Author Index: M

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Ma, S.
86g Ethylene Cracking Furnace Burner Applications Operating with Significantly Less Than 90 mg/nm3 NOX Emissions
192c A New Era in on-Purpose Butadiene (OPBD) Technology
Macchietto, S.
186c Cleaning Heat Exchangers: How, When, Where and How Much?
Maciejewski, A.
127b Unique Pre-Cleaning Passivation Challenges in Cooling Water Systems
Madden, L.
65q Best Practices for Writing Operator Procedures and Trouble-Shooting Guides
Madenoor Ramapriya, G.
139a Novel Dividing Wall Columns for Ternary and Quaternary Distillation
Maganti, S. K.
24a Effective Relief System Evaluation through Process Safety Information Optimization
Magenes, L.
28c CFD Modeling of Jet Fires of Different Configurations
198c Development of Accurate Crude Unit Model from Operating Data to Improve Refinery Profitability
104b PSM/RMP Modernization Programs in California - New Developments and Correlation to Evolution at the Federal Level
Mahmud, M. A.
90b A Statistical Analysis of Sloshing Parameters for Multiphase Offshore Oil & Gas Separators
196b A Different CFD Approach to Model Sloshing of Offshore Multiphase Separators
Mahoney, L.
68c Common Myths and Misconceptions of Online Analyzers
26b Stable Membrane Processes for Enhanced Olefin-Paraffin Separations in Refineries and Polyolefin Plant
Malallah, A.
63bb Using a Large Data Bank to Develop a Robust and Simple Model to Estimate the Saturation Pressure of Oil Reservoirs
65u Safe Depressurization of Large Thickness Vessels Under Pool Fire
146c Inherently Safe Design for Vertical Knock-out Drums and Vapor/Liquid Separators
51b Ammonia Vapor Cloud Explosion Testing and Implications for Facility Siting Studies, Consequence Analyses, and Risk Assessments
Mallinson, R. G.
71c A Novel Multi-Stage Biomass Thermal Fractionation Process for Fuels and Chemicals
49b Application of Dividing-Wall/Thermally Coupled Distillation Columns: Case Studies of Retrofitting and Debottlenecking a Chemical Plant
53b Boiler Emissions Reduction through Humid Combustion
Manivannan, R.
200f Comparative Analysis of Phase Doppler Interferometry (PDI) Data Obtained in Forward-Scatter and Back-Scatter for Entrainment Applications
Mankin, K.
135b Supercharge Styrene Polymerization Control with Dorf Ketal ACtifyTM Technology
Mannan, S. M.
13b Advanced Procedures: Leveraging a Human Factors Approach for Improving Process Safety Performance
32a Incorporating Process Safety Risk in Design and Optimization of Hazardous Chemicals Supply Chain
65ai Fire Hazard Associated with Polymers and Application of Polymer Nanocomposites for Flame Retardancy
65al Experimental Measurements of Flammability at Elevated Conditions Using Thermal Criterion
65bb Application of Computational Fluid Dynamics (CFD) for Liquefied Natural Gas (LNG) Pool Spreading and Vaporization on Water
65y A Fuzzy Logic and Probabilistic Hybrid Approach to Quantify the Uncertainty in Layer of Protection Analysis
Mansouri, M.
113b Improved Fault Detection Using a Moving Window Generalized Likelihood Ratio Test
158b Nonlinear Partial Least Square (PLS) Methods with Generalized Likelihood Ratio Test (GLRT) for Fault Detection and Diagnosis of Chemical Processes
Manthanwar, A. M.
View Smart Manufacturing Framework for the Production of Hydrogen Energy
97b The Environmental Equivalent of a Fatality: Had the UK's Environmental Risk Assessment Methodology Been Applied to Freedom Industries in West Virginia, It Would Have Concluded the Site Was Intolerable before 350,000 People Were Exposed and Lost Their Drinking Water
Manzano, K.
100a Deja Vu All over Again: Another Look at Evaporative Cooling
150b Mechanism-Free Chemical Kinetics. Part 3. The Phenolphthalein/Base Reaction
Maramba, T.
119c Process Optimization for Small Scale LNG Plants
Marcel, J.
65ag Availability Assessment of Water and Energy, a Proposition of Management to Chemical Industry
Marcon, S.
158c Energy Consumption Reduced By 8% in an Aromatic Extraction Plant
Marin, G. B.
184b Computational Fluid Dynamic Design of Steam Cracking Reactors: Simulation of Dynamic Coke Growth
Mariño, O.
65ak Analysis of Fire Extinguishing Methods in Engine Control Rooms
Markowski, A. S.
