Tailoring Structure, Thermodynamics, and Rheology in Surfactant-Colloid Mixtures for Soft Material Design,
Microstructure Measurements of Concentrated, near Hard Sphere Colloidal Dispersions Via 1-2 Plane Flow-SANS,
Solvent Isotope Effects On the Equilibrium and Shear Induced Isotropic to Nematic Transition in Wormlike Micellar Solutions,
Modeling Colloidal Interactions Mediated by Adsorbing Wormlike Micelles,
Adsorption and Phase Behavior of PEO and PVP On Cationic Nanoparticles in the Protein Limit,
Directed Self-Assembly of Colloidal Crystals with Electric Fields,
Surfactant Self-Assembly in Ionic Liquids
Investigation of Interfacial Rheology & Foam Stability,
Effect of Low-Reynolds Number Flow On Surfactant Transport to a Stationary Spherical Cap: Experiments and Theory,
Shear Alignment of Neat and Nanoparticle Loaded Block Copolymer Hydrogels,
The Role of Diffusion in Dynamic Interfacial Tension Data: The Transition From Diffusion-Limited to Kinetic-Limited Dynamic,
Low Concentration Dynamic Surface Tension Measurements of Macromolecular Systems,
The Role of Surfactant Mass Transport in the Formation of Microscale Droplets
Temperature and pH Response of a Series of Amino Methacrylate Polymer Brushes by In-Situ Spectroscopic Ellipsometry Measurements,
Synthesis, Characterization, and Swelling/Contraction Behavior of PNIPAm and PMAA Polymer Brushes Grafted On Gold Substrates,
pH-Dependent Hydrolytic Degradation of Poly(trimethylene malonate) and Poly(trimethylene itaconate),
Liquid Phase Serial Filtration of Pine and Cottonwood Pyrolysis Oils and Observed Effects On Aging,
Transport Modeling of Micro- and Nanometer-Sized Particles in a Human Lung Geometry
Flow Structure Simulation for a Novel Coal Feeding System of a High-Density Downer Reactor,
Simulation of Electrospray Particle Deposition Process in Pharmaceutical Micro-Patterning,
Application of Auxiliary Electric Field in Electrohydrodynamic Atomization Encapsulation Chamber to Enhance Particle Collection Efficiency,
Effect of Fabrication Conditions On the Formation of Double-Walled Microspheres and Microfibers by Coaxial Electrospraying/Electrospinning Technique,
Gelation of Superparamagnetic Nanoparticles: Experimental and Computational Studies,
Application of DNA Vector-Based RNA Interference (RNAi) Technology in Controlled Release Gene/Drug Delivery Systems for Synergetic Therapy of Malignant Glioma,
Combined Modality Doxorubicin-Based Chemotherapy and Chitosan-Mediated p53 Gene Therapy Using Double-Walled Microspheres for Cancer Treatment,
Hydrodynamic Behaviors of a Large-Scale Triple-Bed Circulating Fluidized System with High Solids Fluxes,
Functionalized Nanoparticles with Enhanced Blood-Brain Barrier Penetration
An Evaluation of Production of Fuels From Sewage Sludge,
Experimental Studies and Reaction Kinetics of Lipid Synthesis From Lipomyces Starkeyi,
Optimization of Medium by Response Surface Methodology for Reducing Ethanol Production Cost,
Economic Evaluation of Lipid Production From Sweet Potato Waste,
Impact of Nutrients On the Cost of Lipid Production by the Oleaginous Yeast,
Cost of Butanol Separation From ABE Broth,
Methanol Production From Syngas – An Aspen Plus Simulation and Modeling,
An Economic Evaluation of Lipid Production by Cultivation of Algae – A Critical Path Analysis
Positron Annihilation Spectroscopy and Molecular Dynamics Study of the Membrane Formation Mechanism of Different Cellulose Derivatives Via Phase Inversion,
Molecular Understanding of Cellulose Acetate Membrane Formation Processes for the Minimization of Internal Concentration Polarization in Forward Osmosis,
Investigations of Using Highly Water-Soluble Magnetic Nanoparticles as Novel Draw Solutes in Forward Osmosis
Model-Based Design of Reversed-Phase Chromatography for the Purification of Lispro Human Proinsulin Crude with Unknown Impurities,
