,
Prediction of Physical Properties of An Emerging Class of Compounds,
Longitudinal Contact with Individual Students as a Route of Encouraging Self-Determination in Chemical Engineers
Reactivity of Singlet Oxygen Generated Using Nanoporous Silicon for Transformation of Acrylonitrile,
On Significance of Thermophysical Properties of Energetic Materials,
Vapor Pressures and Melting Points of Select Munitions Compounds,
Degradation and Transformation Studies of 2,4 -Dinitroanisole (DNAN) On Nanoparticles of Magnesium and Zinc Oxide Nanomaterials
An Algebraic Approach for Solving Molecular Design Problems Using Higher Order Property Operators,
Integrated Process and Molecular Design Using Molecular Property Operators Based On Signature Descriptors,
Simultaneous Process and Product Design Using a Property Based Algebraic Approach,
Integrated Flowsheet and Molecular Design Using Molecular Signature Descriptors
Optimization of An α-Amino Ester Hydrolase for the Synthesis of β-Lactam Antibiotics,
Cross-Catalytic Activity Across Two Subgroups of the Enolase Superfamily,
Multivariate Statistical Analysis of X-Ray Spectra From Cellulose: A New Method to Determine Degree of Crystallinity and Predict Hydrolysis Rates,
Deactivation of TEM-1 Beta-Lactamase Investigated by Isothermal Batch and Non-Isothermal Continuous Enzyme Membrane Reactor Methods
Towards Model-Based Optimal Design of Lithium-Ion Batteries,
Modeling Capacity Fade of Lithium-Ion Batteries – Challenges in Identifying and Quantifying Possible Mechanisms,
Dynamic Optimization of Lithium-Ion Batteries – Current Profiles for Improved Utilization,
Estimation of Optimal Operating Profile of PEMFC Using Dynamic Optimization Technique
Utilizing Novel Microbubbles for Efficient Delivery of Plasmid DNA to Tumors,
Stability of Size-Selected Microbubbles,
Engineering Microbubbles with the Buried-Ligand Architecture for Tumor Targeting,
Development of “Bulky” Lipid Microbubbles for Ultrasound Triggered Drug Delivery,
High-Frequency In Vivo Ultrasound Imaging of Size-Isolated Microbubbles
A Three-Dimensional Computational Fluid Dynamics Study of Ozone Absorption in the Respiratory Tract,
Formation of High Aspect-Ratio Solid Silicon Wires within Optical Fibers Using High Pressure Chemical Fluidic Deposition,
An Experimental Study of the Radial Penetration of Non-Newtonian Fluids in Thin Porous Substrates,
Wetting Behavior of a Nanodroplet On a Heterogeneous Solid Surface
Understanding Long-Term Changes in Microbial Fuel Cell Internal Resistances Using Electrochemical Impedance Spectroscopy,
Conversion of Fermentation Inhibitors and Byproducts in Biorefinery Recycle Water Into Electricity,
Use of Microbial Fuel Cells for Produced Water Treatment,
Neutron Imaging of An Enzyme Fuel Cell,
Potential for Hydrogen Production Using Microbial Electrolysis Cells From Biorefinery Recycle Water
Effects of Synthetic Linear and Cyclic Peptide Analogs On Liposome Phase Behavior, Transport, and Morphology,
Formation and Characterization of Bilayer-Decorated Magnetoliposomes,
Liquid and Super Critical CO2 Transport through Surface Modified Hydrophobic Mesoporous Ceramic Membranes,
Cationic Multifluorescent Quantum Dot Liposomes for Cancer Cell Imaging
Effects and Roles of Air Feed On the Noncatalytic Gasification of Jet Fuel in Supercritical Water,
Effects of Varying Water-to-Glycerin Molar Ratio for Supercritical Water Reformation of Glycerin,
Synthesis Gas Production by Noncatalytic Reforming of Glycerin in Supercritical Water: Effect of Reaction Temperature,
The Effects of Space Time Upon the Supercritical Water Reformation of Glycerol
Photochemical and Thermally Adaptable Networks,
Polymer-Based Amplification of Cellular Protein Detection,
Photochemical Adaptable Networks,
Fluorescent Polymerization-Based Signal Amplification of Antigenic Binding Events for Immunofluorescent Imaging of Cells,
Kinetic Investigation of Enzymatic Initiation of Biocompatible Polymer Thin Films
Identification of Dominant Mechanisms for Capacity Fade of Lithium-Ion Batteries,
Towards Model-Based Optimal Design of Lithium-Ion Batteries,
Mechanistic Modeling of PLGA Microparticle Drug Delivery Systems,
Modeling Capacity Fade of Lithium-Ion Batteries – Challenges in Identifying and Quantifying Possible Mechanisms,
Design of PLGA Microparticle Drug Delivery Systems Using Mechanistic Reaction-Diffusion Model,
