Author Index: M

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Ma, B.
115b Risk Management Program (RMP) for Chemical Industry in Korea
Maat, C. A.
195d Molecule Tracking – A New Way of Analyzing Distillation Columns
Macchietto, S.
29a Evaluation, Prediction, Management and Mitigation of Fouling in Heat Exchanger Networks for Improved Energy Efficiency
112b A Novel Way of Monitoring Heat Exchanger Performance:  the Dynamic TH-λ Plot
113c Retrofitting Heat Exchangers with High Shear Stress Design: Evaluating the Impact on Performance of Crude Pre-Heat Trains
135a Monitoring and Analysis of Inorganics Breakthrough in Refinery Pre-Heat Trains
193c Engineering Innovation By Design: The Uniheat Project
MacGowan, J.
162b Leveraging Advanced Process Control for Operational Excellence
Macías Juárez, A. M.
31a Aplicación De Las Alarmas Criticas De Proceso (CON Respuesta del Operador) En Las Industrias De Alto Riesgo
48b LOPA: Ventajas De La Buena gestión De Las Capas De protección
Madison, Ph.D., M.
View Why Sustainability Is Important at Conocophillips
Maganti, S. K.
57m Key Modeling Parameters and Process Safety Information for Effective Atmospheric Dispersion Modeling
Maher, S. T.
142b PSM/RMP Modernization Programs in California - 2016 Developments and Correlation to Evolution at the Federal Level
154c Using HAZOP/LOPA to Create an Effective Mechanical Integrity Program
Maher, PE CSP, S. T.
57cd Effectively Utilizing Calarp/RMP/PSM Contractors to Assist in Optimizing Process Safety Culture, Compliance with Standards, and Workforce Involvement
Mahoney, A. W.
189b Big Data Process Modelling with Parallel Graphics
Maifield, D.
187c Key Technology Challenges for Megacrackers
Mainardi, D. S.
66c Initial Steps Toward Coarse-Grained Metal Segregation during the Solidification of Ti-Al- V Alloys
128b Predictor of Fischer Tropsch Catalyst Performance for 55-Atom Metal Clusters
Majumdar, S.
124d Olefin-Paraffin Separation with Customized Amorphous Fluoropolymer (CAF) Facilitated Transport Membranes
Malczewski, U.
57at Review and Analysis of Recent Cyber Security Attacks
Maliakkal, G.
148a API-RP521 Psv Capacity Calculation Compared Against Universal Bernoulli's Homogeneous Equilibrium Method
Malik, D.
91b Real World Applications of API 753
Malvey, L.
63d Miniaturized Biomass Gasification System for Onboard Applications
Manchenahalli, M.
110a Life Cycle Analysis of Hydrogen Gas Used for Biogas Upgrading Process in Expanded Granular Sludge Bed Reactor
Mander, T.
43a Elongated VCE Blast Waves and Structural Damage
Manivannan, R.
195a Quantification of the Effect of Viscosity on Point Efficiency of Sieve Trays in Distillation Columns
195b Investigating the Impact of Feed-Air Saturation in Air-Water Spray Entrainment
Manjunath, K.
56u An Understanding of Hazards Analysis Using LOPA for Plants Handling and Processing Combustible Dust Products
Mann, V.
172a Linear Dynamic Model Identification and Data Reconciliation Using Dynamic Iterative PCA (DIPCA)
Mannan, M. S.
25c Aerosol Generation Approach and Aerosol Combustion Behavior Study
53a Process Safety Problems Caused By Hydrate Formation in Deepwater Production Operations
53b Comprehensive Review on Hazards Related to Lithium-Ion Batteries Technology
53c Theoretical Evaluation of the Reactivity for Hydroxylamine System using a Kinetic Model Approach
53d Application of the Density Functional Theory (DFT) to Study the Decomposition Pathway of Nitroarenes
56g Existing Challenges in Incorporating Process Safety Management in Developing Countries
56o Probabilistic Risk Assessment Tool Applied in Facility Layout Optimization
57ai A Leading Indicators Based Decision Support Tool to Predict Blowout Events
57au Resilience-Based Survival Analysis in the Event of a Process Upset: A Case Study of Utility Plant
57az Studying the Relationship Between Inherently Safer Design and Equipment Reliability
57j Developing a Methodology for Process Selection in Pharmaceutical Industry Based on Inherent Safety Considerations: A Case Study on Batch Vs Continuous Process
57k Risk Based Decision Making Methods for Evaluating Complex Technologies, a Comparative Analysis on Pipelines and Railroad for Crude Oil Transport
57p Review and Analyze the Effects of Parameters for H2s Gas Mixture Dispersion Models: Degadis and CFD Models
67a A Systematic Approach to Alarm Design with Application to the Tennessee Eastman Problem
79c A Look into Cumulative Risk Assessment: Past, Present and Future
98c Inherently Safer Reactor Design: Challenges in the Changeover from Semi-Batch to Continuous
119b The Integration of Inherently Safer Design and Control
166a Industrial/Academic  Partnership – A Case Study in the US
171c An Integrated Prediction Model for H2S/CO2 Corrosion in the Pipe of Refinery
Manousiouthakis, V.
