![[ Visit Client Website ]](images/banner.gif)
CFD Approach for the Design of Microcapsules Based On the Formation of Drops Using Viscous Non-Newtonian Fluids Through Fan Jet Nozzles,
CFD Approach for the Analysis of NON-Newtonian Polymeric Microparticles Production,
Development and Characterization of A Microcapsules Production Technology, Based On the Formation of Drops From Viscous Liquids Trough Fan Jet Nozzles,
Development of an Adsorption Model to Evaluate the Efficiency On Multiple Adsorption-Elution Cycles of Monolith-Supported IMAC Chromatography,
Development of Two Steps Tissue Allograft with Sequential Growth Factor Delivery to Promote Revascularization in Denudated Pneumonectomy Bronchial Stump,
Development of a Group Contribution Method to Predict Sublimation Enthalpies of Solids Constituted by Aromatic and/or Polycyclic Aliphatic Rings. Application for Solid-Vapour Equilibria
High-Pressure Vapor-Liquid Equilibria for the Carbon Dioxide – Heptane – Dodecane,
Thermodynamic Derived Properties for Carbon Dioxide - Ethanol - Decane Mixtures At High Pressures,
Density Measurements of Tetrahydrofuran + Water Solutions At Atmospheric Pressure,
CO2 + H2O + 1-Propanol Semiclathrate Hydrate Phase Equilibrium,
Vapor–Liquid Equilibrium for the Binary System Limonene + Propane,
A New Equipment for Hydrate Formation: Measurements of Hydrate Phase Equilibria for Nitrogen + Water,
Volumetric Properties for the Carbon Dioxide + Heptane + Dodecane,
Compressed Liquid Densities for Carminic Acid + Ethanol in the Temperature Range of (313 to 363) K,
A Modified Capillary Viscometer: Dynamic Viscosity Measurements for Heptane up to 30 Mpa and 353 K,
Experimental Solubility Data of Boldine in Supercritical Carbon Dioxide Using Ethanol As a Co Solvent,
Hydrate Phase Equilibria of Clathrate Hydrates of Carbon Dioxide + Propane
Modelling the Fluid Phase Behaviour of Aqueous Mixtures of Multifunctional Alkanolamines and Carbon Dioxide Using Transferable Parameters with the SAFT Approach,
Ab-Initio and Computer-Aided Molecular Design for the Identification of Optimal Solvents for Reactions,
Gsaft: Application of the SAFT-γ Mie Group Contribution EoS in the Oil/Gas Industry - From Academic Research to Industrial Deployment
SAFT-γ Coarse Grained Models for the Molecular Simulation of Complex Fluids with a Top-Down Methodology,
Application of the SAFT-VR Density Functional Theory to the Prediction of Interfacial Properties of Mixtures of Relevance to Reservoir Engineering,
Validation of a Process Model of CO2 Capture in an Aqueous Solvent, Using an Implicit Molecular Based Treatment of the Reactions
Synthesis of Highly Concentrated Gold Nanoparticles: A Perspective for Industrial Batch Production Processes Based On Green Chemistry,
Physiologically Based Pharmacokinetic and Pharmacodynamic Approach to Nanoparticle Biodistribution and Tumor Uptake: A Comparison Between Gold Nanoparticles and Spions Nanoparticles,
Physiologically Based Three-Compartment Model for Anomalous Diffusion of Gold Nanoparticles with a Pulsed Inlet,
Dynamic Treatment Strategies for Methanol Intoxication Using Ethanol As Alcohol Dehydrogenase Inhibitor in Human Beings,
Morphological and Surface Dependant Nano-Particle Behavior for Medical Imaging: Evaluation of Magnetic Nanoparticles for MRI and Gold Nanoparticles for CT-SCAN
Process Synthesis, Design and Intensification. an Integrated Approach,
Group Contribution+ (GC+) Based Estimation of Environment-Related Properties for Design of Sustainable Processes: Development of Property Models and Uncertainty Analysis,
Solventpro – the Solvent Selection and Design Framework,
Design of an Emulsified Hand Wash Through a Systematic Model-Based Methodology,
A Systematic Approach for Optimized Water Allocation Through Solution of Large Scale Water/Wastewater Networks Problems,
