594a
Optimization of Chromatographic Separation for Production of Bioethanol From Lignocellulose by Concentrated Acid Hydrolysis
673e
Inferring Fuel-Rich Toluene Flame Chemistry From Photo-Ionization MBMS Analysis and Modeling
185d
Secretory Pathway Analysis of High Productivity in Mammalian Cell Culture through Genomics and Proteomics
281e
On the Use of V-LES as An Alternative to LES for Industrial Turbulent Flows
236f
Design of High-Throughput Synthesis Experiments with a Novel Distributed Algorithm Using Grids and Knowledge-Based Optimization
456d
Study of Cobalt Surface and Crystal Defect Behavior Using a Reactive Force Field (ReaxFF)
65aa
Carbon Nanotube Based Tunable Microbattery
329e
Using Simulators to Teach Process Safety
538d
Ranking Energy Efficiency of UAB Buildings and Quantitative Determination of Heat Transfer Reduction From Setback Schemes
218b
A Numerical Method for Optimizing Oxyfuel Power Plants
29d
Electrostatic Charging in Fluidized Beds
584f
Experimental Study of the Dynamic Mechanical Properties of Vapor-Grown Carbon Nanofiber/Vinyl Ester Nanocomposites Fabricated Using Coupled High-Shear Mixing and Ultrasonication Techniques
652e
Crystallization Processes for Energetic Materials
76b
Effects of Enzyme Loading and β-Glucosidase On Enzymatic Hydrolysis of Switchgrass Processed by Leading Pretreatment Technologies
76e
Comparative Study On Enzymatic Digestibility of Upland and Lowland Switchgrass Varieties Processed by Leading Pretreatment Technologies
597b
Synthesis and Biophysical Analysis of Small Molecule Antagonists of Toxic Protein Aggregation
695a
Density and Speed of Sound Measurements of Second-Generation Biofuels
342b
Fluorescent Zdye Platform for Differential Covalent Labeling of Proteins for 2D and 1D Gel Analysis
493n
Laboratory SWAXS for Applications in Pharmaceutical Technology
131c
Synthetic Red Blood Cells for Drug Delivery Applications
500c
Electrohydrodynamic Co-Jetting: A Design Platform for Multifunctional Structures for Drug Delivery and Tissue Engineering Applications
601e
Spatially Controlled Surface Modification Using Reactive CVD Polymers
624a
Structurally Controlled Bio-Hybrid Materials Based On Unidirectional Association of Anisotropic Microparticles with Human Endothelial Cells
684f
Multicompartmental Microfibre Scaffolds
532d
Surface Dynamics of Branched Polystyrene Melts
7a
Facilities for X-Ray Microscopy and Imaging at the Advanced Photon Source
430e
Impact of Scale On Wet Mill Performance
625d
Modeling of Transient Concentration for Slow Growing Conformational Polymorphs During Batch Crystallization
395c
Oriented Matrices of Collagen for Directed Cellular Growth
369b
Investigation of Mass Transfer During Membrane Formation – a Route Leads to Insight of Membrane Morphology Control
464g
Microfluidic Formation of Ionically Crosslinked Polyamine Gels
190e
DNA Microarrays Formed by Microquill Guided Attachment to Chemically Synthesized Oligonucleotide Surfaces
550d
Real Time Detection of DNA Hybridization and Melting On Spotted Oligonucleotide Arrays by Total Internal Reflection Fluorescence
619a
Magnetically Driven Mixing within a Microarray Geometry Using Functionalized Magnetic Nanoparticles
2h
Development of Rhodobacter Sphaeroides for the Production of Functional Membrane Proteins
381g
Directed Evolution and Structural Characterization of A Simvastatin Synthase
423d
Short-Term Scheduling in Multi-Stage Batch Plants through Lagrangean Decomposition
385e
Supply Chain Design Considering Operational Level Details
74d
Parallel Solution of Large-Scale Nonlinear Programming Problems On Modern Computing Architectures
129a
A New Approach for Facility Siting by Mapping Risks On a Plant Area Grid and Optimization
212g
Optimal Load Scheduling for Efficient Operation of Air Separation Systems Under Uncertain Costs and Demands
373f
