The Shear Strength of Plasma-Sprayed Hydroxyapatite Coating to Bone: The Effect of Residual Stress
Dr. Yung-Chin Yang and Wen-Bin Zhuang, Materials and Mineral Resources Engineering, National Taipei University of Technology, 1. Sec. 3. Zhongxiao E. Rd., Taipei, 106, Taiwan |
Improvement of Process Characteristics through Simulation of the Arc Spraying Process
Dr. Jean Pierre Bergmann, Fachgebiet fertigungstechnik, Technische Universität Ilmenau, Neuhaus 1, Ilmenau, 98693, Germany |
Influence of Substrate Surface Roughness on Adhesive Strength
Mr. Ｈui Yang, Hangong Wang, Xiaoping Cao and Liang Wang, Xi’an Research Institute of High Technology, hongqing, Xi’an, 710025, China |
Benefit of Surface Oxide Removal on Thermal Spray Coating Adhesion Using the PROTAL® Process
Mrs. Sophie Costil1, Hui Li1, Sihao Deng1, Hanlin Liao1, Christian Coddet1, Dr. Vincent Ji2 and Mr. Wenjun Huang2, 1LERMPS, University of Technology Belfort - Montbeliard, Sevenans, Belfort Cedex, 90010, France, 2LM3, ENSAM, 151 Blvd de l'hopital, Paris, 75013, France |
Effects of Blasting Parameters on Removability of Residual Grit
Dr. Toru Maruyama1, Mr. Kenichi Akagi2 and Prof. Takeshi Kobayashi1, 1Department of Materials Science and Engineering, Facuity of Engineering, Kansai University, 3-3-35, Yamate-cho, Suita, 564-8680, Japan, 2Graduate School of Kansai University, 3-3-35, Yamate-cho, Suita, 564-8680, Japan |
Laser Post-Treatment of Plasma Sprayed Al2O3-Cr2O3 Coatings
Dr. Pavel Ctibor1, Mr. Jiri Dubsky2, Blahoslav Kolman2, Mr. Alexandr Jancarek3 and Pavel Chraska2, 1Matertials Engineering, Institute of Plasma Physics, Za Slovankou 3, Praha, 182 00, Czech Republic, 2Materials Engineering, Institute of Plasma Physics, Za Slovankou 3, Praha, 182 00, Czech Republic, 3Department of Physical Electronics, Faculty of Nuclear Science and Engineering CTU, V Holesovickach 2, Praha, 180 00, Czech Republic |