Author Index: G

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Gai, H.
60c Effect of Sulfur Containing Compounds on Flame Characteristic and Contaminants Formation
Galiasso Tailleur, R. E.
59q Gas Liquid Solid High Pressure Separator Using Internal Hot Hydrogen Addition. Part I Experimental
Gandhi, M.
131b Designing an Effective Detection and Mitigation System for a Plant – Build on Facility Siting Study and QRA Investments
Gao, X.
55av Experimental Study of Electrostatic Hazard inside Scrubber Column Using Response Surface Methodology
GAO, Z.
58c Dynamic Performance of Flow Field in an Cylindrical Cyclone Separator
Garcia, A.
79c Debottlenecking Runtime of a Large Beer-Ethanol Column through a Fouling-Hydraulic Analysis and a Robust Equipment Design
119f Improving Mass Transfer and Hydraulic Performance of Random Packings By a Non-Traditional Approach
Garcia, C. Jr.
100a California Energy Commission Integrated Energy Policy Report
Garcia-Diaz, B.
179c Progress Toward Machine Learning Method for Corrosion Surveillance of Nuclear Materials Storage Containers
Garvin, T.
54l Finding Health & Safety Buried Treasure with AI
Garza, T.
120c Fitness-for -Service Steam Super Heater Coil
Gaspar, D. J.
16b Estimating Reid Vapor Pressure for Mixtures of Oxygenates Blended in a CA-Rbob
Gates, N.
171a Use of Nonlinear and Machine Learning Techniques for Improved APC Modeling
Gathright, P.
140a Trust As Currency
Gavin, S. D.
30a "Disciplina Total Incondicional". Como Reducir Incidentes Trabajando Con Indicadores Proactivos Tier-4
Gawura, G.
187e UOP High CondTM Tubes Debottleneck Fractionation Research Inc. (FRI) Condenser
Ge, S.
60b Sensitivity Study of Atmospheric Wind Speed on Ozone Pollution Impacted By a Chemical Plant Shutdown
Gebhard, E.
121c Improved Ethylene Heater Operation Using Real Time, in-Situ, Spatially-Resolved Combustion Measurements
Gebhard, S.
138b Heavy Oil Reforming
Geipel, C.
33e On the Random Packing Hydraulics for a Corrosive Application
190c Material Selection for Packed Columns in the Chlorine Drying Stage of the Chlor-Alkali Process
Geng, J.
17a Deflagrations By Design
Georgakis, C.
191b Minimizing Batch Cycle Time Using Evolutionary Design of Dynamic Experiments
George, A.
16b Estimating Reid Vapor Pressure for Mixtures of Oxygenates Blended in a CA-Rbob
Georgis, D.
48a Safer and Improved Process Design of LNG Plants Using Dynamic Simulation
Gertenbach, J.
187c A Design Solution to Feed Flow Maldistribution to Multiple Reboilers in Large Diameter Distillation Towers
Ghezzi, S.
5c Improved Coatings to Efficiently Prevent Fouling in Centrifugal Compressors
Ghezzi, S.
192d Olefins Plant Cracked Gas Compressor Fouling Tutorial
Gilke, S.
36d High Cycle Fatigue in Steam Turbines
Gipson, J.
57i Using Industry 4.0 to Create a Pathway to Operational Excellence
73a Using Big Data Techniques to Tackle Refining Reliability and Optimization
Gladyszewski, K.
193d Development of Packing Design for Distillation in Rotating Packed Beds
Glatz, D.
110a Processing with Solids in a Liquid-Liquid Extraction Column
Goda, A.
48a Safer and Improved Process Design of LNG Plants Using Dynamic Simulation
Goddard, A.
183f Hurricane Harvey 20 Months Later - Insights on the Arkema Crosby Flooding
Godfrey, J. C.
182a Theoretical Modeling of Mixing Quality and Axial Hold-up Distribution for Liquid-Liquid System in Agitated Flow Mixers
Goel, P.
57k Reinforcement Learning (RL) Based Data-Driven Decision Support System (Poster)
162a Alarm Management Using Data-Driven Methods
179a Reinforcement Learning (RL) Based Data-Driven Decision Support System
Goetz, W.
57g Business Value, Work Process, Analytics and Data in the Chemical Industry (Poster)
126a Business Value, Work Process, Analytics and Data in the Chemical Industry
Golding, D.
120b Case Study of High Pressure Steam Header Failure Rcfa
Gomez Suarez, E.
111c Molecular Composition Modelling of Vacuum Gas Oils Via a Molecular Reconstruction Approach
Gondolfe, J.
59s Dissolved Oil Removal from Ethylene Plants Quench Water
Gopaluni, B.
View Intelligent Processes: Leveraging the Data Revolution for Decision and Control
Górak, A.
193d Development of Packing Design for Distillation in Rotating Packed Beds
Gordon, M.
124c Natural Gas Decomposition and Separation of Solid Carbon and Hydrogen Products in High Temperature Molten Salts
Gorensek, M. B.
180b Modeling and Metrics Development for Biomass Pyrolysis Intensification Via Autothermal Operation
Gorimbo, J.
175b Fischer-Tropsch Synthesis: Product Distribution, Operating Conditions, Iron Catalyst Deactivation and Catalyst Speciation
Gorski, G.
9c Designing a Fluid Curtain System As an Independent Protection Layer
Graham, K.
131b Designing an Effective Detection and Mitigation System for a Plant – Build on Facility Siting Study and QRA Investments
Grant, K.
55bo Overcoming Motivational Biases in Hazops
68b The Influence of Cognitive and Motivational Biases While Establishing Consensus during a HAZOP
Grattan, D.
90b Accounting for Emergent Failure Paths in LOPA
Green, W. H.
56j GCxGC-Qms Analysis of Hexylbenzene Pyrolysis
Grubbe, PE, D. L.
85a Ethics As an Underpinning to Safety
85b Case Study Reviews in Ethical Failures Contributing to Process Safety Incidents
Guillaume, D.
146c Machine Learning Techniques Applied to Classical Product Properties
Gunduz, S.
56l Development of Alternative Materials to Replace Precious Metals in Sustainable Catalytic Technologies
Guo, M.
56g Nano-Scale Modifications Promote the Success in Industrial Scale: Catalytic Modified Oxygen Carriers for Advanced Fuel Combustion and Gasification System
Guo, M.
16a Techno-Economics of Catalytic Conversion of Ethanol to Chemical Grade n-Butanol and 1-Hexene
Guo, W.
167a Effect of Reheating on the Flowability of Waxy Crude Treated with Pour Point Depressant
Gustin, V.
56l Development of Alternative Materials to Replace Precious Metals in Sustainable Catalytic Technologies
Gye, H. R.
55p Flammable Gas Release Modeling for Real-Time Analysis Using Adversarial Variational Bayes
Gyorffy, M.
158f Kubota Cracking Tube Technologies
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z