65y A Fuzzy Logic and Probabilistic Hybrid Approach to Quantify the Uncertainty in Layer of Protection Analysis
Marriott, J.
153c Depressurization of CO2 Rich Mixtures: Challenges for the Safe Process Design of CCS Facilities and CO2 EOR Systems
Marshall, K.
187a Using All the Tools in the Toolbox - Case Studies in Process Improvement
84a Process Safety: The Culture of Management System Design, Implementation, and Sustainability
Marshall, M.
View Necessity of Performing Hazard Evaluations (PHAs) of Non-normal Modes of Operation (Startup, Shutdown, & Online Maintenance)
Marszal, E.
65bk Automated Optimization of Gas Detector Placement
175b Leveraging PHA to Develop Requirements for Cyber-Security
Martin, C.
74c Modeling Flare Performance Using Closed-Form and B-Spline Mathematical Functions
118b Conversion of Synthesis Gas into Ethanol Using Homogeneous Catalysts
Martin, M.
74a Recent Developments and Current Insights in Ethylene Flare Technology: The Impact of Burner Design, Vent Gas Variability and Ancillary Equipment
74e Computational Fluid Dynamics Simulation of Multi-Point Ground Flare Fields for Detailed Radiation and Plume Estimation
109c Heater Recirculation Pattern Analysis and Burner Spacing Optimization
Martin, T.
174d Cyclopentane Hydrate Formation in Water-in-Model Waxy Oil Emulsions
Martinez, C.
193b Selective Acetylene Hydrogenation with OleMax207 for Back End Units
Martinez, K.
55c Flare Reduction Strategies for LNG Plant Design
Martinez, M.
88a Aspen Model for Propane/Propylene Separation By Pressure Swing Adsorption Using Carbon Molecular Sieves
193b Selective Acetylene Hydrogenation with OleMax207 for Back End Units
Martyanov, O. N.
186d The Stratification of Crude Oil Residues at Elevated Temperatures Detected Via in-Situ ESR
4d Charlie Colwell's Achievements and Correlation
73b Is a Two-Inch Hole Adequate for a Siting Study?
Marx, R.
2a Improving Temperature Measurement and Control Using the Exactus Optical Thermometers
Masoumi, M. E.
53c Improvement of Energy Consumption in Crude Distillation Unit of Tabriz Oil Refinery Using Exergy Analysis
Matarredona, A.
49b Application of Dividing-Wall/Thermally Coupled Distillation Columns: Case Studies of Retrofitting and Debottlenecking a Chemical Plant
Matos, C.
53a Wireless RV Monitoring in Oil & Gas Facilities
Matsumoto, K.
14a Overview of the High Pressure Gas Safety Act in Japan
Matzopoulos, M.
113a Model-Based Real-Time Monitoring of Ethylene Cracking Furnaces
Mauck, S.
150c Mechanism-Free Chemical Kinetics: Part 4. Design of Inherently Safe Chemical Plants
Maurina, K.
153a Human Factors Engineering:  Applying Prescriptive and Performance Standards Across the Globe
May, E. F.
18b Hydrate Blockage Formation in Gas-Dominant Systems
152b Risk-Based Estimation of Hydrate Blockage Risk in Oil and Gas Flowlines
152c Anti-Agglomerant Benchmarks at Interfacial and Macroscopic Length Scales
152d Hydrate Formation and Deposition Rate Studies in a Gas-Dominant Flowloop
174a Novel Experimental Methods to Quantify Surfactant Adsorption to Hydrophilic-Lipophilic Interfaces
174b Magnetic Resonance Measurements of Hydrate Shell Growth in Oil
174c Rheological Characterisation of Hydrate-in-Oil Slurries
181b Chemical Control of Asphaltene Aggregation from Cohesive Force Measurements
Mayo, J. T.
54b Generating Heterogeneous Proppant Placement in Hydraulic Fracturing by In-Situ Channelization
Mayo, M.
65ab How Process Safety Information Affects the Quality of a Process Hazard Analysis
Mazyar, O. A.
63k Functionalization of OH-Terminated Nanoparticles By Cyclic Azasilanes
McBride, E.
111c Moving the Needle through Transaction Level Analytics
McCarley, K. C.
87c Prediction of Valve Tray Pressure Drop
188d Effect of Liquid Distribution on Structured Packing Performances
191a Distillation Tray Operation
191b Distillation Packing Operation
200f Comparative Analysis of Phase Doppler Interferometry (PDI) Data Obtained in Forward-Scatter and Back-Scatter for Entrainment Applications
38a Reflecting on the Past Envisioning the Future: A Vision 2020 Primer
95b Used, Classic, or Antique; Solving the Enigma of Disciplined Adherence to Standards for Existing Equipment
McClung, A.