Improved Estimation and Control for Large-Scale Models of Infectious Disease Spread
264g
On the Selection of Input-Output Pairs to Achieve Global Stability of Nonlinear Process Systems
485bo
Adaptive Glucose Feeding for An E. Coli Recombinant Production Process
485bn
Clone Selection in Chemically Defined Media for a CHO MAb Process
162d
RANS and LES of Single and Multiphase Flows Using the Immersed Surface Technology Combined with Block Mesh Refinement (IST/BMR)
162e
Predicting Turbulent Flows Using the Immersed Surface Technology Combined with Block Mesh Refinement (IST/BMR)
281e
On the Use of V-LES as An Alternative to LES for Industrial Turbulent Flows
626d
Workflow for the Design of Seeding Application in Batch Crystallization
311a
The Common Model Environment – An Implementation of Model-Centricity in Refinery Planning, Scheduling, and Process Engineering
488k
Amphiphilic Block Copolymer Self-Assembly in Solvent Mixtures: Solvent Quality Effects On Formation and Structure of Micelles and Lyotropic Liquid Crystals
383d
Structural Studies of Mixtures of Colloidal Semi-Flexible Rods (polyelectrolyte-surfactant aggregates) and Spheres
412a
A Novel Approach and System for Rapid Field Evaluation of Water Desalination
511c
Evaluation of a Centrifugation Scale-Down System for Bench-Scale Process Development
361c
Cratering of a Particle Bed by a Turbulent Subsonic Jet
80d
Catalytic Deoxygenation of Free Fatty Acids Over Pd/C
136c
Mercury-Nitrite-Rhodium-Ruthenium Interactions in Noble Metal Catalyzed Hydrogen Generation From Formic Acid During Nuclear Waste Processing at the Savannah River Site
136b
Characterization of Individual Chemical Reactions Consuming Acid During Nuclear Waste Processing at the Savannah River Site
205e
Successes and Emerging Issues in Simulating the Processing Behavior of Liquid-Particle Nuclear Waste Slurries at the Savannah River Site
211b
Successes and Emerging Issues in Simulating the Mixing Behavior of Liquid-Particle Nuclear Waste Slurries at the Savannah River Site
626g
Synthesis of Non-Radioactive Slurries to Simulate the Processing Behavior of Particles in Radioactive Waste Slurries
517f
Computational Exploration of Metal Complexes for Stress-Strain Modulation
430f
Qualification of a Scale Down Cell Culture Model for Process Characterization Studies
300g
Diffuse-Interface Modeling of Phase Segregation in Amphiphilic Liquid Mixtures
42e
Hydrogen Storage in Li-Doped 3D Covalent Organic Borosilicate Framework
610g
Types, Spatial Distribution, Stability, and Performance Impact of Sulfur On a Lean NOx Trap Catalyst
469d
Hydrogen Production by Sulphur Iodine Cycle Fed by Solar Energy: Realization of a Laboratory Plant and Possible Spin-off On the Industrial Field
551g
Optimizing the Synthesis of Carbon Nanotube Fibers Utilizing Biocompatiable Components
581f
Thin Film Lubrication Based On PDMS Networks
5cw
Bone Tissue Growth Mechanism Fundamentals Via Fluid Shear and Nutrient Transport Simulation in 3D Porous Scaffolds Cultured in a Perfusion Bioreactor
55f
Understanding the Tissue Growth Process Via Fluid Shear and Nutrient Transport Simulation in 3D Porous Scaffolds Used in a Perfusion Bioreactor
148b
A Lagrangian Particle Method as An Alternative to Solute Lattice Boltzmann: Investigation of Mass Transfer in Biological Porous Media
485u
Insight Into Tissue Growth Process Via Local Shear Stress and Nutrient Transport Simulation in 3D Porous Scaffolds Cultured in a Perfusion Bioreactor
298g
Particle-Size and Chain-Length Effects On Forces Between Functionalized Silica Nanoparticles
576d
Nanomanufacturing of Ordered Plasmonic Nanostructures: Effect of Metal-Substrate Interactions
110e
Effects of Processing Conditions On Properties of Poly(arylene ether sulfone) Films for Polymer Electrolyte Membrane Applications
489v
Are Circulating Tumor Cells Present in the Peripheral Blood of Cancer Patients Cancer Stem Cells?