View Intensification of Processes yielding Renewable Bio-Products: Theory - Experiments - Field Applications
Mansouri, M.
76b Multiscale Representation of Improved Multi-Kernel Partial Least Square Technique for Process Monitoring of the Industrial Processes
Manton, M.
72b Current State of Bow Tie Risk Assessment Method
Manzano-Ruiz, J. J.
44a Estimation of Methanol-Pill Batch Size for Hydrate Prevention in Offshore Oil & Gas Subsea Operations
March, C.
7b Achieving the Next Level of Asset Integrity with Predictive Maintenance
March, K.
193d Advanced Simulations in Pilot Plant Process Development for Hydrotreating Bioderived Feedstocks to Finished Specification Fuels
Marin, G. B.
36c Oxygen-Containing Contaminants and Steam Cracking: Understanding Their Impact Using COILSIM1D
Maroor, S.
2c Model-Based Real-Time Monitoring of Ethylene Cracking Furnaces
81c Improving Overall Ethylene Plant Performance By Optimising C2 Hydrogenation
Marsegan, C.
182c Overfill to Overpressure – Investigation Findings and Contributing Events to the Capeco Explosion
Marshall, A.
194a Overview of Current and Future Environmental Challenges
Marshall, K.
41b Achieving Targeted Product Mix Using Optimization Tool for Chemical Plants with Multiple Products
193b The Right Combination - New Products from Readily Available Feedstocks
Martin, C.
68c Optimization for Flare Operation
Martin, M.
68a Parameters for Properly Designed and Operated Ground Flares: 2017
Martin, T.
105b Combining Add-on Technologies for Gsp Plants with up-to-Date Plate Fin Heat Exchanger Design
Martinez, L.
153c Enhanced Safety in LNG Plant Design
Martinez, M.
105a Iron-Containing Carbon Molecular Sieve Membranes for Advanced Olefin/Paraffin Separations
124f Kinetic Study of Thermal Decomposition of N,N-Diethylhydroxylamine (DEHA) in Steam Crackers
Martinez-De la Hoz, J. M.
181d Calculation of Optical Properties of Molecular Dyes Using Time-Dependent Density Functional Theory (TD-DFT) and Development of Quantitative Structure-Property Relationships (QSPR)
Marton, A.
62c Successful Integration of Turnarounds and Capital Projects
Marx, J. D.
57w Revisions to the Qmefs Vapor Cloud Explosion Model
143c Q&A on QRA
Mashuga, C.
57aa Thermal Decomposition of Mono-Nitrated Toluene (MNT) with Additives
Mason, B.
52a Strategies for Mitigating Crude Unit Threats
Masoumi, M. E.
113d Performance of the Artificial Neural Networks for Estimation of Pool Boiling Heat Transfer Coefficient of Alumina Water-Based Nanofluids
Massant, M.
8b Building a Group Process Safety Management System for a Non-Chemical Industry
Mathias, P. M.
82e Component Trapping with VLE Uncertainty: Principles and Troubleshooting
Matsuoka, K.
53h Production of Hydrogen By Methane Decomposition Using Fe-Supported Alumina Catalysts
Matzopoulos, M.
2c Model-Based Real-Time Monitoring of Ethylene Cracking Furnaces
Maupin, G. D.
84a Hydrothermal Liquefaction of Wet Waste for the Economical Production of Sustainable Liquid Fuels
May, E. F.