Crystallization Kinetics Identification within a Generic Modeling Framework,
Process Intensification of the Production of Di-Methyl Carbonate (DMC) Using a New Synthesis and Design Process Intensification Methodology,
Production of Dialkly Carbonates Via Reactive-Extractive and Pressure-Swing Distillations Using Unifac-CI VLE Model Predictions,
Carbon Dioxide Capture Processes: Sensitivity Analysis for Optimization and Control,
Process Intensification by Membrane-Assisted Reactive Separation Processes: A Design Tool Based On Process Analysis and Optimization,
Adaptive Continuous Template Based Novel Manufacturing Technique for Faster Manufacturing of New APIs for Clinical Trials,
A Systematic Framework for Synthesis and Design of Multi-Scale Processing Networks Using Incremental-Based Solution Strategy,
Synthesis and Design of Processing Networks: Decision Making Under Uncertainty,
An Integrated Methodology for Design of Tailor-Made Blended Products: Biofuels and Bio-Based Lubricants,
Simultaneous Design of Ionic Liquids and CO2 Recovery Processes
Adsorption of Lead From Aqueous Solutions by Cotton Fabrics Modified with Citric Acid,
Looking for Optimal Conditions to Manufacture Activated Carbon From Barley Husk by Single- or Dual-Optimization,
Anchoring of Iron Hydro(oxide) Particles On Activated Carbon for Removing Hexavalent Chromium From Aqueous Solutions
Modeling the Dynamics of the Film Coating Operation for Pharmaceutical Tablets,
Modeling and Simulation of a Wurster Column for Particulate Coating Using Population Balance Moldels and Thermodynamics,
Inversion of Latent Variable Regression Models to Support Product and Process Development,
Modeling and Simulation: Historical Parallels Between the Pharmaceutical and Petrochemical Sectors
Evaluating the Potentials of Paper Mill Sludge (PMS) As Feedstock for Biofuels Production,
Characterization and Fast Pyrolysis Study of Phragmites Australis to Evaluate Its Potential As Feedstock for Biofuels Production,
Effects of Hydrolysis and Torrefaction On Pyrolysis Product Distribution of Spent Mushroom Compost (SMC)
Award Submission: A Novel Anionic Nanoparticle Delivery System for Microrna-29b Targets FLT3 and KIT Receptor Tyrosine Kinase Expression in Acute Myeloid Leukemia,
A Novel Anionic Nanoparticle Delivery System for Microrna-29b Targets FLT3 and KIT Receptor Tyrosine Kinase Expression in Acute Myeloid Leukemia
Generalized Non-Linear QSPR Models for Surface Tension,
A New Volume Translated Peng-Robinson Equation of State for Saturated and Single-Phase Liquid Densities,
In Silico Prediction of Cancer Mechanism of Action,
Process Simulation of a Bi-Phasic Reaction: Hydrogenation of p-Hydroxybenzaldehyde,
A Theory-Framed Quantitative Structure-Property Relationship (QSPR) Model for Liquid-Liquid Equilibrium,
Modeling Gas Adsorption-Induced Swelling of Coals,
Measurements and Modeling of in-Situ Gas Densities and Adsorption Isotherms for CO2 On Wet Coals
Tailoring Catalyst Selectivity for 1,3-Butadiene Hydrogenation: Effects of Metal Nuclearity and Ligands,
Supported Molecular Catalysts: Characterization of the Metal and Metal-Support Interface Structures by Atomic-Resolution Transmission Electron Microscopy and Spectroscopy,
Selective Hydrodeoxygenation of Guaiacol Catalyzed by Pt/MgO
Assessment of BIO-Ethanol Dehydration Process Alternatives by Process Modeling and Life-Cycle Analysis,
Alternatives for Anhydrous Ethanol Production an Economic and Environmental Approach,
Calorimetric Methods and Mathematical Modeling for the Characterization of Chemical Vapor Deposition Processes,
Application of Differential Scanning Calorimetry and Mathematical Modeling for the Development of ESTER Phosphate Coatings,
CFD Modeling and Design of a Gravity Settler for Algae Harvesting,
Analysis of Alternative Processes for Anhydrous Ethanol Production, an Economic and Environmental Approach,