343f
Estimation of Powder Blend Particle Size Distribution and Flow Properties From Single Components
115c
The Intermittent Simulated Moving Bed (I-SMB) Process
314i
Acoustically-Driven Programmable Liquid Motion Using Resonance Cavities
257g
Surface-Mediated Release of siRNA From Polyelectrolyte Multilayers Fabricated Using Degradable Polyamines
557e
Application of the Aqueous Porous Pathway Model to Validate the Ιn Vitro Split-Thickness Skin Model for Ultrasound/Surfactant-Enhanced Transdermal Drug Delivery
645c
Binary Combinations of Lipid-Like Materials for siRNA Delivery
646c
Comparison of Ionically and Novel Covalently Crosslinked Alginate Microspheres
439c
Co-Solvent Assisted Spray Pyrolysis for the Preparation of Metal Microparticles
208a
Integration of Electroporation-Based Gene Transfection and Nanofiber-Based Cell Culture for Embryonic Stem Cells
217f
The Extrusion of a Model Yield Stress Fluid Imaged by MRI Velocimetry
674c
Control of C2-Hydrocarbon Formation in the Supercritical Water Reformation of Jet Fuel
272d
Tunable Composite Membranes
72a
Concentration and Separation of DNA Employing Insulator-Based Dielectrophoresis and DC Electric Fields
240f
Dielectrophoretic Fractionation of a Mixture of Bacteria and Yeast
306g
Insulator-Based Dielectrophoresis with Direct Current Electric Fields
334b
Viable and Non Viable Microalgae Fractionation Employing Insulator-Based Dielectrophoresis
334g
Particle Manipulation Employing Alternating Current Electric Fields in An Array of Insulators
441c
DC Dielectrophoresis: Separation of Fluorescent Polystyrene Particles
441b
Dielectrophoretic Manipulation of Liver Cancer Cells
390f
Evaluation of Cellulose Reactivity with CBH1 and/or EG2 During Hydrolysis
571e
Novel Design for a Magnesium-Enhanced Lime Ex-Situ Gypsum Oxidizer
489i
Viscoelastic Measurements of Biocompatible Polyelectrolyte Multilayers
405b
High Temperature Solid-Oxide Electrolyzer 2500 Hour Test Results at the Idaho National Laboratory
221a
R&D Management Workshop
62ba
Bioreactor Design for Plant Propagation
307c
Stability and Interfacial Structure of Pickering Emulsions Stabilized by Nanoparticles
232i
Analysis of Structures Formed by Application of Step Strain to Dense Colloidal Suspensions
300a
Simulation of Particles with Anisotropic Rigidity in Shear Flow Using a Minimal Bead-Spring Model
574d
Molecular Dynamics Simulations of Complex Formation Between Poly(styrene sulfonate) and Poly(allylamine hydrochloride), and Poly(acrylic acid) and Poly(allylamine hydrochloride)
672c
Modeling the Buildup of Exponentially Growing Polyelectrolyte Multilayer Films
488al
Tritium Effects On Electrically Conducting Polymers for Sensor Applications
226a
Reimagining Agriculture to Accommodate Large Scale Energy Production
61b
Producing Clean Water for the Thai Village of Nong Bua
694a
Design of Recombinant Human Collagen and Collagen-Based Variants
63j
Identification of Dominant Mechanisms for Capacity Fade of Lithium-Ion Batteries
519a
Synthesis, Colloidal Stability, and Magnetic Properties of Nanoparticles for Magnetic Fluid Hyperthermia
566a
Effects of Nanoparticle Properties On Cellullar Uptake and Magnetic Fluid Hyperthermia
198g
Experimental Investigation of Breakage of DLCA Colloidal Aggregates in Shear and Elongational Flows
304a
Breakage of Colloidal Aggregates in Shear Flow
431f
Monte-Carlo and Brownian Dynamic Simulaitons of Self-Assembly and Gelation of Magnetic Particles IN the PRESENCE of A Magnetic Field
450a
Rheology of Dilute Suspensions of Fractal Clusters with Arbitrary Structure
567b
Magnetic Gelation
685g
Design of Polymer Hydrogels Used as Support Material for Compliance-Induced Differentiation of Stem Cells
493q
Alginate-Chitosan-Alginate Microcapsules for Oral Administration
514d
Correlation of H2 Heat of Adsorption and Ethylene Hydrogenation for Re@Pd Overlayer Catalysts
305f
Kinetic Monte Carlo Simulation of the Interfacial Electrochemistry in a Hydrogen-Powered Solid-Oxide Fuel Cell
664g
Optimization and Data Driven Strategies for Robust Treatment Planning of Cancer Dendritic Cell-Interleukin Therapy
