Author Index: K

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Kalfrin, B.
36b Refrigeration Compressor Dry Gas Seal Panel Vent Header Design Consideration
36c Ethylene Product Pump Mechanical Seal Upgrade – Lessons Learned
Kalita, R.
193e Bottom Dividing Wall Column in a BTX Unit
Kamal, M. S.
59j Improved Oil Recovery with Viscoelastic Surfactant: Screening and Effectiveness of Formulations
59k Laboratory Investigation of Viscoelastic Surfactant for Chemical EOR in High Salinity and High Temperature Carbonate Reservoirs
Kamaz, M.
56u Pi Electron Cloud Mediated Separation of Aromatics Using Supported Ionic Liquid Membrane (SILM) Having Antibacterial Activity
Kan, Y.
55cn Analysis and Improvement of Safety Integrity Level Considering Human Factors
59a Application of GRAND and 2DGR Technique Method in Risk Assessment of Hydrogen Peroxide Production Process
Kanda, A.
193e Bottom Dividing Wall Column in a BTX Unit
Kang, D.
124c Natural Gas Decomposition and Separation of Solid Carbon and Hydrogen Products in High Temperature Molten Salts
Kang, M.
55bo Overcoming Motivational Biases in Hazops
68b The Influence of Cognitive and Motivational Biases While Establishing Consensus during a HAZOP
Kannan, P.
55c A Survey of Process Safety Workers' Attitudes, Behaviors, and Outcomes: Moving Beyond Human Error and Toward a Systems Model
70a Siri, How to Design a Procedure? Integration of Natural Language Processing in Procedure Design
Karbouj, O.
59l Optimizing Polymer Flooding in a Major Heavy Oil Carbonate Field in the Middle East
Karim, M. N.
84a Risk Analysis of Rare Events By Modified Hierarchical Bayesian Modeling (mHBM)
186c Monitoring Process Degradation through Operating Regime Based Process Monitoring
Karim, N.
186e Detection and Isolation of Abnormal Event in Nonlinear Industrial Processes By a Novel Data-Based Method
Karrs, M.
120e Overview of ASME PCC-2 Piping Repair Methods and Associated Novel Inspection Techniqu
Karwa, S.
156a Soft Skills for Young Professionals
Kas, PE, K. A.
147c Using Unmanned Aerial Vehicles and Robotics in Hazardous Locations Safely
Kasat, G.
82b Efficient Use of Computational Model Data Via "Zonal" Modeling
Kaur, H.
81a Investigating Liquid Mixture Adsorption Equilibria Using Adsorption NRTL Model
Kawatra, S. K.
110c Laboratory, Pilot, and Plant Scale Studies in CO2 Scrubbing
Kazarians, M.
54o LOPA Exemptions: When and Where
55g Practical Notes on Ragagep Compliance
Kazi, M. K.
55r Application of Inherently Safer Design Tool (i-SDT) for Hazards Assessment and Safer Operation
Keeley, C.
143c Semi-Continuous Processing to Improve Safety and Quality
Keller, A.
140c AFPM/API Advancing Process Safety: Reevaluating the Permit to Work Process through the Human Reliability Lens
Keller, T.
63b Demonstrating Sandwich Packing Performance in Butadiene Extraction Units
Kelly, J. D.
41b Closed-Loop PID Re-Tuning in a Digital Twin By Re-Playing Past Setpoint and Load Disturbance Data
Kenyon, B.
143c Semi-Continuous Processing to Improve Safety and Quality
Kerin, T.
183c Taming the Wild River Rapids – How Process Safety Can Apply Outside the Process Industries
Khalaf, M.
150b Magnetic Treatment of Asphaltenic Oils
Khamphasith, M.
79g Measurements and Simulations of Natural Gas Separation Performance for a Pilot-Scale, High-Pressure, Cryogenic Scrub Column Fitted with Oldershaw Trays
Khan, M. S.
185e Operations Improvement in LNG Re-Gasification Terminal through Corrected Storage Tank Model
Khan, M.
82b Efficient Use of Computational Model Data Via "Zonal" Modeling
Khanlari, A.
35b Troubleshooting Fouling with a Deposit's Color, Texture, Location
Khogeer, A.
173b The Journey Towards 2030, Are We There Yet? An Impact of 2030 Vision and 2020 Transformation Program on Energy, Infrastructure and Other Projects in the Region
Kiihne, G.
183e Explosion at BASF Ludwigshafen - Findings and Lessons Learned
Kikkawa, Y.
69d Liquefaction Technology Selection for Mid-Scale LNG Plants
185a Jetty Bog Recovery
Kim, C. W.
160a Forecasting of Major Incidents Based on Big Data of Near Misses and Minor Incidents: Heinrich's Vs. Deep Learning
Kim, K.
169a Capacity Building of Risk Communication with the Local Community in RMP (risk management plan)
Kim, S. H.
145a Data-Assisted Optimization
Kim, T.
124a Rational Screening of Adsorbents for Natural Gas Upgrading By Pressure Swing Adsorption Using Dynamic Simulation of Process Performance Metrics
170c Modelling of Gas Separations By Pressure Swing Adsorption Using a Novel Steady-State Methodology
Kim, W.
23b Influence of Batchelor Flow on Agglomeration of NMC Hydroxide
Kim, Y.
41a Development of a Chemical Accident Response Scenario for Central Accidents Headquarters in Korea
Kimball, B.
100b Effects of Elevated CO2 Concentrations on Yields of Agricultural Crops
Kimbleton, S.
54l Finding Health & Safety Buried Treasure with AI
King, G.