CFD Modeling and Design of a Gravity Settler for Algae Dewatering
Optimal Design of County-Level Hydrocarbon Biorefinery Supply Chains Under Uncertainty: A Case Study for the State of Illinois Using Spatially-Explicit Model,
Process Design and Optimization for Hydrocarbon Biofuel Production From Corn Stover Via Gasification,
Optimal Design of Hydrocarbon Biorefinery Via Gasification Pathway: Multiobjective Optimization Coupled with Life Cycle Assessment,
Multiobjective Stochastic Programming Models and Algorithms for Robust Design and Optimization of Biofuels Supply Chains
Structure/Property Relationships in Polymer Membranes for Water Purification and Power Generation,
Salt Transport Structure/Property Relationships and Modeling in Polymer Membranes for Water Purification and Power Generation,
Diffusive Water Transport: Relating Hydraulic Permeability to the Apparent Water Diffusion Coefficient in Water-Swollen Polymers,
Characterization of Aluminum-Neutralized Sulfonated Styrenic Pentablock Copolymer Films,
Effect of Mixed Monovalent and Divalent Ion Feeds On Sulfonated Polysulfone Desalination Membrane Performance
Introduction to Gary Powers,
High-Throughput Characterization of the H2-D2 Exchange Activity of PdxCu1-X Alloys,
Sulfur Resistant Pd-Ag-Au Alloys for Hydrogen Separation,
Enantioselective Separation of Aspartic Acid On Naturally Chiral Cu (3 1 17)R&S Surfaces,
Autocatalytic Decomposition Mechanism of Aspartic Acid On Cu(110) Surfaces,
Structure Sensitivity of Oxygen Adsorption On Surface Structure Spread Single Crystals
Operational Planning in Residential Microcogeneration Energy Production Networks,
Individualized Physiologically Based Modeling and Model Predictive Control of Volatile Anesthesia,
Modelling and Robust Model Predictive Control of Insulin Delivery in Type 1 DM,
A Decision Tool for the Design of Optimal Personalised Chemotherapy Protocols for the Treatment of Acute Myeloid Leukaemia (AML)
Reduction of a Mechanistic Drying Model of Pharmaceutical Granules for Inclusion in a Population Balance Model with Continuous Growth Term,
Crystallization Kinetics Identification within a Generic Modeling Framework,
Adaptive Continuous Template Based Novel Manufacturing Technique for Faster Manufacturing of New APIs for Clinical Trials,
An Integrated Methodology for Design of Tailor-Made Blended Products: Biofuels and Bio-Based Lubricants,
Application of Global Sensitivity Analysis As Preparatory Step for Reduction of a Drying Model of Pharmaceutical Granules
A DFT+U Investigation of Propene Oxidation Over Bismuth Molybdate,
XPS and in-Situ SERS Investigations of Metal Boride Nanoparticles for the Oxygen Evolution Reaction,
The Kinetics and Model of Selective Oxidation of Propylene On Bismuth Vanadium Molybdenum Oxide Catalysts,
Tuning Reducibility for Improved Catalytic Performance in Bismuth Molybdovanadate Catalysts
Screening Wood-Decay Fungi for Demethylation of Kraft Lignin Using Two Novel Assays with Applications in Producing Bio-Methanol and Formaldehyde-Based Polymers,
Biological and Enzymatic Demethylation of Kraft Lignin and Lignin-Like Model Compounds by Boreal Forest Fungi Using a Novel Technique: Selected Ion Flow Tube-Mass Spectrometry (SIFT-MS)
Multiscale Anode Assemblies for Improving Efficiency and Versatility of Dye-Sensitized Solar Cells,
Equilibrium and Non-Equilibrium Dynamics and Structure of Soft Sphere Fluids,
Measurement of Density Fluctuations in a Vertically Oscillated Granular Bed At the Onset of Vibrofluidization,
Direct Measurement of Suspension Microstructure: Effects of Combined Hydrodynamic Electrostatic, and Viscoelastic Interactions
Liquid Fuels From Alternative Carbon Sources Minimizing Carbon Dioxide Emissions,
Numerical Parametric Investigation of Breakage in a Ball Mill,
Determination of Residence Time Distribution in Rotary Calciner,