592f
Fermentation and Nutrient Characterization of Hydrolysate From AFEX-Pretreated Corn Stover
162a
A General Method for Accurate Size Determination From 2-D Images
187e
Liquid and Solids Entrainments in Slurry Bubble Columns
187g
Cultivation of Microalgae Using Draft-Tube Bioreactor
276b
Effect of Carrier Morphology On Drug Loading and in Vitro Aerosolization and Deposition Properties in Dry Powder Inhalation
615d
Effect of Fine Particles in the Formulation with Pollen-Shape Drug Carriers for Dry Powder Inhalation
246a
Modulating Layer-by-Layer Assembly of Oppositely Charged Nanoparticles Using Amphiphilic Molecules
636e
Optimal Induction of Saccharomyces Cerevisiae for Enhanced Metabolite Production in Batch Culture
5bw
Biomaterial Platforms to Investigate the Fundamentals of Cell Migration
170e
Mesenchymal Stem Cell Motility in 3D Hydrogel Scaffolds
225b
Polyelectrolyte Brush Behavior in the Presence of Ruthenium Hexamine
648e
Addressing HiPco Single-Walled Carbon Nanotube Bundles with Optically Patterned Virtual-Electrodes
282e
Regenerative Engineering: The Integration of Technologies for Tissue Regeneration
418e
Information-Theoretic Approach to the Characterization of Tether-Bond Dissociation Kinetics
139e
Investigation of the Catalytically Active Site in Oxidation Catalysis by Gold: Insights From First Principles
254e
Electrocatalytic Hydrogenation of Triglycerides Using Transition Metal Carbide Based Catalysts
163b
Complex Flows of Cellulosic Fiber Suspensions Visualized Using Magnetic Resonance Imaging
281a
Inertial Particle Acceleration Statistics in near-Wall Turbulence
469c
Heat Pump Cycles to Generate Electricity From Low Temperature Waste Heat
666e
Multiscale Modelling of a Typical Industrial Oxidation Reactor for Terephthalic Acid Production Via a Hybrid Multizonal-CFD Approach
232d
Hydrophobicity Effect On Gas-Liquid Mass Transfer in Microchannels
485bi
The Effects of Cryopreservation On a Tissue Engineered Pancreatic Substitute
500d
Breath Figure Thin Films of Biodegradable Polymers for Controlled Antibiotic Release
5bc
Rational Design of Advanced Materials: Combining Modeling, Synthesis, Processing, and Characterization to Generate Superior Materials
207g
Modifying Properties of Polymer Nanostructure through Liquid Phase Reactive Treatments
573e
Mesoscale Kinetic Monte Carlo Simulations of Molecular Glass Photoresists
581b
Mechanical Properties of Polymer Thin Films and Nanostructures
628e
In-Situ Control of Cationic Polymerization Kinetics for Negative Tone Photoresists
651d
Diffusion and Mass Uptake Behavior of Polymer Thin and Ultra-Thin Films
459a
Fouling of Reverse Osmosis and Forward Osmosis Membranes by Humic Acid – Similarities and Differences
485aj
Exploring Conformational Changes and Folding for a Model GPCR Using Biophysical Techniques
381d
Targeting the Vasculature of Solid Tumors with Enzyme/Prodrug and Methionine-Depletion Therapy
422d
Large Time Scale Conformation and Phase Transition Dynamics
244b
Statistical Quantification and Characterization of Material Properties Influencing the Reactivity of Activated Carbons
515c
CFD Prediction of Uranium Tetrafluoride Particle Fluorination in Fluidized Bed Pilot
642a
Engineering Gene Expression Dynamics of Mammalian Cells in Culture
405d
High Temperature Steam Electrolysis for Hydrogen Production: From Materials Development to Stack Operation
338p
High Pressure Flow Mixing Calorimetry for the Investigation of CO2 Capture in Amine Solutions
329b
Development of Classroom Experiments to Introduce Decision Making Under Uncertainty to Students in a Design I Course
472a
An Empirical Model for Crude Distillation Units in Petroleum Refinery Planning
5dg
Hydrolytically Degradable Poly(ethylene glycol) Hydrogel as a Tunable Scaffold for Neural Tissue Engineering
8c
Probing Hydrogel Transport Properties and Dynamic Micro-Structure with Fluorescence Correlation Spectroscopy
15a
Application of a Novel Neural Tissue Scaffold to Quantitatively Correlate the Dynamics of Polymer Structure and Neurobiological Function
647c
