2009 Spring National Meeting: Author Index R

Ra, H. W.

3g Gasification Characteristics of CWM with Petroleum Coke and Glycerin in a 1T/D Entrained-Flow Gasifier

Rabinovich, A.

17b Characterization of a New Glid-Arc Plasmatron On-Board Reformer for An Integrated Solid Oxide Fuel Cell Auxiliary Power Unit

Raebiger, N.

36c Investigation of Mixing in Micro- and Minichannels with Reactive Fluorescent Dyes

Raghunathan, V.

77a Protection of Permanent Buildings at An Existing Upstream Oil and Gas Facility

Ramachandran, P. A.

104a Transport and Kinetic Studies in Solid Acid Alkylation Processes

Ramasamy, K. K.

35d Combined Pre-Reforming-Desulfurization of High-Sulfur Diesel for Hydrogen Fueling Station Applications

Ramey, D. W.

51a Demonstration of An Integrated off-Gas Treatment System for the Head-End of a Nuclear Fuel Recycle Plant

Ramsey, S.

74c Optical Remote Sensing of Fugitive VOC Losses

Rana, M.

102b Water Curtain Application for Forced Dispersion of LNG Vapor

Rankin, R. B.

80g Modeling CO2 Capture Using Ab Initio and Statistical Mechanical Methods

Rankin, S.

58a Microchannel Hydrocrackers for Production of High Value Fuel from Fischer-Tropsch Wax

Rao, S.

85b Enzymatic Hydrolysis of Cellulosic Sludge to Glucose

Rasmussen, C. D.

35c Multi-Fuel Direct Steam Reforming Process for SOFC Applications

Raspail, P.

36e Gas/Liquid Mass Transfer and Hydrodynamics in Microreactor: Effect of Geometry and Liquid Properties

Razavi Alavi, S. A.

59d Application of METAL Sulfates for Removing Hydrogen Sulfide FROM Gas Streams

65a Application of Various Types of Extruders in Petrochemical Industries

Read, C.

55a The U.S. Dept of Energy Hydrogen Program: Status and Performance Gaps of On-board Hydrogen Storage Technologies

Reehl, D. P.

25c Implementing a Culture of Safety and Operations Excellence at Newport Chemical Demilitarization Facility (NECDF)

Reinke, D.

23a Training Tools to Support a Global Process Safety Culture

Reklaitis, G. V.

84c Dynamic Modeling and Optimization of Thermally Coupled Dividing Wall Column Batch Distillation Processes

Repasky, J. M.

106e Ceramic and Coal: ITM Oxygen for Power Generation with Reduced CO2-Emissions

Rerat, C.

34b Modeling and Optimization of the Utilities Consumption in the Specialty Chemicals Industry

Resasco, D. E.

98d Conversion of Pyrolysis Oil

Resetarits, M.

48a On Distillation Tray Weir Loadings

64d Pressure Drop Measurements on Distillation Columns

Reverdy, F. R.

28a Update of Paper No.42609 on Economics of High Efficiency Heat Transfer in Catalytic Reforming

Reyniers, M.

75g Effect of Operating Conditions and Feedstock Composition on Run Length of Steam Cracking Coils

Rhudy, R.

106g Development of an integrated carbon capture, separation and geologic storage pilot: A technical research project of the Southeast Regional Carbon Sequestration Partnership

Ritter, J.

3b Application of Pressure Swing Adsorption in the Production of Ammonia

Ritter, J. A.

80a Carbon Dioxide Capture by Pressure Swing Adsorption

Ritzel, D.

77c Blast Response of Soft-Skinned Shelters and Occupant Vulnerability

Rix, A.

48f Upgrading a Super-Fractionator C4-Splitter with 4-Pass High Performance Trays

Robbins, G.

7a Application of Novel Compressor/Driver Configuration in the Optimized Cascade® Process

Robinson, J.

13d Naphtha Contamination and Furnace Coil Plugging

Robles, J.

87c Analysis of Operating Cases for a Complex Refinery Hydrogen System

Rode, E.

58a Microchannel Hydrocrackers for Production of High Value Fuel from Fischer-Tropsch Wax

Rodriguez, J.

25a The Impact of the BP Baker Report and Process Safety Survey

Rodriguez, R.

108f Hazards of NOx in Cryogenic Recovery Systems - Roundtable Discussion

Rogers, S. M.

38c Stream Routing Optimisation Using Rigorous Refinery-Wide Simulation

Rogers, W. J.

18a Approach for the Development of a More Efficient and Safer Process in the Pharmaceutical Industry

102d LNG Vapor Dispersion Consequence Modeling with CFD Codes

Romig, J. L.

110e Continuous Energy Improvement at EU-1544

Ropelato, K.

26b The Jet Fuel Problem Strikes Again

Ross, J.

45e Design and Pilot-Scale Tests of Monolithic Catalysts for Autothermal/Steam Reforming of Natural Gas and Biofuels

Roswell, L.

113d Palladium Sorbents for High Temperature Capture of Mercury, Arsenic, Selenium and Phosphorus from Fuel Gas

113e Surface Characterization of Palladium-Alumina Sorbents for High Temperature Capture of Mercury and Arsenic From Fuel Gas

Rothan, T. A.

104c Effectiveness of Coatings to Reduce Fouling in Shell and Tube Heat Exchangers

Rottger, D.

48f Upgrading a Super-Fractionator C4-Splitter with 4-Pass High Performance Trays

Rotureau, P.

18b Predicting Explosibility Properties of Chemicals from Quantitative Structure-Property Relationships

Rowsell, L.

113c Slipstream Tests of Palladium Sorbents for High Temperature Capture of Mercury, Arsenic, Selenium and Phosphorous from Fuel Gas

Roychoudhury, S.

35a Development of ATR Fuel Processor for Reformation of Logistic Fuels

Roza, M.

26d Demystifying the Zero Entrainment Myth

Rudman, A.

110e Continuous Energy Improvement at EU-1544

Rui, Z.

76e H2 Separation with a Pd-Cu Alloy Composite Membrane On Porous Stainless Steel Support with CeO2 as the Intermediate Layer

Rukovena, Jr., F.

64a Packed Tower Internals Important to Tower Efficiency

Rush, S.

3c Rotating Machinery for Liquefied Ammonia

Russo, P.

111d Prevention and Mitigation of Polyethylene and Hydrocarbon/Polyethylene Explosions

Rutan, C.

39a Rotating Machinery - Equipment Energy & Reliability Enhancements (Roundtable Session)

Ryu, S.

86b One Step Cellulosic Ethanol Production

Author Index: R