43b Extracting Relevant Quality Information through Image Data Analysis
McDougall, E.
89c Economic Optimization and Hazard Analysis of a Hydrofluoric Acid Catalyzed Alkylation Process
McGinnis, M.
144c Personal Growth and Mission Born from Tragedy
McGrath, C.
63ah Hydrogen Disposal Flare System Hazard Identification and Mitigation Analysis
McGrath, K.
3c Dry Gas Seal System for Large Ethylene Compressors
41a Compressor for Ethylene Plants - 101 Tutorial Session
McLendon, B.
91a CO2/Brine/Rock Interactions Under CO2 Sequestration Conditions
McPike, I.
93b Considering External Fire to be a Non-Applicable Overpressure Scenario
Mebane, D. S.
View CCSI – Accelerating Carbon Capture through Modeling
108c Preliminary Evaluation of High-Pressure Circulating Fluidized Bed Biomass to Fuels Technology
Mehta, A.
16c Strategy for Designing a Successful Pilot Plant
Mehta, S.
111a ProcessMD: Capturing the Heartbeat of our Plants through Advanced Analytics
Meinen, D.
127d Utilizing Ultrasonic in-Line Inspection Technology to Manage Ethylene Furnace Convection Section Reliability
Melancon, P.
120a Integration of Divided Wall Columns in a Shale Oil Processing Unit
Melendez, A.
194b On the Evaluation of the Performance of Asphaltene Dispersants
93a RAGAGEP Considerations for Relief and Flare Systems
Melhem, G.
133b Using a Burning Rate Model for Deflagration Vent Sizing
Mendez, J.
65ak Analysis of Fire Extinguishing Methods in Engine Control Rooms
Meng, S.
194b On the Evaluation of the Performance of Asphaltene Dispersants
Meng, Y.
View Evolution of Domino Effect Modeled by Bayesian Network in Land Use Planning
Mentzer, R.
65bb Application of Computational Fluid Dynamics (CFD) for Liquefied Natural Gas (LNG) Pool Spreading and Vaporization on Water
Merenov, A.
88c Equation Oriented Approach for Solving Complex Flowsheets
134b Equation Oriented Approach for Solving Complex Flowsheets
Michaels, W.
67a Lehigh University: Crude Lights End
86b Interpretation and Application of EN 746-2 Requirements to the Design and Operation of Burner Management Systems on Cracking Furnaces
Migliavacca, M.
185b New Refinery Wastewater Treatment Plant at Petron Bataan Refinery in the Philippines
Miller, D. C.
View CCSI – Accelerating Carbon Capture through Modeling
Miller, D.
110d Process Development for Synthesis of Bio-Based Plasticizers
Miller, D.
28b New Model for Predicting Thermal Radiation from Flares and High Pressure Jet Fires for Hydrogen and Syngas
Miller, G.
97a Transportation Risk Management - One Company's Approach
Min, M.
163c New Approach to Using 3-D Dispersion Modeling for Accidental Toxic Gas Releases in Downtown Seoul
Miramontes, J.
80c UOP RZ PlatformingTM Technology - Maximizing Profitability from Tight Oil
114b Next Generation Phenol Technology
Mirri, F.
52b Entrepreneurs Guide to Starting a Company
10a “Why All This Talk about Failure? What Happens If We Succeed?”
173a New CCPS Guideline Book: Guidelines for Recognizing and Responding to Normalization of Deviation
121b A Call to Action: Understanding the Key Driver for Continual Process Safety Performance Improvement
Mohammad, R.
50a Rigorous Simulation of a Crude Distillation Unit with Heat Exchanger Network
Mohan, L. S.
196a CFD Modeling of Fouling in Crude Oil Refinery Heat Exchangers: Effect on Heat Transfer and Fluid Flow
Mohedas, S.
66c Modeling of the First of a Kind Technology for the Process Design Packages
Mohundro, E.
193a Acetylene Hydrogenation Tutorial
Molazemi, K.
64aa Dynamic Barrier Management - Addressing the Reality
66b CFD Simulation of an Industrial High-Efficiency FCC Regenerator
101b Assessment of Liquid Distribution in a VGO-Hydroprocessing Trickled Bed Reactor with Computational Fluid Dynamics
109a CFD Simulation of a Coke Drum for the Evaluation of Coke Deposition on the Outlet Pipe of the Reactor (Vapor Line)
184c Analysis of the Particle Reynolds Number in a Gas-Solid Down-Flow Reactive System Using Computational Fluid Dynamics
Mondor, C.