Fluorescent Oxygen-Sensing Microparticles for Estimating Oxygen Diffusivity and Mapping Oxygen Concentration Profiles within 3D Hydrogel Scaffolds
597a
Seeded Growth of Beta-Amyloid Fibrils From Alzheimer's Brain–Derived Fibrils Produces a Distinct Fibril Structure
293c
Fiber Optic Enzymatic Biosensor Array for Measurement of Halogenated Hydrocarbon Mixtures Using a Chemometric Approach
660f
Bifunctional SAMs as Templates for Microfluidic Screening Arrays
585b
Application of Modeling to Scale-up Liquid Mixing Processes
670e
Multi-Technique Microscopy Use for Identification of Active Sites in Supported Catalysts
84c
Investigation of the Carbon Nanotube Interfacial Tailoring Effects On the Mechanical and Viscoelastic Properties of Carbon Nanotube Epoxy Nanocomposites
580f
Comprehensive Study On Gas / Crude Oil / Water Separation - Experimental and Numerical Analysis
459a
Fouling of Reverse Osmosis and Forward Osmosis Membranes by Humic Acid – Similarities and Differences
267d
Utilization of Reburning Reactions for NOx Control in Oxy-Fuel Combustion
11a
An Experimental Investigation of Nucleation Phenomenon in a Static Powder Bed
595g
Hollow Fibers by Electrospinning in Supercritical CO2
420d
In Situ Catalytic Monitoring On Pt-Vanadia Nano Systems
341b
Laboratory Measurements of Cloud Condensation Nuclei Activation, Volatility and Growth Kinetics
516c
The Effects of Space Time Upon the Supercritical Water Reformation of Glycerol
14c
Sustainable Bio-Based Green-Composites for Automotive Interior Parts
188b
Effects of Varying Water-to-Glycerin Molar Ratio for Supercritical Water Reformation of Glycerin
180p
Measurement of Bubble Points of CO2 in Ionic Liquids, [BMP][Tfo]and [P14,6,6,6][Tf2N] Using Variable-Volume View Cell
383g
Confinement Effects On the Self-Assembly of Organogels
622c
Separating Carbon Nanotubes: Connecting Single Molecule Electrical Measurements to Ensemble Spectroscopic Properties
115d
“Recycling Partial-Discard” Strategy for High Purity Separation
244d
High Pressure Adsorption of CO2 On Dry and Wet Coals
338h
2-Layered-Bed H2 PSA Process for Low H2 Feed Gas
338i
Li-Modified Mesoporous Silica Adsorbents for Adsorptive/Regenerative Denitrogenation of Raw Diesel Fuel
338t
Application of “FeedCol” Strategy in Various SMB Configurations
709d
CO2/CH4 Separation Using Adsorbent/Membrane Hybrid System
5bd
Development of Novel Water-Soluble Gold Nanoparticles with Atypical Fluorescence and Study On Its Mechanism
337t
Enhanced Emission of Gold Nanoparticles with Atypical Electron Transfer From Surface Bound Molecules to Gold Surface
419a
Enhanced Emission of Gold Nanoparticles Due to Electron Transfer From Surface Bound Molecules and Its Use in pH Sensing
425b
Process Design of Wastewater Treatment Plants for Textile Effluents
338h
2-Layered-Bed H2 PSA Process for Low H2 Feed Gas
490d
Fractionation and Bioconversion of Micro-Algae Into Bioethanol
287e
Direct Contact Membrane Distillation with Hollow Fiber Membranes: Studies On Scaling, Antiscalants and Countercurrent Cascades
659b
Development of Carbon Molecular-Sieve Membranes with Tunable Properties
5be
Multiscale Simulations of Peptides, Nanoparticles, Polymers, and Membranes for Drug Delivery and Nanopore Applications
102f
Molecular Dynamics Studies of Polyethylene Oxide and Polyethylene Glycol Using All-Atom and Coarse-Grained Models : Conformation, Hydrodynamics, and Biophysical Applications
306f
Pressure Measurement in Microsystems Using Volume-Displacement of Nanoparticle Suspension
666a
Homogeneous Liquid Phase Epoxidation of Light Olefins: Mass Transfer Investigations
664a
Advances in Control Algorithms for Blood Glucose Regulation in the Intensive Care Unit (ICU)
568a
A Simple Method for the Fabrication of b-Oriented MFI Silicalite-1 Membranes with Controlled Grain Boundary Structure
224a
Polymorph Control of Nanosized Organic Molecular Crystals On the Engineered Surfaces
303e
Lecithin as An Antistatic Agent for Pure API Crystallizations in Organic Solvents
179i
Enhanced Kinetics of CO2 Enclathration with a Mixed Organic Layer
256a
Surfactant Adsorption On Structure II and Semi-Clathrate Hydrates