26b Development and Experimental Validation of Hydrate-Philic Surfactants
26c Hydrate Deposit Formation and Dissociation in Gas-Dominant Systems: Experiments and Modelling Using a High-Pressure Miniloop
60d Hydrate Formation Experiments in a Lab-Scale Vertical Flowloop
60e Reduction of Hydrate Film Growth Rate and Cohesive Force By Surface Active Components in Crude Oil
60f A New Transient Framework for Assessing Hydrate Formation
60g Rheological Characterisation of Hydrate-in-Oil Slurries
70b A Probabilistic Method for Quantifying Risk in Hydrate Forming Systems
70c Development of a Predictive Model for Hydrate-in-Oil Slurry Viscosity
Mazzola, T.
57f The Jack Rabbit II 2015-2016 Chlorine Release Field Trial Experiments
McAdon, M.
190b Connecting the Dots – Gaining Insight from Big Data in Hydrocarbons Manufacturing
McAfee, T.
73b Automatic Control of Polymer Molecular Weight during Free Radical Polymerization
73c Automatic, Simultaneous Control of Polymer Composition and Molecular Weight during Copolymer Synthesis
95b Real Time Optimal Control and State Estimation in Semi-Batch Free-Radical Polymerization Reactors
McBride, E.
179a Moving the Needle with All Data, Big and Small
McCarley, K. C.
186d Energy Savings & Distillation
195a Quantification of the Effect of Viscosity on Point Efficiency of Sieve Trays in Distillation Columns
195b Investigating the Impact of Feed-Air Saturation in Air-Water Spray Entrainment
McCavit, J.
152c Ten Years of Living Risk Based Process Safety
McClarren, R.
2a Artificial Intelligence and Machine Learning for Ethylene Plant Operation
McCoy, E.
104b Understanding California’s Low Carbon Fuel Standard, Lcfs
McCready, C.
65a Industrial Application of Multivariate Modeling Methods for Process Forecasting and Model Predictive Control
McDowell, L.
52b Deep Desulfurization Guardbeds for Hydrocarbon Processing
View Effective Networking
McGrath, T.
72b Current State of Bow Tie Risk Assessment Method
McGuire, P.
187e Safely Overcoming Capacity Constraints Challenges Using UOP Process Equipment and Callidus Flares
McHugh, M. A.
175c Density Measurements and Thermodynamic Modeling of Two Crude Oil Samples
McKenzie, A. J.
60e Reduction of Hydrate Film Growth Rate and Cohesive Force By Surface Active Components in Crude Oil
McLeod, R.
72b Current State of Bow Tie Risk Assessment Method
McMillan, C.
164a Critical Leadership Moments
Medina, J.
48c Aprendiendo De La Experiencia – Investigación y anáLisis De explosión De Una Caldera Desde La óptica De Una Compañía Aseguradora (Administradora de Riesgos Laborales)
Medrano, M.
193d Advanced Simulations in Pilot Plant Process Development for Hydrotreating Bioderived Feedstocks to Finished Specification Fuels
Mehta, A.
41b Achieving Targeted Product Mix Using Optimization Tool for Chemical Plants with Multiple Products
Meiriño, M.
75a Offshore Units Safety Management Systems Analysis: Sgso x SEMS II
Melhem, G.
56n Retrograde and Phase Change (RPC) Flow Considerations for Relief and Flare Systems
57ax Dynamic Modeling of Inbreathing Requirements for Low-Pressure Storage Tanks
Mendenhall, J. D.
53aq Thermodynamic Parameter Regression Using Open Source Optimizers
Mentzer, R. A.
57bw Fundamental Research at Purdue Process Safety Research Center
Merenov, A.
130b Validation and Application of Process Models for Solving Problems in Chemical Processes
Meris, R.
57f The Jack Rabbit II 2015-2016 Chlorine Release Field Trial Experiments
Messersmith, D.
70a CFD Simulation of Various Flow Regimes in Two-Phase Gas-Liquid Flows
190a Value of Process Knowledge and Models in Data Analytics Applications
Metcalf, A.
139c Distillation: An Under-Plowed Field
Metulev, A.
142b PSM/RMP Modernization Programs in California - 2016 Developments and Correlation to Evolution at the Federal Level
Metzler, R.
36b Compressor Fouling Monitoring Methods Identify Changes in Fouling Mechanism to Direct Mitigation Performance Improvement
53ak Compressor Fouling Monitoring Methods Identify Fouling Mechanism Changes to Direct Mitigation Performance Improvement
Meyer, D.
61b Modeling Crude Units with Rigorously Calculated Preheat Trains
Mikuriya, T.
