Author Index: B

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
B. Martin, C.
74b A Reduced Combustion Mechanism for the Simulation of Flaring
163b Using Steel Slag for CO2 Capture in Saturated Packed Bed
Backman, R.
View Ballasted Technology to Overcome Clarification Bottle Necks
Badam, V.
65v Scaling up Safely: Making Smarter Decisions about Rate Dependency
Bae, J.
194a A New Asphaltene Test Under High Temperature and High Pressure – Asphaltene Rocking Cell
Baeck, S.
163a Optimization and Economic Evaluation of Industrial Wastewater Treatment Using Electro-Oxidation Process
106d Use of Economic Value of Information to Reduce Costs and Increase Revenues
134d Experiences on Energy Retrofit of Crude Units
Baker, A.
30b  Optimization of Refrigeration and Storage Systems for Propane and Butane Export
Baldea, M.
43a Analyzing the Process Image Based on Visual Saliency and Visual Clutter
90c Analysis and Mitigation of High-Impact Residential Energy Loads from Smart Meter Data
115b Enhancing the Resolution of Process Design: Incorporating High Fidelity Process Unit Models in Flowsheet Optimization
Baldus, R.
183c Leveraging Big Data with Modeling & Self-Service Analytics for Rapid Decision Making / Capstone Technology
155c Design of a Marinized Liquefaction Process for FLNG
Banick, W. R.
36b Advanced Analysis to Supplement HAZOP/LOPA for Effective Process Design
82c Overpressure Protection By System Design - Use of High Integrity Pressure Protection Systems
189f CSB Investigation of the West Fertilizer Explosion and Fire
Bano, G.
113a Model-Based Real-Time Monitoring of Ethylene Cracking Furnaces
Bao, Z.
63v Biogas Reforming with Addition of Carbon Dioxide to Syngas over Ni-Based Bimodal Pore Catalyst
Barrera Bogoya, A.
63b Preparation and Characterization of (FURCRAEA spp) as Green Support of Iron Nanostructured Catalyst
80b Preflash Options for Light Tight Oil Processing
Basli, A.
149b Batch Process Monitoring By Dynamic Time Warping and k-Means Clustering
Bastidas Gómez, K. G.
63b Preparation and Characterization of (FURCRAEA spp) as Green Support of Iron Nanostructured Catalyst
Basu, A.
16a Scaling Liquid Flow through Packed Beds from the Laboratory to the Commercial Plant
196c An Efficient Hybrid CFD-DEM Modeling Framework for Industrial Drum Coating Operations 
Batarse, J. C.
13b Advanced Procedures: Leveraging a Human Factors Approach for Improving Process Safety Performance
Baudendistel, T.
31a Water-Flexible Fracturing Systems
155a Full Range Natural Gas Processing
Baxter, C.
75a Depolymerization of Lignin in the Production of High-Valued Chemicals By Ethanolysis
180a Template-Free Synthesis of Hierarchical Zeolites for Petrochemical and Refining Processes
Baxter, L. L.
46b Increased Stability of a Power Grid by Energy Storage of Cryogenic Carbon Capture
138c Transient Natural Gas Liquefaction Process Comparison- Dynamic Heat Exchanger Under Transient Changes in Flow for Energy Storage with Cryogenic Carbon Capture (CCC-ES)
189a Process Safety Incidents: Big Picture Revelations
106b Features of a Modern Control System
182a Tuning PID Controllers on Integrating Process with Complex Dynamics
182b Modernizing Control Functionality, Easy Steps to Start Process Optimization
182c Specifying Control Valve Performance to Achieve Process Performance Goals
Bearrow, M.
130c Big Data Doesnt Really Mean Big Intelligence
Beck, B.
74a Recent Developments and Current Insights in Ethylene Flare Technology: The Impact of Burner Design, Vent Gas Variability and Ancillary Equipment
63a The Principle of Intrinsic Reality: Solving the World's Woes through Chemical Engineering and Economics
Belonger, D.
173c CCPS Certification Process for Certified Process Safety Professional
Beltrami, F.
18c Pressure and Temperature Optimization for Fluids Produced by Deepwater Oil or Gas Wells: A Study on Current Achievements and Possible Future Developments
Ben, L.
106c Getting Your Automation Project Approved
182b Modernizing Control Functionality, Easy Steps to Start Process Optimization
64ai CSB Recommendations: Gems, Gewgaws, and Buried Treasure
86a Design, Operation and Startup Strategy of a New Parallel C2 Splitter
Bershad, S.
112c NFPA Combustible Dust Standards - 2016 Update
44a One Company's Observations on the Implementation of LOPA
Bertok, B.
115c Planning Optimal River Transport of Petrochemicals Concerning Uncertainties of Water Levels by Two Stage P-Graph
Besancon, B.
94b A Comparison of Mixed Integer Linear and Nonlinear Programming Models for Pipeline Network Optimization
164e Developing Abnormal Situation Management Skills in Ethylene Plant Console Operations
Beum, H. T.
103b Calcium Removal from Heavy Crude Oil Using Aqueous Solution Containing a Calcium Removal Agent
Bhagwat, S.
174d Cyclopentane Hydrate Formation in Water-in-Model Waxy Oil Emulsions
119c Process Optimization for Small Scale LNG Plants
View CCSI – Accelerating Carbon Capture through Modeling
Bhattarai, S.