Effects of Support Shape and Size On the Metal Distribution of Supported Catalysts,
Effects of Particle Size and Particle Size Distribution On Fluidized Bed Drying of Pharmaceutical Materials,
Simulation of the Breakage of Bonded Agglomerates in a Ball Mill,
Impact of Drying Approaches On the Metal Distribution of Preparation of Supported Catalysts
Fischer-Tropsch Synthesis Using H2/CO/CO2 Syngas Mixtures: A Comparison of Product Distribution for Iron and Cobalt Based Catalysts,
Experimental Investigation and Simulation On the Phase of the Product Water in Low Temperature Fischer-Tropsch Synthesis,
Liquid Fuels From Alternative Carbon Sources Minimizing Carbon Dioxide Emissions,
Practical Application of Column Profile Maps: Distributed Feed Crude Distillation Column,
Aspen Simulation of Mobile Biomass to Liquid Facility – the Beauti-Fuel Concept,
Effect of Substrate and Temperature On Biogas Production From Anaerobic Digestion,
Energy-Efficient Bio-Ethanol Recovery
Design of Functional, Patternable Vapor-Deposited Polymer Thin Films,
Polymer-Free near-Infrared Photovoltaic with Single Chirality (6,5) Semiconducting Carbon Nanotube Active Layer,
Patterning Polymer and Metal Microstructures On Curved Substrates Via Initiated Chemical Vapor Deposition (iCVD),
Stop Flow Lithography: Beyond PDMS Microfluidic Devices,
Systematic Tuning of Cross-Linking in Vapor-Deposited Polymer Thin Films
The Role of Mucous Viscosity and Esophageal Strictures On Bolus Flow in Diseased Esophagi,
Imaging Echogenic Microparticles in the Gastrointestinal Tract: Demonstration of a New Class of Ultrasound Contrast Agents for Noninvasive Diagnosis of Eosinophil Esophagitis,
Synthesis and Characterization of Biomimetic Echogenic Microparticles for Use As Ultrasound Contrast Agents
High Titer Ethanol Production From SPORL Pretreated Lodgepole Pine by Simultaneous Enzymatic Saccharification and Combined Fermentation (SSCombF) of Enzymatic and Pretreatment Hydrolysates,
Fractionation of Forest Residues of Douglas-Fir for Fermentable Sugar Production by SPORL Pretreatment,
Quantitative Predictions of Bioconversion of Aspen by Dilute Acid and SPORL Pretreatments Using a Unified Combined Hydrolysis Factor (CHF)
Comparison of Estrogenic Properties of Small Molecules Across Several Species Using Biosensors,
High-Throughput Screening System for the Determination of Estrogenic Properties of Small Molecules,
A Comparison of Estrogenic Properties of Small Molecules Across Several Species Using Biosensors,
High-Throughput Screening System for the Determination of Estrogenic Properties of Iccvam-Recommended Compounds
Monte Carlo On Gpus; A Proof of Detailed Balance,
New Directions for Entropic Forces in Hard Particle Fluids,
Magnetic Janus Particles: Preparation, Self-Assembly, Simulation, and Application,
Packings and Self-Assembly of a Family of Hard Truncated Triangular Bipyramids,
Toward Tailored Elasticity of Particulate Soft Matter by Control of Structural Rigidity
Control of Oxygen Permeability of Polyethylene Terephthalate Films by Supramolecular Assembly of Charged Carbon Nanostructures,
Dynamic Encapsulation of Hydrophilic Nanomaterials in Hydrophobic Polymer-Based Particles by Simple Emulsion Technique,
Amperometric Detection and Quantification of Perchlorate in Groundwater Supplies Using a Highly Sensitive Nanostructured Electropolymerized PEDOT Biosensor
Analysis of the Influence of Heat Flows in Optimal Design and Operation of Multicomponent Distillation Columns: Extractive Distillation Case Study,
Optimal Design and Control of Batch Distillation Columns,
Derivation of the Optimal Control of an Extractive Distillation Unit in the Production Process of Fuel Grade Ethanol
Immobilization of Lipase B From Candida Antarctica B On Poly (methyl methacrylate) Epoxylated Support Aiming Biodiesel Production,