IR Spectroscopy and Molecular Simulation Studies of Interactions of a Polymeric Sorbent with Chiral Enantiomers,
Applications of Rate Model Simulations in the Design of Ion Exchange Process
Correlation Between Sensitivity and Morphology of Flame-Made SnO2 Thin Film Gas Sensors,
CO2 Photoreduction by Nanostructured Composite Photocatalytic Materials Synthesized by a Furnace Aerosol Reactor System,
Laboratory-Scale Study of Fine Particle Formation and Mercury Speciation During Oxy-Coal Combustion
Nanocatalysis for Aqueous Processing of Biomass Derived Feedstocks,
A Simple Method for Preparing Metal Nanoparticles Inside Multi-Walled Carbon Nanotubes and Their Transmission Electron Microscopy Image Analysis,
A Simple and Scalable Catalyst for CVD Synthesis of Single-Walled Carbon Nanotubes (SWNTs),
Active Species in Single-Walled Carbon Nanotube (SWNT) Synthesis From Silica-Supported Cobalt Catalysts,
Aqueous Phase Reforming Over Carbon Nanotube Supported Catalysts
The Study and Comparison of the Uptaking and Intracellular Trafficking of Lipoplex Nanoparticles and Polyplex Nanoparticles by Quantum Dots-FRET,
Nano-Electroporation (NEP) for Precise Drug/Gene Delivery,
Tethered Bilayer Lipid Membranes with Pre-Designed Nanopores for DNA-Membrane Interaction Analysis,
Novel Cationic Lipids for Efficient siRNA Delivery to Liver Cancer,
Generation of Induced Pluripotent Stem (iPS) Cells: Viral Vs. Non-Viral Methods
Conductive Core-Sheath Nanocables Based Gas Sensors,
Meso-Tritolylcorrole/Single Walled Carbon Nanotubes Donor-Acceptor Heterojunction and Its Application in Ultra-Sensitive NO2 Detection,
Non-Enzymatic Glucose Sensing Using Novel Metal Oxide-Metal Composite Nanofibers,
Direct Electrochemistry and Electrocatalysis of Electrospun Single-Walled Carbon Nanotubes-Hemoglobin Composite Microbelts – towards the Development of Sensitive and Mediator-Free Biosensor
A Novel Artificial Antibody for Reversible Cell Recognition,
Aptamer-Decorated Hydrogels for Sustained Protein Release,
Pulsatile Growth Factor Release From Novel Aptamer-Functionalized Composites,
Synthesis of Folate Functionalized Biodegradable Amphiphilic Dendrimer-Like Star Polymer for Targeted Cancer Cells
Nanoparticle Vaccines for Biodefense Pathogens,
Award Submission: Targeting Dendritic Cells with Functionalized Polyanhydride Nanoparticles,
Novel Polyanhydride Nanoparticles Adjuvants: Dendritic Cell Uptake and Activation,
Encapsulation of Model Antigens Into Microparticles Results in Dosage Sparing Capabilities,
Encapsulation Into Amphiphilic Polyanhydride Microparticles Stabilizes Yersinia Pestis Antigens,
Targeting Dendritic Cells with Functionalized Polyanhydride Nanoparticles,
Polyanhydride Nanoparticle Adjuvants: Implications for a Single Dose Anthrax Vaccine
Plantwide Design and Control of Biodiesel Production Processes Via Two-Step Syntheses or by Simultaneous Esterification/Transesterification,
A Simpler Method for Developing Batch Crystallization Recipes,
Effect of Relative Volatility Ranking On the Design and Operation of Batch Reactive Distillation Systems,
Design and Control of Glycerol Tertiary Butyl Ethers Process for the Utilization of Renewable Resource
Discrete Element Modeling of Bi-Convex Tablet Shaped Particles - Contact Detection Algorithms and Validation,
Compaction of Binary Particle Mixtures Using the Multi-Particle Finite Element Method (MPFEM),
Modeling Inter-Particle Coating Variability in a Rotating Drum Using the Model of Khakhar Et Al. (1996),
Intra-Particle Coating Variation: Analysis and DEM Simulation,
Modeling a Continuous Granular Mixer: Periodic Slice DEM Models Vs. Full Blender DEM Simulations,
Modeling the Roll Compaction Process Using Finite Element Analysis,
The Simulation of Spray Coating Process Using Compartmental Based Population Balance Model,
