56 3D Printing II


Description:
While still in its developmental stage, additive manufacturing or 3D printing has been referred to as a new manufacturing revolution, enabling cutting-edge research in both bioengineering and traditional chemical engineering fields due to its ability for customization and relative speed. For Chemical Engineers and Bioengineers, applications include catalysis and reaction engineering, health and medicinal tech, separations, and more. Join us for a session where speakers will discuss how they use 3D printing as well as their successes and failures with this relatively new technology. This session will cover lessons learned and how additive manufacturing will advance in the future.

Sponsor:
3D Printing
Co-Sponsor(s):
Particle Technology Forum (03), Pharmaceutical Discovery, Development and Manufacturing Forum (26), Process Intensification & Microprocess Engineering (12E), Product Design (12G), Pharmaceuticals (15B), Next-Gen Manufacturing (T6A)


Chair:
Lin Li
Senior Staff Research Engineer
Chevron Energy Technology Company
100 Chevron Way
Richmond, CA
94802
Email: Lin.Li@chevron.com

Co-Chair:
Nima Yazdanpanah
Research Scientist
Food and Drug Administration
Center for Drug Evaluation and Research
Silver Spring, MD
Email: nima@mit.edu


Papers:
56a
3D Printed Complex Dosage Forms Embedded with Engineered BCS Class II Drug Particles
Guluzar Gorkem Buyukgoz, New Jersey Institute of Technology; Marian Abdelmalak, New Jersey Institute of Technology; Rahul Kapoor, New Jersey Institute of Technology; Jeremiah Castro, New Jersey Institute of Technology; Shen Ji, New Jersey Institute of Technology; Scott Quirie, New Jersey Institute of Technology; Murat Guvendiren, New Jersey Institute of Technology; Rajesh Davé, New Jersey Institute of Technology
56b
3D Printing for Rapid Prototyping of Innovative Process Equipment for Pharmaceutical Crystallization
Kiran Mathew Thomas, The Hong Kong University of Science and Technology; Dong ik Shin, The Hong Kong University of Science and Technology; Richard Lakerveld, The Hong Kong University of Science and Technology
56c
Direct Write of UV Curable Polymer Bonded Magnets
Alan Shen, University of Connecticut; Anson Ma, University of Connecticut; Sameh Dardona, United Technologies Research Center; Callum Bailey, United Technologies Research Center
56d
Before You Click “Print”: Regulatory Considerations for 3D Printed Oral Drug Products
Ahmed Zidan, FDA; Alaadin Alayoubi, FDA; James Coburn, FDA; Bahaa Ghammraoui, FDA; Celia N. Cruz, U.S. Food and Drug Administration; Muhammad Ashraf, FDA
56e
Two-Color Photo-Inhibited Systems for Rapid Additive Manufacturing
Martin de Beer, University of Michigan; Harry van der Laan, University of Michigan; Riley Whelan, University of Michigan; Timothy F. Scott, University of Michigan; Mark A. Burns, University of Michigan
56f
Glass-Forming Polymer Networks for Shape-Memory Contact Printing
Mitchell Anthamatten, University of Rochester; Xinquan Chen, University of Rochester; Dezhi Liu, University of Rochester
Abstract Submissions Closed
See more of this Group/Topical: Topical Conference: Next-Gen Manufacturing
<< Previous Session | Next Session >>