13 Agglomeration and Granulation Processes


Description:
This session seeks papers covering all aspects of Agglomeration and Granulation Processes, i.e., the process of forming larger granules from fine particles with or without the use of a binder; this includes wet-and melt-granulation, mixer-granulation, fluid bed granulation and coating and compaction under pressure. Papers are requested on theoretical, computer modeling and experimental research performed on the above systems; this includes fundamental physical and chemical aspects of agglomeration on granular, unit operation dynamics (e.g., flow and stress fields), system integration, scale-up and process control.

Sponsor:
Particle Production and Characterization


Chair:
Jim Michaels
University of Delaware

Email: michaeja@udel.edu

Co-Chair:
Mehrdad Kheiripour
Research Associate
City College of CUNY
Chemical Engineering
160 Convent Avenue
New York, NY
10031
Email: mehrdad.kheiripour@merck.com


Papers:
13c
Single Drop Impact on Heterogeneous Powder Beds through Granule Formation Mechanisms, Drop Penetration Time, and Granule Morphology and Structure
Tianxiang Gao, Arizona State University; Arun Sundar S. Singaravelu, Arizona State University; Nikhilesh Chawla, Arizona State University; Heather N. Emady, Arizona State University
13b
Development of an Inline Measurement Tool for Particle Size and –Shape Analysis during the Granulation Process
Maria Niesing, TU Dortmund; Dominik Weis, University of Kaiserslautern; Sergiy Antonyuk, University of Kaiserslautern; Markus Thommes, TU Dortmund University
13a
Surface Velocity Measurements of a Powder Bed in a High Shear Wet Granulator Using High Speed Video Analysis
Patrick Wray, Bristol-Myers Squibb; John Jones, Bristol-Myers Squibb; Peter Ferrie, Bristol-Myers Squibb; Jay Poorna Reddy, Bristol-Myers Squibb; Preetanshu Pandey, Bristol-Myers Squibb; Stuart Charlton, Bristol-Myers Squibb; Andrew Dennis, Bristol-Myers Squibb
13d
DEM Investigation on the Dynamics of Singlet-Doublet Collisions of Cohesive Particles
Peiyuan Liu, University of Colorado at Boulder; Kevin M. Kellogg, University of Colorado at Boulder; Casey Q. LaMarche, University of Colorado at Boulder; Christine M. Hrenya, University of Colorado at Boulder
13e
Interval Type-2 Fuzzy Predictive Modelling for a High Shear Granulation Process
Wafa' H. AlAlaween, The University of Sheffield; Mahdi Mahfouf, The University of Sheffield; Agba Salman, University of Sheffield
13f
Experimental Investigation and Modelling of the Deformation Behavior of Pharmaceutical Pellets As a Basis for DEM Simulations of the Spheronization Process
Dominik Weis, University of Kaiserslautern; Maria Niesing, TU Dortmund; Markus Thommes, TU Dortmund University; Sergiy Antonyuk, University of Kaiserslautern
13g
A Mechanistic Model for Granule Breakage in Twin Screw Granulation
Shankali U. Pradhan, Purdue University; Jiayu Li, Purdue University; James D. Litster, The University of Sheffield; Carl R. Wassgren, Purdue University
13h
Experimental Investigation of a Dry Slag Granulation Unit Using a Rotating Disc
P.C. Seshasai, Indian Institute of Technology, Madras; Y. Eswararao, Indian Institute of Technology, Madras; S. Pushpavanam, Indian Institute of Technology, Madras; T. Renganathan, Indian Institute of Technology Madras
Abstract Submissions Closed
See more of this Group/Topical: Particle Technology Forum