Preliminary Program subject to change
Session 4: Modeling & Simulation 4: Coating Formation and Properties
Presentation Type	Oral
Summary Statement
Monte Carlo Simulation of Thermal Sprayed Coatings Mrs. Tanja Steinke and Dr. Martin Bäker, Institute of Materials Science, Technical University of Braunschweig, Langer Kamp 8, Braunschweig, 38106, Germany Application of Multiscale Modeling in the Coating Formation Simulation of APS-PYSZ-TBCs Mr. Reimo Nickel, Prof. Kirsten Bobzin and Prof. Erich Lugscheider, Surface Engineering Institute (IOT), RWTH Aachen University, Augustinerbach 4-22, Aachen, 52062, Germany Modeling of Residual Stresses Developement within Zirconia or Stainless Stell Coatings Mr. J. Patru1, P. Fauchais2, L. Bianchi3 and F. Hugot4, 1Science des Procédés Céramiques et Traitements de Surface - University of Limoges, 123 av. Albert Thomas, Limoges, 87060, France, 2Science des Procédés Céramiques et de Traitements de surface, University of Limoges, 123 Avenue Albert Thomas, Limoges, 87060, France, 3CEA, DMAT/SDI/LPTH BP 16, Monts, 37260, France, 4ENSIL, 16 r Atlantis, Limoges, 87280, France Modeling Thermal Conductivity of Thermal Spray Coatings: Comparing Predictions to Experiments Mr. Yang Tan1, Jon P. Longtin1 and Prof. Sanjay Sampath2, 1Mechanical Engineering, Stony Brook University, Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY 11794, 2Center for Thermal Spray Research, Stony Brook Univerisity, Department of Materials Science and Engineering, Stony Brook Univerisity, Stony Brook, NY 11794-2275

Modeling & Simulation