Dynamic Optimization of Lithium-Ion Batteries – Current Profiles for Improved Utilization,
Model Identification of Blown Film Extrusion,
Expediting the Numerical Simulation of Lithium-Ion Battery Models,
The Role of Automatic Process Control In QbD,
Multiscale Simulation in Science and Engineering
Development and Testing of a Proposed Protocol for Tar Sampling for a Biomass Gasification System,
Biomass Gasification: Steam Reforming of Tars Using Nickel Supported Montmorillonite,
Stability of Pyrolysis Oils Produced From Auger and Entrained Flow Reactors,
Modification and Testing of a Natural Gas Combustion Unit to Accept Biomass as a Fuel Source,
Laboratory-Scale Pyrolysis of CCA-Treated Wood Waste for Metals Recycle,
Design and Operation of a Laboratory-Scale Pyrolysis System,
Bio Conversion of Glycerol to Methane and Hydrogen,
Increasing the Economic Efficiency of a Biomass Feedstock Used for Greenhouse Heating,
Life Cycle Assessment of Wood Pyrolysis for Bio-Oil Production for Use as a Wood Preservative
Molecular Modeling of Small Chiral Molecules in a Homochiral Metal-Organic Framework,
Monomer-by-Monomer Sequences along Gradient Copolymer Chains Predicted by Kinetic Monte Carlo Simulations,
Investigation of Framework Effects On Epoxidation Catalysis in a Metal-Organic Framework,
Modeling Electronic and Steric Effects On An Immobilized (salen)Mn Catalyst,
Autoacceleration in L-Proline-Catalyzed Aldol-Type Reactions: A DFT and Microkinetic Modeling Study,
Investigation of Reactive Center Substituent Effects On the Primary Reaction Classes During Silicon Hydride Pyrolysis: Novel Methodology for Arrhenius Parameter Estimation,
Detailed Mechanistic Modeling of High-Density Polyethylene Pyrolysis: Low Molecular Weight Product Evolution,
From Thermoplastics to Biofuels: Analysis and Discovery of Complex Reaction Networks,
Kinetic Monte Carlo Simulations to Predict and Design Explicit Monomer Sequence along Copolymer Chains
Production of Biofuel From Biomass Via Fast Pyrolysis and Hydrotreatment Processes,
Reactivity and Carbon Deposition Study On Steam Reforming of Bio-Oil,
Product Distribution From Fast Pyrolysis of Hemicellulose,
Production of Ethanol From Biomass-Derived Syngas,
Production of Fisher-Tropsch Liquids From Biomass-Derived Syngas,
Catalytic Steam Reforming of Water Extracted Bio-Oil Fractions
Enhancing the Sustainability, Recyclability and Properties of PLA, PET, and Polypropylene Via Novel Low-Temperature Processing of Homopolymers and Composites with Cellulose,
Polymer-Graphite and Polymer-Carbon Nanotube Naoncomposites Processed by Solid-State Shear Pulverization: Major Enhancements in Mechanical Properties, Thermal Stability, Crystallizability, and Electrical Conductivity
PAT Applied to Understanding and Controlling the Removal of Dissolved Gases From Processes in API Development,
Applications of Quality by Design Principles Utilizing Process Modeling and PAT in the Development of An API Process,
Particle Size Distribution Control of Zwitterionic Crystal Forms,
Correlating Powder Flowability to Particle Size Distribution Using Chemometric Techniques
Microfluidic Pneumatic Logic Circuits and Digital Pneumatic Microprocessors,
Acoustically-Driven Programmable Liquid Motion Using Resonance Cavities,
Rapid Arraying of Particles and Cells in Three-Dimensional Microfluidic Devices,
Microfluidics Enabled Parallel Co-Cultivation of Compartmentalized Human Microbiota: Towards Elucidation of Microbial Interactions
Transverse Migration of a Polyelectrolyte Driven by a Combination of Electrophoresis and Pressure-Driven Flow,
Rheology and Microstructural Development in Oscillating Suspensions of Non-Colloidal Spheres,
Migration Mechanisms for Rigid Polymers and Nanorods Sheared at High Peclet Number,
Direct Comparison of the Static and Dynamic Properties of a Semi-Flexible Polymer Calculated Using Lattice-Boltzmann and Brownian Dynamics Simulations,
A Cloud of Rigid Rods Sedimenting in Viscous Fluid
Correlating the Structure and Properties of Imprinted Gels with Reaction Parameters,
Performance Analysis of a Free and Polymer-Conjugated Multi-Enzyme System for Ethanol Metabolism,
Designing Gels with Memory for Drug Delivery: Manipulating Transport and Binding Properties by Altering Structural and Reaction Parameters