Bacterial Biosurfactant Production From Biomass-Derived Sugars Aiming Bioremediation of Marine Ecosystems Contaminated by Hydrocarbons,
Surfactant Improved Fatty Acids Production From Babassu Oil Using Rizomuchor Miehei Lipase
Analysis of the Effects of Varying Carbon Dioxide Concentration in the Biomass Production and Metabolic Network of the Microalgae Chlamydomonas Reinhardtii,
Rational Platform for Biosurfactants Design Based On Molecular Dynamics and Experimental Validation Using Escherichia Coli Outer Membrane Protein A,
Exploring the Relationship Between Helicobacter Pylori's Caga Sequence and Affinity with Host's Receptors: A Proposal for Molecular Diagnostic Tools,
Evaluation of Transmembrane Proteins for Stabilizing Emulsions
Benchmarking of a New Absorption Mini-Plant,
Experimental Investigation and Model Validation of a Heterogeneously Catalyzed Reactive Distillation Process to Intensify the Synthesis of n-Butyl Acrylate From Acrylic Acid and n-Butanol,
Process Analysis and Generic Optimization of the Synthesis of n-Butyl Acrylate in an Industrial Scale Reactive Distillation Column
Experimental and Theoretical Process Analysis of Membrane-Assisted Reactive Distillation,
Optimization of Reactive Absorption Using an Evolutionary Algorithm,
Process Intensification by Membrane-Assisted Reactive Separation Processes: A Design Tool Based On Process Analysis and Optimization,
Liquid-Liquid Extraction of Alcohols From Aqueous Solutions Using Ionic Liquids
Nanostructured Particles of Manganese Oxide for ORR in Alkaline-Based Fuel Cells,
Investigation of Surface Oxidation State and Oxygen Evolution Activity of Manganese Oxide Nanoparticles,
In-Situ X-Ray Absorption Spectroscopy Investigation of a Bifunctional Manganese Oxide Catalyst with High Activities for the Oxygen Reduction and Evolution
Understanding Backbiting and Beta-Scission Reactions in Self-Initiated Polymerization of Methyl Acrylate: A Theoretical Study,
A Theoretical Study of Mechanisms for Chain Transfer to Monomer Reactions in Alkyl Acrylates,
Kinetics of Mechanisms of Chain Transfer to Polymer Reactions in Alkyl Acrylates: A Theoretical Study
Mechanism of Flow Induced Segregation in Blood and Other Multicomponent Suspensions,
Effect of Polymer Additives On Blood Flow in the Microcirculation: Simulations and Theory,
Nonlinear and Collective Dynamics in Microbial Locomotion: Bifurcations, Bundles and Biomixing,
Drift and Diffusion of Rigid and Flexible Fibers in Simple Shear Flow
Polyamine Based Antibacterial Gels for Wound Dressing Applications,
Three Dimensional Tumor Spheroids Through Cell-Instructive Polyamine Based Hydrogels,
Sensitizing Cancer Cells to TRAIL Mediated Cell Death by Mitoxantrone Loaded Theranostic Micelles,
Mechanistic Investigation of the TRAIL-Sensitization Activity of Mitoxantrone
Evaluation of a Pilot-Scale Facility for Biocrude Production by Activated Sludge Cultures Via Lignocelullose Sugar Fermentation and Downstream Recovery Processes,
Evaluation of Industrial Wastewaters As Fermentation Substrate for Biocrude Production by Enhanced Activated Sludge Cultures,
Volatile Fatty Acids As a Sole Carbon Source for Biocrude Production by Enhanced Activated Sludge Cultures
Multiphysics Approach to Developing a New Heavy Oil Upgrading Technology,
From Quantum Chemistry to Diesel Injector Deposits: Revisiting Liquid Phase Oxidation,
Multi-Physics Modeling of Auto-Thermal Diesel Surrogate Reforming,
Model Generation and Evaluation for the Oxidation of Ketones,
Investigation of Sorbents for Warm CO2 Capture by Pressure Swing Adsorption,
Product Identification and Mechanism Evaluation of Supercritical Water Desulfurization of Hexyl Sulfide,
Automated Reaction Network Generation for the Supercritical Water Desulfurization of Hexyl Sulfide,
New Pathways for Formation of Acids and Carbonyl Compounds in Low Temperature Oxidation,
