150 Experimental Investigation of Fluidization Processes


Description:
This session will cover topics in all aspects of fluidization and fluid particle systems involving gas/solid, liquid/solid, and gas/liquid/solid phases. Papers presenting research related to experiments elucidating the mechanism of reactive and non-reactive fluid-particle interactions and their effects on the flow systems are invited.

Sponsor:
Fluidization and Fluid-Particle Systems


Chair:
Clay Sutton
Engineering Associate
ExxonMobil
Research and Engineering
1545 Route 22 East
Annandale, NJ
08801
Phone Number: 9083353754
Email: clay.r.sutton@exxonmobil.com

Co-Chair:
Ben Freireich
Technical Director
Particulate Solid Research, Inc.
Chicago, IL
Email: ben.freireich@psri.org


Papers:
150a
Experimental Observation of the Initial Stages of Localized Fluidization
Sarah E. Mena, University of Michigan; Florian Brunier, Aix Marseille Univ, CNRS; Jennifer S. Curtis, University of California Davis; Pierre Philippe, IRSTEA, Unité OHAX
150b
Bubbles Distribution in a 0.6-m-Diameter Disk and Donut Fluidized Bed Stripper
Allan Issangya, Particulate Solid Research, Inc.; S. B. Reddy Karri, Particulate Solid Research, Inc. (PSRI); T. M. Knowlton, Particulate Solid Research, Inc.; Ray Cocco, Particulate Solid Research, Inc.; Ben Freireich, Particulate Solid Research, Inc.
150c
Magnetic Resonance Imaging of Injected Bubble and Jet Dynamics in Fluidized Beds
Christopher M. Boyce, Columbia University; Alexander Penn, ETH Zurich; Maxim Lehnert, ETH Zurich; Klaas P. Pruessmann, ETH Zurich and University of Zurich; Christoph R. Müller, ETH Zurich
150d
Experimental Validation of Indirect Conduction Model and Biot Number Analysis for Wall-to-Particle Heat Transfer
Ipsita Mishra, University of Colorado at Boulder; Aaron Lattanzi, University of Colorado at Boulder; Aaron Morris, Purdue University; Christine M. Hrenya, University of Colorado at Boulder
150e
Heat Transfer Measurement and Modelling in a Fluidized Bed with Pulsed Gas Flow
Dening Jia, University of British Columbia; Xiaotao Bi, University of British Columbia; C. Jim Lim, University of British Columbia; Shahab Sokhansanj, University of British Columbia; Atsushi Tsutsumi, The University of Tokyo
150f
Behavior of Nanosized TiO2 Catalyst in a Microjet and Vibration Assisted Fluidized Bed
Keju An, Arizona State University; Jean M. Andino, Arizona State University
150g
Identification and Characterization of Meso-Scale Flow Structure in the Dense Gas-Solid Flow in a Fluidized Bed
LI Niu, China University of Petroleum, Beijing; Mengxi Liu, China University of Petroleum (Beijing); Zhimin Chu, China University of Petroleum, Beijing
150h
Kutta-Joukowski Force: The Radial Distribution of Particles Concentration in a Riser
Yiping Fan, China University of Petroleum; Chen Li, Department of Chemical and Biological Engineering, University of Saskatchewan; Mengxi Liu, China University of Petroleum (Beijing); Chunxi Lu, China University of Petroleum
Abstract Submissions Closed
See more of this Group/Topical: Particle Technology Forum
<< Previous Session | Next Session >>