139c The Day I Got a Second Chance
King, R.
92a High Temperature Hydrogen Attack - What Is It? What Is Industry Doing about It?
188b Reduced Toughness Fittings and Potential Effect on Low-Temperature Fitness for Service
188c Reduced Toughness Fittings and Potential Effect on Low-Temperature Fitness for Service - Part 2
Kirkes, T.
40b Estimating the Thermophysical Properties of Black Liquor from Kraft Pulping
124a Rational Screening of Adsorbents for Natural Gas Upgrading By Pressure Swing Adsorption Using Dynamic Simulation of Process Performance Metrics
170c Modelling of Gas Separations By Pressure Swing Adsorption Using a Novel Steady-State Methodology
189b Thermodynamic Modeling of Lithium Salts with the Electrolyte NRTL Model Using Hydration Chemistry
Kirkpatrick, R. D.
33b A Practical and Cost-Effective Solution to Monitor Product Recovery Rate in High Purity Side Draw Distillation Columns: An Industrial Methanol Distillation Case Study
Kister, A. A.
119d Gaining Insights into Parting Box Hydraulics
Kister, H.
119d Gaining Insights into Parting Box Hydraulics
159g Diagnosis Key to Rectification of Premature Flood and Instability in a Debutanizer Tower
187a Stable Thermosiphon Reboiler Operation: With or without a Valve in the Inlet Piping?
187c A Design Solution to Feed Flow Maldistribution to Multiple Reboilers in Large Diameter Distillation Towers
187g Troubleshooting a Thermosiphon Reboiler - Why New Is Not Always Better Than Old
Kister, J.
94b Lessons Learned from a Dust Hazard Analysis at a Joint Venture Site in China
Klein, H.
119g Numerical Simulation of Two-Phase Flow and Interfacial Species Transfer in Structured Packings
Knight, C.
120c Fitness-for -Service Steam Super Heater Coil
Knight, G. R.
114c Beyond VCE: Addressing Fire Hazards As Part of Facility Siting
Knis, M.
192f Insoluble Polymer Fouling in CGC Systems
Ko, Y.
160a Forecasting of Major Incidents Based on Big Data of Near Misses and Minor Incidents: Heinrich's Vs. Deep Learning
Kolodji, B.
20a Direct Air Capture with Membranes for Crop Carbon Enrichment
127a A Practical System for Enrichment of CO2 in Ambient Air for Commercial Agriculture
127b Profit from Flue Gas to Increase Crop Yields
Komplin, G.
71a Best Practices for Managing Safety during the Design Phase of Pilot Plants
92c Best Practices for Managing Safety during the Commissioning and Start-up Phases of Pilot Plants
Kooijman, H.
119c Simulating Maldistribution in Packed Columns
Kosch, M.
8a Using Process Safety Tools to Find and Sell an Inherently Safer Design: A Case Study
Koswara, A.
61a Minipharm: A Miniaturized Pharmaceutical Manufacturing Platform for Process Development
Koyanagi, S.
151c Improvement of Piping Integrity Management with Advanced Technology
Koziol, A.
67c Investigation of a Polymeric Resin Deflagration Using Advanced Calorimetric Techniques
Kraume, M.
65a Determination of Effective Transport Parameters from Particle-Resolved CFD Simulations for a Simplified Fixed-Bed Reactor Modeling
Kroner, G.
120d Transferline Exchanger Internal Diameter Tube Inspection
Krumpolc, T.
43c Using Process Simulators to Quantify Flashing Two Phase Release Conditions
Krzysik, K.
143c Semi-Continuous Processing to Improve Safety and Quality
Kueh, B.
88a Incorporating Process Safety throughout the Lifecycle of Major Capital Projects
Kulkarni, J.
131c The Good, the Bad and the Ugly- Importance of Management of Change (MOC) in Building Siting
Kumar, A.
56o Effects of Anaerobic Environment in Water Quality Downgradient of a Mulch Biowall
Kumar, P.
82a Using Machine Learning to Develop Deeper Understanding of Agitated Filter Dryer
Kumar, V.
181b An Integrated Urban PLAN for CO-Developing OIL & Gas Fields
Kumari, P.
84a Risk Analysis of Rare Events By Modified Hierarchical Bayesian Modeling (mHBM)
Kummari, S. R.
188d Current Deficiencies and Proposed Modifications to API 579 Part 3 Brittle Fracture Screening Procedures
Kundu, S.
59b Double Network Hydrogel from Acrylic Acid
Kunt, T.
161a Conducting Quality Process Safety Management Audits - Globally
Kurle, Y.
185d Optimal Operation for LNG Multiple Ship Tanks Commissioning and Uploading Via Rigorous Dynamic Simulations
Kurukchi, S.
59aj Green Oil Removal from Ethylene Plant Backend Hydrogenation Unit
59s Dissolved Oil Removal from Ethylene Plants Quench Water
Kusmierz, A.
55bk Overview of Hazards Presented By the Renewed Focus on Use of Flammable Refrigerants
Kuzeljevic, Z.
170a A Tale of Two Columns: Integrating Dynamic Simulation in Conceptual Design
Kwon, H.
41a Development of a Chemical Accident Response Scenario for Central Accidents Headquarters in Korea
Kytomaa, H.
7a Analysis of Risk Due to Compound Extreme Events
7b A Non-Stationary Approach to Conducting Site-Specific Integrative Risk Management Assessments at Industrial Facilities at Risk from Extreme Weather Events
138a Impact of Time on Asphaltene Destabilization Detection in Unconventional Fuels
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z