Classifying the Fluidization and Segregation Behavior of Binary Mixtures Using Particle Size and Density Ratios,
Comparison of Various Models for Dilute Turbulent Gas-Particle Flow with Inelastic Collisions and Turbulence Modulation
Synthesis and Characterization of Poly(antioxidant β-amino esters) for the Modulation of Cellular Oxidative Stress,
Endothelial Targeting of Antioxidant Polymer Nanoparticles for the Suppression of Vascular Oxidative Stress,
Antioxidant Enzyme Loading On Mesoporous Silica to Facilitate Application of Engineered Silica in Therapeutic Drug Delivery
Application of the REA (reaction engineering approach) to Model Convective Drying of Various Type and Size of Food Materials and Cyclic or Intermittent Drying of Food Materials,
Engineered Gas Adsorbents, Optimum Structure and Performance,
Preparation of Microporous Carbons Using Metal-Organic Frameworks (MOFs) as a Template
Epoxy Resin Nanocomposites Reinforced with in-Situ Stabilized Carbon Nanofibers (CNFs),
Conductive Polymer Metacomposites with Sphere- and Rod- Like Nano-WO3,
Ex-Situ Fabrication of Conductive and Magnetic Nanocomposites: Carbon Nanofibers and Fe@FeO Nanoparticles Reinforced Polypropylene,
Enhanced Electrical Switching and Electrochromic Properties of Poly(p-phenylenebenzobisthiazole) Thin Films Embedded with Nano-WO3,
Magnetic Epoxy Nanocomposites Reinforced with Core-Shell Structured Fe@FeO Nanoparticles,
Multifunctional Polymer Nanocomposites for Electronic Device Applications,
Electrospun Magnetic Polymer Nanocomposite Fibers
A Novel Brush Feeder for the Pneumatic Delivery of Small Particles at Steady Feed Rates,
Modeling of a Solar Thermal Reactor for Control Purposes,
Discrete Particle Simulations of Micro-Jet Assisted Fluidization of Nanoparticulate Agglomerates,
Rapid Solar-Thermal Gasification of Biomass – Laboratory Curiosity to Development Facility,
Simplified Dynamic Model of a Solar Thermal Reactor for Biomass Gasification
Synthesis of Metal Nanoparticles Via Cryogenic Milling and in Situ Atomic Layer Deposition for Passivation,
The Platinum Atomic Layer Deposition On TiO2 and Its Effect On Photoactivity,
Atomic Layer Deposition of Nanoscale Metal Oxide Layers On TiO2 Nanoparticles Using a Micro-Jet Assisted Fluidized Bed Reactor
Spatiotemporal Signaling During Cell Adhesion and Migration: Computational Models and Experimental Analysis,
Spatiotemporal Analysis of Signaling and Motility During Fibroblast Migration: Mechanisms and Models of Directional Persistence,
Stochastic Models Integrating Adhesion and Intracellular Signaling Dynamics Affecting Membrane Protrusion in Migrating Cells
A Comparison of Particle Size Distribution, Composition, and Combustion Efficiency as a Function of Coal Composition,
Effects of Oxygen Concentration and Coal Composition On Aerosol Chemistry in Oxy Firing,
Ash Formation and Deposition During Oxy-Coal Combustion,
Development of a Bench-Scale Oxy-Fuel Combustion System for the Study of Pollutant Behavior,
Experimental Studies of Ignition in 40kW Co-Axial Turbulent Diffusion Oxy-Coal Jet Flames
Dual Enzyme Biosensor for Detection of Organophosphorus Compounds Using Organophosphorus Hydrolase and Horseradish Peroxidase,
Quartz Crystal Balance (QCM) and Electrochemical Impedance Detection of the Protein Biomarker Troponin I Using Peptides Obtained From the Biopanning of a Phage-Display Library
Computational Mechanism Development for Hypergolic Propellant Systems: MMH and DMAZ,
Introduction and Session Objectives,
Open Discussion On High Performance Computing in Chemical Engineering,
Mechanism Development for Hypergolic Propellant Systems: MMH and DMAZ,
Analysis of Chain Scission in Polymers Using Reactive Molecular Dynamics,
Federal Agency View of Simulation Based Engineering and Science,
Facilitated Discussion On AIChE Institute Roles In Simulation Based Engineering and Science,