Molecular Level Understanding of Super-Critical Water Desulfurization
Optimal Synthesis and Planning of Sustainable Chemical Processes,
Closing Remarks with Susan Powers,
Superstructure-Based Industrial Wastewater Treatment System Synthesis,
Optimal Simultaneous Production of Hydrogen and Liquid Fuels From Glycerol: Integrating the Use of Biodiesel Byproducts,
On the Derivation of Continuous-Time Scheduling Formulations From Generalized Disjunctive Programming,
Hybrid Bilevel-Lagrangean Decomposition Scheme for the Integration of Planning and Scheduling of a Network of Batch Plants,
Optimal Scheduling of Industrial Combined Heat and Power Plants Under Time-Sensitive Electricity Prices,
A Novel MILP Approach to the Synthesis of Thermally Coupled Distillation Sequences,
Simultaneous Optimization and Heat Integration for the Production of Algae Based Biodiesel Using Bioethanol,
Global Optimization of Bilinear Programs with a Multiparametric Disaggregation Technique,
Logic-Based Outer-Approximation Algorithm for Solving Discrete-Continuous Dynamic Optimization Problems,
An Algorithm for Preprocessing and Tightening Generalized Disjunctive Programming Models Through the Application of Basic Steps,
Feedstock Optimization and Scheduling of a Polymer Plant,
Offshore Oil and Gas Field Infrastructure Planning Under Complex Fiscal Rules and Endogenous Uncertainties,
Design of Supply Chains with Random Facility Disruptions,
Optimal Supply Chain Redesign in the Electric Motor Industry,
An Integrated Production and Distribution Model for the Optimal Operation of Industrial Gas Supply-Chains,
Simultaneous Production of Liquid Fuels and Hydrogen From Hybrid Feedstock: Switchgrass and Shale Gas,
Multiscale Strategic Planning Model for the Design of Integrated Ethanol and Gasoline Supply Chain,
Multi-Objective Optimization of a Biorefinery's Supply Network
Solution Combustion Synthesis of Nanostructured Cobalt Oxide for Sodium Borohydride Hydrolysis,
Dissipative Particle Dynamics Simulations of Nanopowder Dispersion for Applications in Solid Propellants,
Nanostructured Aluminum-Fluorocarbon Particles for Energetic Applications,
Combustion of Nanoscale Silicon with Polytetrafluoroethylene,
Water Processed Nanothermite Inks for Direct Deposition On Low Energy Initiators
Development of an Empirical Framework for Monitoring CSD Using FBRM in Batch Crystallization,
Optimization of a Carbon Dioxide-Assisted Nanoparticle Deposition Process Using Sequential Experimental Design with Adaptive Design Space,
Synthesis of CZTS Nanomaterials Via a Continuous Flow Supercritical Carbon Dioxide Process
Growth and Intumescent Flame Retartdant Behavior of Multilayer Thin Films Prepared From Completely Renewable Charged Polymers and Molecules,
Super Gas Barrier of All-Polymer Layer-by-Layer Assemblies,
Clay-Chitosan Nanobrick Walls: Renewable Multilayer Thin Films for Foil Replacement and Flame Suppression,
Ultrathin and Transparent Nanobrick Wall Super Gas Barrier Assemblies
Magnetic Epoxy-Magnetite Nanocomposites,
Looped Carbon Capturing and Environmental Remediation: Case Study of Magnetic Polypropylene Nanocomposites,
Magnetic Carbon Nanocomposites for Environmental Remediation,
Magnetic Polymer Nanocomposites for Environmental Remediation,
Magnetic Polyaniline Nanocomposites for Environmental Remediation
Utilizing Thermochemical Process Streams to Upgrade Bio-Char Into Value Added Activated Carbon Through Physical Activation,
Biochar Based Activated Carbon As Adsorbent to Recover Volatile Chemicals From Photobioreactor,
Synthesis of Biorenewable C/Si/SiO2 As the Li-Ion Battery Anode Material,
Coupling of a Photocatalysis Reactor with a Photobioreactor,
Soluble Inert Template for Preparing Nanostructured Carbon Materials From Forest and Plant Bioproducts
A New Interdisciplinary Engineering Course – “Nanoscale Transport Phenomena for Manufacturing Nanodevices”,