61c Study of Reaction Between Hydroxyl Radical and β-O-4 Lignin for Understanding of Termites Lignin Deconstruction Mechanism
Bhavsar, P.
68b Big Data Based Models of Operators Cognition and Situational Awareness during Process Operations
Bieker, M.
188c Olefins Column Troubleshooting and Process Improvement Project
Bigger, K.
100d Rating Model for Plate-Fin Exchangers for NGL Recovery Units
140b Recovery of Light Olefins and NGLs from Refinery Off-Gas
Bihl, S.
176a State-Based Control and the Value Delivered from the Initial Design through the Operating Life of the Facility
Birkett, M.
100c Thermal Energy Storage System Based on a Pphase Change Material for Automotive Applications
Black, D.
64ad Leveraging Data from a Quantitative Risk Assessment to Determine Blast and Fire Risk to Safety Critical Equipment in the Chemical and Refining Industries
Blaylock, W.
100e Modeling of Thermal Gradient Sublimation
117a Evaluating the Effect of Obstruction Separation Distance on Flammable Gas Dispersion Using FDS
Boes, S.
77a Air-Cooled Heat Exchanger Reliability
Bompelly, R.
65r Assessing Risk in the Supply Chain Using the Bowtie Method
Borissova, A.
113d Design Optimisation for Optimal Shape Selection of Solar Parabolic Trough Receiver
Botre, C.
158b Nonlinear Partial Least Square (PLS) Methods with Generalized Likelihood Ratio Test (GLRT) for Fault Detection and Diagnosis of Chemical Processes
Boukouvala, F.
201a Big Data Analysis and Global Optimization for Petrochemical Planning Operations
Braatz, R. D.
21b Challenges and Research Directions in Big Data
Brautaset, O.
153b Quantitative Risk Analysis for Decision Support in Process Plant Operations
80c UOP RZ PlatformingTM Technology - Maximizing Profitability from Tight Oil
88a Aspen Model for Propane/Propylene Separation By Pressure Swing Adsorption Using Carbon Molecular Sieves
Bremer, B.
72a Save Energy without Investing Capital
111b Big Data Analytics in Oil & Gas
36c Identify SIF and Specify Necessary Sil, and Other IPLs, As Part of PHA/HAZOP, or Why It Is Not Necessary to “Boldly Go Beyond HAZOP and LOPA”
65q Best Practices for Writing Operator Procedures and Trouble-Shooting Guides
View Necessity of Performing Hazard Evaluations (PHAs) of Non-normal Modes of Operation (Startup, Shutdown, & Online Maintenance)
65aa Critical Considerations in the Pressure Relief Analysis of Refinery Sour Water Systems
Brigman, J.
65ae Compliance with Process Safety Management Elements
Brignone, M.
96b Heat Exchanger Selection Improves the Performance of Refinery Preheat Trains: Industrial Case Studies
Broadhurst, P. V.
148a Simplifying Hydrogen Production
161a Do You Feel Lucky? or Do You Want to Identify and Manage Safety - Critical Equipment?
Brooke, H.
183b Modeling and Monitoring of Batch Processes in Relative Time
86b Interpretation and Application of EN 746-2 Requirements to the Design and Operation of Burner Management Systems on Cracking Furnaces
Brown, M.
60b Process Safety - You're never too old to learn!
Bruner, T.
65a Realizing the Importance of PSM: A Young Engineer's Perspective
Bruney, J.
116a LOPA - When the Solution Becomes the Problem!
Bryce, B.
View WIC AIChE: 12 Steps for a Successful Career Transition
Bub, A.
155a Full Range Natural Gas Processing
Buchman, A.
167c Verification of in-Service LP Tank Pressure Ratings
195d Big Data Analytics Applied to Real-World Control Systems - from Instruments to Advanced Controls
137a Gas/Liquid Scrubber Performance Testing at Field-like Conditions
Budiansky, N.
189b Accidents during Turnarounds, Cleanings, and Other Infrequent Operations
Buetehorn, S.
87b Cyclic Operation of Distillation Columns
Bui, A.
55a Multiphase Flow Modeling of LNG Using Smoothed Particle Hydrodynamic (SPH) Techniques
65c Quantifying the Impacts of Human Factors on Functional Safety
65i Assessing Safety Culture Via the Site Safety Index
Bukur, D. B.
65al Experimental Measurements of Flammability at Elevated Conditions Using Thermal Criterion
Bullemer, P.
102a Human Reliability and Process Safety Metrics: Considerations from an Abnormal Situation Management Perspective
Burgan, B.
65bl Simple Objects As Indicator of the Severity of Vapour Cloud Explosions
Burgers, J.
100c Thermal Energy Storage System Based on a Pphase Change Material for Automotive Applications
65ab How Process Safety Information Affects the Quality of a Process Hazard Analysis
93b Considering External Fire to be a Non-Applicable Overpressure Scenario
Burleigh, A.
191e Process Investigations Using Radioisotope Techniques
70a Facilitating Real-Time Decision-Making of Marine Terminal Operations
70b Financially Risk-Aware Strategies for Rescheduling Plant Maintenance Turnarounds in Integrated Sites
Busby, K.
65e Maintaining Consistency in the Determination of Consequence Severity Rankings for Process Hazard Analyses
Busque, M.
65r Assessing Risk in the Supply Chain Using the Bowtie Method
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z