366f
Inhibition Effect of Various Surfactants On CO2 Hydrate Formation
407d
DataNet Opportunities for Process Systems and Chemical Engineering
661b
Molecular Dynamics Simulations of WATER Cavity Distortion for Determining Clathrate Hydrate Equilibria
566c
Magnetic Nanoparticle-Triggered Liposomal Drug Delivery for Cancer Imaging and Treatment
532d
Surface Dynamics of Branched Polystyrene Melts
713f
Biocompatible and Electroactive Polymers
319a
Proposal Writing Tutorial
364c
Conversion of Alaskan Natural Gas to a Liquid Fuel Using Microchanne Reqactor/Heat-Exchangersl
508b
Hierarchical Bayesian Approach to Decision-Oriented Experiment Design and Evaluation for Selection Among R&D Alternatives
74a
MILP Based Value Backups to Solve POMDPs with Large or Continuous Action Spaces
374f
Identification of Gene Networks: Characterization of the Problem and Assessment of the Tools
389e
Use of Post-Decision-State Value Function for Control of Constrained Stochastic Systems
481a
Simultaneous Infrastructure Investment and Operation Decisions for Bio-Refinery Networks
507c
Multivariate Statistical Analysis of X-Ray Spectra From Cellulose: A New Method to Determine Degree of Crystallinity and Predict Hydrolysis Rates
486s
Dynamic Modeling and Control of An Industrial Multistage Flash Desalination System
486r
Dynamic Simulation for the Production of Dimethyl Ether From Natural Gas
494k
Chaotic Operation of a Small Tank pH System for the Identification of Titration Curve
474e
Cell-Free Production of Nona-Arginine Transcription Factor Fusion Proteins for Non-Viral Modulation of Gene Expression
75e
Highly Aligned Cellulose Nanowhisker Reinforced PVA Nanofiber Webs Via Electronspinning Method
702d
Improving Oxygen Reduction Efficiency in Direct Methanol Fuel Cells through Structured Catalyst Design
487p
Biodiesel Production From Acid Oil (Dark Oil) Containing High Free Fatty Acid Via Solid Acid Catalyst
130d
Extrusion Foaming of Cellulose Fiber Reinforced Polypropylene Composites
84d
Controlling Interfaces in Mixed-Matrix Membranes by Solvothermal Deposition of Inorganic Nanostructures On Zeolite Crystals
171a
Assessment of Freshwater Requirements and Conservation Options for the Production of Lignocellulosic and Algal Biofuels and Thermoelectriciy
586e
Growth Kinetic Study of Chlorella Vulgaris
608a
Elemental Mercury Oxidation and Its Resultant Oxidized Mercury Adsorption by Cupric Chloride-Impregnated Carbon Sorbent
53a
Quantum Chemical and in Situ Raman Studies for the Homogeneous Thermal Decomposition Kinetics of Triethylgallium
115b
Multi-Objective Optimization Method to Design the Pseudo-SMB Process for the Separation of Ternary Mixtures
345a
Studies On Properties of Laminar Premixed Hydrogen-Added Ammonia/Air Flames for Using Ammonia in Production of Hydrogen
138c
Graphene-Silicon Composite for Li-Ion Battery Anodes
629c
Role of Specific and Van Der Waals Interactions in Adhesion of Silica MFI Zeolites (010) with Polyimides
643a
Large-Scale Production of Elastin-Like Polypeptide-Tagged Organophosphate Hydrolase (OPH)
642e
Proteomics Identifies Genetic Targets to Increase CHO Cell Productivity and the Use of Short Read Sequencing Technology for Studying Gene Regulation in CHO Cells
14a
Surface Functionalisation of Bacterial Cellulose Nanofibrils as the Route to Produce Green Polylactide Nanocomposites with Improved Properties
487p
Biodiesel Production From Acid Oil (Dark Oil) Containing High Free Fatty Acid Via Solid Acid Catalyst
34a
Integrating Transcription Factor Dynamics and Metabolic Network Activity in Differentiating Adipocytes
182c
A Weighted Graph Algorithm for Identifying Dominant Metabolic Pathways
182g
Multi-Scale Engineering of Heterologous Polyketide and Isoprenoid Natural Products in Escherichia Coli
235g
Novel Cellulose-Chitin Copolymers From Metabolically Engineered Gluconacetobacter Xylinus
443d
Adipocyte-Preadipocyte Interactions in Adipose Tissue Development
660e
Microfluidic Gradient Chamber for Two-Dimensional Mapping of Hepatic Drug Response
192b