Comparison of Fuel Rich and Stoichiometric Premixed Toluene Flames
Production of Carboxylic Acids From Acidogenic Fermentation of Algefiber® (Sea Weed Sludge) Using a Mixed Culture of Marine Microorganisms,
Kinetics and Mechanism for Acetone Hydrogenation by Ru/Carbon,
Exploring Three Pathways to Convert a Hemi-Cellulose Rich Pre-Pulping Extract Into Long-Chain Alcohols Via the MixAlco™ Process,
University of Maine's Chemical and Biological Engineering Program Assessment Process,
Thermal Deoxygenation of Levulinic Acid
Continuously Tunable Dye Laser Using Dissolving Drops in Microchannels,
Measurements of the Rate of Solid Nucleation in Drops of Supercooled Water and Hexadecane Using a High-Throughput Microfluidic Apparatus,
A New Principle for the Direct Application of Force to a Flame,
Control of Flame Instabilities Via Oscillating Electric Fields,
Hydrodynamic Positioning of Buoyant Drops and Bubbles Inside Microfluidic Channels,
The Control and Extinction of Hydrocarbon Flames Via Electric Fields,
Ion Transfer Properties of Layer-by-Layer Films During Contact Electrification
Characterization of a Volatile Gas Plume in Bubbling Fluidized Bed Biomass Gasifier with Single Point Asymmetric Fuel Injection,
Experience with a Pressurized Fluidized Bed Biomass/Black Liquor Gasifier,
Commissioning of a 500 KW Pressurized Entrained-Flow Coal Gasifier,
Copper as An Oxygen Carrier in a Chemical Looping Combustion System: Reaction Kinetics and Fluidized Bed Performance,
Characterization of a 200 Kw Fluidized Bed Biomass Gasifier,
Pyrolysis and Gasification Reactivity of Coal and Petcoke Under High Pressure Conditions,
Sulfuric Compounds From Biomass in a Fluidized Bed Gasifier
The Effects of Solvents On Glucose to HMF Conversion,
Responsive Membranes for Water Treatment,
Protein Fouling During Normal Flow Microfiltration,
Modification and Characterization of Regenerated Cellulose Ultrafiltration Membranes for Treatment of Produced Water,
Ph Responsive Membraens for Water Treatment,
Combined Theoretical and Experimental Investigation On Extraction of Carboxylic Acids, Furfural and HMF From Biomass Hydrolysates,
The Effects of Salt On LCST of Pnipam
Performance Enhancement of Low Temperature Water Gas Shift Catalysts by Palladium-Iron and Platinum-Iron Interactions,
Determination of the Active Site for Nanoparticle Gold Water-Gas Shift Catalysts Using a Model Support,
Kinetic Studies On Au and Pt Catalysts Supported On Model Al2O3 and TiO2 for the WGS Reaction
DFT Studies of Coverage Dependent Dipole-Dipole Interactions and Effect of Uniform Electric Field On Chemisorption of CO and NO On Pt(111),
Thermodynamic Analysis and Experimental Results of Fe-Ni-Cu Metal Nanoparticles Preparation by Solution Combustion Synthesis for Catalytic Hydrogen Production,
Oxidative Reforming of Ethanol for Hydrogen Production On Fe/Ni/Cu Multicomponent Catalysts,
Impregnated Layer Combustion Synthesis: a Novel Methodology to Prepare Multi-Component Catalysts, Fundamentals and Experiments,
Theoretical Simulation and Experimental Results On Multilayer Enhanced Infrared Reflection Absorption Spectroscopy (MEIRAS); a Novel In-Situ Technique to Study CO Adsorption and Oxidation On Thin Film Model Pt Catalysts,
CO Chemisorption IR Studies On Supported Nanofabricated Pt/TiO2 Catalytic Junctions
Spontaneous Emulsification of Octane/AOT/Brine Systems to Form Nanoemulsions,
Engineering Nanocatalysts to Clean Contaminated Water,
Microfluidic Formation of Polyamine Gels and Capsules by Crosslinking and Flow Focusing Approaches,
Self- Assembly and Nanotechnology: Real-Time, Hands- On, and Safe Experiments for K-12 Students,
Nanopolyplexes - Responsive Multipurpose Delivery Vehicles
Design of Novel Artificial Allosteric Proteins and Their Applications,
Modulating the Sensitivity of a Bacterial Biosensor for Peroxisome Proliferator-Activated Receptors Gamma to the Ligands by Engineering Spacer Linker,
