Cold Gas Dynamic Spraying of Fe-Based Amorphous Alloy
Dr. Leonardo Ajdelsztajn1, B. Jodoin2 and Enrique J. Lavernia1, 1Dept. of Chemical Engineering and Material Science, University of California, Davis, 1 Shields Avenue, Davis, CA 95616, 2Department of Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Room A205, Ottawa, ON K1N 6N5, Canada |
Cold Sprayed Discontinuously Reinforced Aluminum (DRA)
Mr. Jeff Haynes1, Dr. Awadh B. Pandey1, Dr. Jegan Karthikeyan2 and Mr. Albert Kay2, 1Materials & Processes Engineering, Pratt & Whitney Rocketdyne, PO Box 109600, West Palm Beach, FL 33410, 2ASB Industries, Inc, 1031 Lambert St, Barberton, OH 44203 |
Cold Spraying of Refractory Metals - Powder Characteristics and Coating Properties
Dr. Stefan Zimmermann1, Dr. Hans Keller1, Mr. Tobias Schmidt2, Prof. Heinrich Kreye2 and Mr. Peter Heinrich3, 1Ceramics and Surface Technology, H.C. Starck GmbH, Kraftwerkweg 3, Laufenburg, 79725, Germany, 2Institute of Materials Technology, Helmut-Schmidt-University Hamburg, Holstenhofweg 85, Hamburg, 22043, Germany, 3Linde Gas Division, Linde AG, Carl von Linde Stasse 25, Unterschleissheim, 85716, Germany |
Optimal Particle Size for the Cold Spray Process
Dr. Dennis J. Helfritch and Victor K. Champagne, U.S. Army Research Laboratory, AMSRD-ARL-WM-MC, Aberdeen Proving Ground, MD 21005 |