Enhanced Sulfur Tolerance of Ni-Rh Alloys for Reforming and Methanation Reactions
348f
Formation of Multifunctional Nanoparticles by Integrated Electrospray and Microfluidics for Cancer Imaging, Diagnostics and Therapy
392c
Nanoscale Directed Assembly to Prepare siRNA Containing Liposomes
442f
Use of Nanochannel Membranes to Regulate the Release of Cytokines From Biodegradable Reservoirs
466b
Hydrogen Bond Induced Exfoliation of Nanoparticles in Polymer Matrix and Its Application in Foaming Process with Supercritical Carbon Dioxide
489ah
PC12 Cell-Based Integrated Device with Dual Nanoporous Membranes for Parkinson Treatment
642f
Growth and Productivity of NS0 Cells with Nanoparticle Cholesterol Supplementation
647f
Protein A-Based Immobilization of Antibody Onto Polymeric Microfludic Device for Enzyme-Linked Immunosorbent Assay
141f
Electrokinetically Driven DNA Dynamics in Nanochannel/Microwell Array
208a
Integration of Electroporation-Based Gene Transfection and Nanofiber-Based Cell Culture for Embryonic Stem Cells
577a
A Nanochannel/Microwell Array Device for Controlled Gene Delivery to Individual Cells by Localized Electroporation
591g
Ion Transport in Nanochannels Fabricated by DNA Combing and Imprinting
208c
Gene Delivery to Embryonic Stem Cells by Micronozzle Array Enhanced Sandwich Electroporation
336g
Surface Modification of a Polycaprolactone Nanoporous Membrane with Poly(ethylene glycol) by Using Oxygen Plasma to Prevent Fibroblast Adhesion for Implantable Drug Delivery Devices
698b
Surface Modification of a Polycaprolactone Nanoporous Membrane with Poly(ethylene glycol) by Using Oxygen Plasma to Prevent Fibroblast Adhesion
528d
Novel Filtration Membranes Fabricated by Polyaniline Nanofibers
488s
In Vitro Skin Permeation of Cubosomes Containing Water Soluble Extracts of Barberry
324d
Composition and Structures of Active Sites in Mixed-Metal Ziegler-Natta Catalysts
491f
Development of Accident Scenarios and Consequence Analysis Using CFD Simulation for Hydrogen Refueling Stations
410c
Novel Approaches to High-Throughput Delivery of Silencing RNA
232a
Droplet Motion in a Microfluidic Channel with a Constriction
335j
Development of Structure Design for Divided Wall Column Using a Sloppy Distillation Arrangement
622e
Covalent Molecular Assembly of Gold Nanoparticles for Non-Volatile Memory Applications
646b
Expediting the Wound Healing Process Using An Improved Alginate Wound Dressing
644e
New Insights Into the Ozonolysis of Surface-Adsorbed Polycyclic Aromatic Hydrocarbons
269f
Evaluation of in-Situ Synchrotron Techniques for Dynamic Structural Analysis of Supported Bimetallic Nanoparticles
484c
Complementary Approach for Thermodynamic Analysis of Metabolic Pathways
608a
Elemental Mercury Oxidation and Its Resultant Oxidized Mercury Adsorption by Cupric Chloride-Impregnated Carbon Sorbent
624d
Investigation of Palladium Sorption On the Hydroxyl, Sulfhydryl, and Amine Functionality to Improve the Palladium Deposition On the Genetically Engineered Tobacco Mosaic Virus
661b
Molecular Dynamics Simulations of WATER Cavity Distortion for Determining Clathrate Hydrate Equilibria
163a
Turbulent Flow of Dilute Aqueous Suspensions of Single Wall Carbon Nanotubes in a Smooth Pipe
335j
Development of Structure Design for Divided Wall Column Using a Sloppy Distillation Arrangement
494k
Chaotic Operation of a Small Tank pH System for the Identification of Titration Curve
362e
On the Anchoring and Modification of Co Particles for the Synthesis of Single Walled Carbon Nanotubes From CO
73b
Effects and Roles of Air Feed On the Noncatalytic Gasification of Jet Fuel in Supercritical Water
188b
Effects of Varying Water-to-Glycerin Molar Ratio for Supercritical Water Reformation of Glycerin
225f
Free-Radical Maleation of Polylactide in Supercritical Carbon Dioxide
315e
Characterization of Linear Low-Density Polyethylene (LLDPE) and Maleated Linear Low-Density Polyethylene (LLDPE-g-MA) Infused with Nanoclay in Supercritical Carbon Dioxide
428c
Synthesis Gas Production by Noncatalytic Reforming of Glycerin in Supercritical Water: Effect of Reaction Temperature