57a Accurate Modelling of Acid Gas Cleaning Processes
Monnier, N.
64ac Particle Size Reduction on the 20L Sphere, a Computational Approach
161c Best Practices for Performing Data Mining from Unstructured Data for Mechanical Integrity
Moon, I.
65g Learning Lessons from a Big Chemical Disaster in Korea
Moore, J. J.
3a Rotordynamic Considerations of Large Frame Centrifugal Compressors for Ethylene Service
Moore, W.
185c It's All about the Money, Reducing Operating Costs in Heavy Metals Wastewater
Morgan, B.
65l Sustainable Risk Reduction with Dynamic Execution of Procedures for Any Operating Condition
Morgan, N. T.
100e Modeling of Thermal Gradient Sublimation
Morneau, B.
106d Use of Economic Value of Information to Reduce Costs and Increase Revenues
Morris, J.
122a Feasibility Study for Hydrogen Sulfide (H2S) Optical Gas Imaging
Morrison, D.
13c Human Factors Considerations in 3D Model Reviews
84b Bridging Process and Occupational Safety Cultures for the Process Safety Professionals
131b Becoming "Wiser" in Management of Change
Morrissy, S. A.
152c Anti-Agglomerant Benchmarks at Interfacial and Macroscopic Length Scales
174a Novel Experimental Methods to Quantify Surfactant Adsorption to Hydrophilic-Lipophilic Interfaces
181b Chemical Control of Asphaltene Aggregation from Cohesive Force Measurements
49a Modeling a Low-Severity Ethylene Oligomerization Process
Mortensen, H. J.
137b Solutions to Challenges in Hydrotreating Sour Fuel Gas
Mosca, G.
87a Maximize Tray Deck Performances
Moskowitz, I.
146a Process Accident Prediction Using Transition-Path Sampling
36a High/Continuous Demand Hazardous Scenarios in LOPA              
Moucha, T.
200e Analogy of Mass Transfer in Absorption and Distillation Columns: Wetted Wall Column Study Distillation
Mu, S.
170b Study on Dynamic Risk and Flexible Protective Layer Theory of Process Safety
Mueller, T.
17a Beyond HAZOP and LOPA – Four Different Company Approaches
Müller, G.
158c Energy Consumption Reduced By 8% in an Aromatic Extraction Plant
Müller, M.
158c Energy Consumption Reduced By 8% in an Aromatic Extraction Plant
Mullowney, T.
92a Careers in PSM Panel Discussion
Mumm, J.
156c Dynamic Simulation Modeling to Protect Flare Headers from Air Ingress
Mummudi, M.
196c An Efficient Hybrid CFD-DEM Modeling Framework for Industrial Drum Coating Operations 
118b Conversion of Synthesis Gas into Ethanol Using Homogeneous Catalysts
Muñoz Giraldo, F.
51c Catastrophic Domino Effect from Projection of Fragments Associated with Spherical Vessel Explosions
64a Inherently Safety Quenching of HCN Polymerization with Phosphoric Acid
64ac Particle Size Reduction on the 20L Sphere, a Computational Approach
65ah Assessment of the Mechanical Integrity of a Pipeline with Metal Loss, Using Finite Element Method
65ak Analysis of Fire Extinguishing Methods in Engine Control Rooms
65an Reference Framework for the Application of Quantitative Risk Analysis for Hydrocarbon Pipelines, Coupled with Uncertainty Treatment Methods: Techniques for Analysis and Modelling Methods
65az Probit Models for the Determination of Damage Probability of Storage Tanks Due to Flooding Impact
Murdiadi, D.
64x Assessing the Risk from Helicopter Operation at Offshore North WEST JAVA FIELD
Murillo, C. H.
64ac Particle Size Reduction on the 20L Sphere, a Computational Approach
Murnen, H.
26b Stable Membrane Processes for Enhanced Olefin-Paraffin Separations in Refineries and Polyolefin Plant
15b Surviving the Black Swan, Strategies for Process Safety Specialists and Companies to Survive Unpredicted Catastrophic Events
Murphy, M.
133b Using a Burning Rate Model for Deflagration Vent Sizing
Murugesan, S.
63o Stimuli-Responsive Rubber in Oil and Gas Application
Myers, J.
183c Leveraging Big Data with Modeling & Self-Service Analytics for Rapid Decision Making / Capstone Technology
64b Using Data Analytics to Improve Process Safety
189b Accidents during Turnarounds, Cleanings, and Other Infrequent Operations
Mynaugh, J.
178a The Change Accelerator: Integrating Operability and Reliability into Your Culture
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z