Synthesis and Applications of Low Melting Point Tin/Indium (Sn/In) Nanosolders,
Metal Oxide Nanowire Sensors and Sensor Arrays for Hazardous Gas Detection,
Novel Nickel Porous Nanoparticles and Their Application for the Electrochemical Detection of Serotonin,
Lead-Free Nanosolders and Their Application for Nanowire Assembly and Joining
Heat Transfer From Hot Particles to Cold Particles in Downward-Flow Binary Solids Systems,
Experimental and Numerical Investigations On the Electrostatics in the Downer Reactor,
Numerical Simulations and Experiments On Heat Transfer Around a Probe in the Downer Reactor of a Triple-Bed Combined Circulating Fluidized Bed
Transport Properties of Methane Confined in Nanoporous Carbons,
Solvation Structure of Ions in Model Disordered Carbon Electrodes,
Pressure Enhancement in Nanopores: Effect of Pore Shape,
Exploring Solid-Fluid Phase Behavior of Adsorbed Water Nanoconfined Between Mica and Graphene Surfaces,
Surface Chemistry of TiO2: Hydrophilic or Hydrophobic
Heat Integration in Coal Based Oxy-Combustion Power Plants,
Assessment and Analysis of Post-Combustion Carbon Capture with Membrane Separation Technology,
Innovative Cryogenic Air Separation Processes,
A New Approach to the Use of Exergy Analysis in Synthesis and Design - Focus On Low Temperature Processes
Cr and Ce Doped Fe/Ce Catalysts for High Temperature Water Gas Shift Reaction,
Flame Synthesized CaO Based Sorbents for CO2 Capture – Influence of Metal Ions As Dopants,
Direct Synthesis of Ethanol From Syn Gas Over Mesoporous Molecular Sieve Supported Rh Catalysts,
Mesocellular Phenol Formaldehyde Foams: Synthesis, Characterization and Lysozyme Adsorption Study
Rheological and Adhesive Properties of Poly(acrylic acid)/Clay Nanocomposite Hydrogels As Biocompatible Adhesive,
Synthesis and Characterization of Temperature-Responsive VO2/PNIPA Nanocomposite Hydrogels,
Microstructure of Magnetic Nanoparticles in Spherical Polyelectrolyte Brushes Observed by Small Angle X-Ray Scattering,
Preparation and Characterization of Thermochromic VO2/PNIPA Nanocomposite Hydrogels
Magnetic Epoxy Resin Nanocomposites Reinforced with Fe@C Nanoparticles,
Microwave Radiation Absorption Polyurethane Nanocomposites,
Magnetic Epoxy-Magnetite Nanocomposites,
Polypropylene/Carbon Nanotubes (CNT) Nanocomposites: The Role of Surfactant On Interfacial Compatibility,
Magnetoresistive Conductive Polyaniline - Barium Titanate Nanocomposites with Negative Permittivity,
Looped Carbon Capturing and Environmental Remediation: Case Study of Magnetic Polypropylene Nanocomposites,
Electrochromic Polymer Nanocomposites,
Epoxy Nanocomposites Reinforced with Soft and Hard Nanoparticles,
Magnetic Carbon Nanocomposites for Environmental Remediation,
Magnetic Polymer Nanocomposites for Environmental Remediation,
Magnetic Polyolefin-Based Nanocomposites,
Multifunctional Epoxy Nanocomposites,
Interfacial Polymerized Polyaniline Nanofibers/Graphite Oxide Composites Toward Electrochemical Capacitors,
Magnetic High Density Polyethylene Nanocomposites Reinfored with in-Situ Synthesized Fe@FeO Core-Shell Nanoparticles,
Electrochromic Nanocomposite Films From Poly(DNTD) Via Electorpolymerization,
Degradation of of Rhodamine B Dye Over Mn-Doped Titania Nanotubes,
Catalytic Oxidation of Arsenic (III) Over Manganese Doped Titania Nanotubes in WATER,
Magnetic Polyaniline Nanocomposites for Environmental Remediation,
Electrospun Polyvinylpyrrolidone Nanocomposite Fibers with Magnetization and Fluorescent Emission
Conversion of Hemicellulose to Furfural Using Solid Acid Catalysts in Gamma-Valerolactone, a Biomass-Derived Solvent,
Production of Biofuels From Simultaneous Conversion of Hemicellulose and Cellulose in Lignocellulosic Biomass,
Process Synthesis and Technoeconomic Evaluation of a Catalytic Biomass-to-Fuels Strategy