110c Hydrogen Storage and Transportation using SPERA Hydrogen Process for realizing Low-Carbon Society
Miller, D. S.
10a Fluid Report Quality Control and Characterization for the Avalon Shale in Permian Basin
Miller, D.
25b Hydrogen Jet Vapor Cloud Explosion:  a Model for Predicting Blast Size and Application to Risk Assessment
111b Quantifying the Mass Release Rate for Flashing Two Phase Releases for Consequence Assessment Purposes
143a Understanding vapor cloud explosions
Miller, J.
123b Lifecycle Analysis of Brazed Aluminum Plate Fin Heat Exchangers (BAHX)
Min, M.
137a New Approach to Using CFD Modeling for Chlorine Releases in Seoul
Mittal, A.
87c A Multi-Tier Approach for Steam Cracker Revenue Optimization
Mo, H.
36b Compressor Fouling Monitoring Methods Identify Changes in Fouling Mechanism to Direct Mitigation Performance Improvement
53ak Compressor Fouling Monitoring Methods Identify Fouling Mechanism Changes to Direct Mitigation Performance Improvement
Mohammad, R.
105c Modeling and Simulation for Flow Assurance in FCC-Cracked Gas Processing
Mohammad, S.
195a Quantification of the Effect of Viscosity on Point Efficiency of Sieve Trays in Distillation Columns
Mohedas, S.
99c Critical Parameters for Design, Troubleshooting and Optimization of an Etherification Process
Moncalvo, D. D.
125d Up-to-Date Engineering Solutions to Estimate and Minimize Thermal Breathing Losses from Storage Tanks
Montani, M. D.
34f On the Role of Proper Mist Elimination System for Distillation Tower Performance
Montgomery, R.
73b Automatic Control of Polymer Molecular Weight during Free Radical Polymerization
73c Automatic, Simultaneous Control of Polymer Composition and Molecular Weight during Copolymer Synthesis
Monti, F.
3a Cooling Water Injection and Monitoring System to Efficiently Prevent Fouling in Centrifugal Compressors
Moosemiller, M.
158c Don't Do What We Did - Stupidity, Luck, and Making Good Choices
Morenz, J.
164a Critical Leadership Moments
Morris, J. M.
57o Generalization of Modeling Along-Wind Dispersion
Morrison, D.
71c Understanding Tolerable Risk Criteria – Considering the Growth of LNG Transportation
72a A Case Study in Human Reliability - Analysis to Support LOPA in Unloading Hazardous Liquids
182a Waste Solvents to Trash Haulers: Lessons Learned from Hazardous Waste Accidents
Morrissy, S. A.
26b Development and Experimental Validation of Hydrate-Philic Surfactants
60e Reduction of Hydrate Film Growth Rate and Cohesive Force By Surface Active Components in Crude Oil
Mosca, G.
184d Upgrading a Lube Vacuum Tower
Moyne, J.
136b Big Data Analytics Applied to Semiconductor Manufacturing
Mueller, B.
34d Rigorous Troubleshooting Identified Crude and Vacuum Distillation Column Constraints
Mueller, C.
161e Silencing Hammering in a Flooded Condenser
Mukherjee, S.
111c Effectiveness of Water Sprays in Mitigating Toxic Releases
Munoz, A.
124b Improof: Integrated Model Guided Process Optimization of Steam Cracking Furnaces
Muñoz G., A. E.
36c Oxygen-Containing Contaminants and Steam Cracking: Understanding Their Impact Using COILSIM1D
109b Decision-Making and Optimization of Steam Crackers Using COILSIM1D
Munsil, J. M.
56m Finding and Presenting Latent Causes of Small Incidents and Near Misses
Murnen, H.
124d Olefin-Paraffin Separation with Customized Amorphous Fluoropolymer (CAF) Facilitated Transport Membranes
Murphy, J.
171a New Guidelines for Managing Asset (Mechanical) Integrity
Murphy, M.
57aw Model-Based Pressure Relief Design for Reactive Systems
Mustafa, M.
70d Improving Reliability of Multiphase Flow Metering with Thermodynamic Models and Correct Field Configuration
Myers, E.
92b Comparison Between Data-Driven and Physics-Based Models of a Tabletop Analog to an Oil-Water Field
Myers, T. J.
129b Ignitability of Combustible Dust Fueled Flash Fires with Industrial Ignition Sources
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z