Probing Into the Mechanism for Bacterial Biosensor for Nuclear Receptor Ligand
Listening to New Signals with Old Ears: Sensing and Recognition of the Quorum Sensing Signal AI-2 by the Tsr Chemoreceptor,
The Role of Toxin/Antitoxin Systems in the General Stress Response, Biofilm Formation, and Persister Cell Formation,
Exhaustive Screening of 3985 Isogenic Escherichia Coli Mutants for Enhanced Bacterial Hydrogen Production
Implementation of Novel Integrated Pharmaceutical Processes: A Model-Based Approach,
Application of a Synthesis and Design Methodology Incorporating Process Intensification,
Systematic Framework for Design and Adaption of “Fast, Flexible, Continuous Modular Plants”,
An Ontological Knowledge-Based System for Identification of Efficient Chemical Production Routes,
Recent Advances in Reactive Distillation,
Process Development and Design for Greener Pharmaceutical Processes
A Model Reduction Approach to Activated Sludge Systems,
A New Approach to Model Identification In E. Coli Fed-Batch Fermentations,
MOSAIC: A Web-Based Modeling Environment for Process Systems Engineering,
An Alternative Process for Oxidative Methane Coupling for Ethylene, Electricity and Formaldehyde Production,
Methane Oxidative Coupling: Synthesis of Membrane Reactor Networks
Quality-by-Design (QbD): Integration of Real-Time PAT Process Monitoring and off-Line Product Characterization to Explore the Linkage Between a Pharmaceutical Process and Product,
Quality-by-Design (QbD) Round Table Discussion,
Quality-by-Design (QbD): Integration of Design of Experiments (DOE) and Real-Time PAT Monitoring for Pharmaceutical Powder Blending Process Evaluation
Exploring Bistable Molecular Switches and Their Functional Roles Using a Meta-Analysis That Integrates Expression Data with Regulatory Networks,
A Discrete Modeling Approach to Identify the Signaling Pathways That Leads to the Induction of Activating Transcription Factor 4 (ATF4) and cAMP Responsive Element Binding Protein (CREB) by Palmitate in HepG2 Cells
Magnetic Filed-Assisted Synthesis of Fe3O4/Chitosan Nanocomposites by Co-Precipitation Method,
Studies of Fe3O4-Chitosan Nanoparticles Prepared by Co-Precipitation Under the Magnetic Field for Lipase Immobilization,
Synergistic Effects of Anionic Surfactant and 0.30 T Static Magnetic Field On the Activity and Structure of Catalase
Synthesis of Multifunctional Nanoparticles for Cancer Imaging, Diagnostics and Therapy,
The Study and Comparison of the Uptaking and Intracellular Trafficking of Lipoplex Nanoparticles and Polyplex Nanoparticles by Quantum Dots-FRET,
Measurement and Control of the Size Distribution of Electrospray Generated Liposomes for Gene Delivery,
Real Time Detection and Imaging of mRNA/Proteins in Individual Cells by Nanoelectroporation (NEP),
Generation of Induced Pluripotent Stem (iPS) Cells: Viral Vs. Non-Viral Methods,
Synthesis of Multifunctional Lipoplex Nanoparticles by Micromixer-Electrospraying for Cancer Imaging, Diagnostics and Therapy
Comparison of One and Two Step Methods for Producing Jet Fuel Building Blocks From Cellulosic Biomass: Hemicellulose Release and Levulinic Acid Production From Maple Wood,
Improving Simultaneous Saccharification and Co-Fermentation (SSCF) Performance by Optimizing Biomass and Enzyme Feeding Strategies,
Application of An Integrated High Throughput Pretreatment and Enzymatic Hydrolysis (HTPH) Screening Tool to Investigate Radial Variation in Populus,
Aqueous Processing of Cellulosic Biomass to Reactive Intermediates for Biological and Catalytic Conversion to Liquid Fuels and Other Products,
Modeling for Identification of Operating Strategies for Continuous Simultaneous Saccharification and Fermentation (cSSF),
Chemical Transformations of Poplar Lignin During Dilute Acid Pretreatment
![[ Visit Client Website ]](images/banner.gif)