516c
The Effects of Space Time Upon the Supercritical Water Reformation of Glycerol
420d
In Situ Catalytic Monitoring On Pt-Vanadia Nano Systems
262f
Modulation of Transition Probability and Temporal Dynamics by the Bistable Rb-E2F Switch
487ae
Effect of Catalyst Coating On Anode Current Collector On IR-MCFC Performance
234e
Biobutanol From Yeast: A Synergistic Genome and Protein Engineering Approach
62bj
Metabolically Controlled 3D Cellular Integration Into Lipid Silica Films
163a
Turbulent Flow of Dilute Aqueous Suspensions of Single Wall Carbon Nanotubes in a Smooth Pipe
256f
Adsorption Kinetics of Alkyl Polyethylene Oxide Surfactants at the Water-Oil Interface
76b
Effects of Enzyme Loading and β-Glucosidase On Enzymatic Hydrolysis of Switchgrass Processed by Leading Pretreatment Technologies
76e
Comparative Study On Enzymatic Digestibility of Upland and Lowland Switchgrass Varieties Processed by Leading Pretreatment Technologies
355c
Optimization of Process Parameters for Alkaline Pretreatment of Switchgrass
405c
The RelHy Project: Durability and Efficiency of High Temperature Steam Electrolysis
88b
Non-Traditional Methods to Enhance Creativity for Engineering Innovation
485r
A High-Throughput, Scale-Down Model for Process Optimization Using Product Quality as a Performance Metric
232h
Gel Formation and Aging in Concentrated Nanoparticle Suspensions
375f
Modeling the Action of Antimicrobial Peptides: Transient Diffusion of Ions and Osmotically-Driven Flow
196d
Fast Pyrolysis of Pine Wood: The Influence of Process Parameters On the Quality and the Quantity of the Pyrolysis Oil
419e
DNA Hybridization Detection Using Spectral Changes of Zinc Selenide Nanocrystals
207b
Liquid-to-Solid Phase Transition: Drainage of a Simple Nonpolar Fluid Under Nanometer Confinement
93b
Biodegradable Hydrogels with Concentrated pDNA/PEI Polyplexes for Tissue Engineering and Regeneration
257e
Protein-Polymer Core-Shell Nanoparticles as Non-Viral Gene Delivery Vehicles
361e
Using a CFD-DEM Modeling Approach to Address Upstream Oil Production Challenges
108e
The Shear-Induced Diffusivity of a Dilute Suspension in Bounded Systems
418d
Dynamic Metabolic Flux Analysis with Linear Flux Functionality
238a
Nanoporous Carbon for Energy Applications
402j
Particle-Wall Hydronamic Coupling in Multi-Particle Ensembles
467d
Investigating Enzyme Kinetics Using Nanofluidic Devices
652f
Energetic Material and Specialty Chemical Development and Production at Radford Army Ammunition Plant
225d
Impact of Sol Molecular Weight and Architecture On the Mechanical Performance and Toughness of Polymeric Gels
273c
Modifying the Properties of Nanocomposite Triblock Copolymer Gels through Filler Size and Surface Chemistry
352c
Enhanced Conductivity and Melt Processing of Filled Polymer Composites through the Addition of A Low Melting Eutectic Metal
533a
Hierarchically Structured Soft Polymer Composites: Multifunctional Materials for Many Applications
697c
Structural and Mechanical Properties of ABA/AB Gels: Dissipative Particle Dynamics Study
234f
Engineering Escherichia Coli for Hydrocarbon Production
223g
Open Discussion "Overcoming Barriers to Smart Manufacturing" Walk-Ins Are Welcome
634e
Physical and Nutrient Stresses for Stimulating Algal Biofuel Production: Quantitative Control of Fermentation
687c
Interfacial Peptide Assemblies for Use in Nanocrystal Synthesis
60t
Zero Waste Semiconductor Facility
416a
Separation of Plasma From Blood by Crossflow Filtration through Nanoporous Filters From a Microchannel
235a
Metabolic Engineering of Isoprenoid Metabolism in E. Coli for Overproduction of Taxol Precursors
441f
Dielectrophoretic Responses of Human Erythrocytes
314h
Adhesive Dynamics of Lubricated Membranes
170a
Engineering Multifunctional Microfluidic Platform for Stem Cell Study
92a
GaAs Integration On High-Quality Ge On Si for Multijunction Solar Cells
654b
Enhanced Nanofluidization by Alternating Electric Fields
52b
The Evolution of Quality by Design in Drug Substance Development
627g
Controlling Cell Adhesion and Migration through Ligand Presentation
440a
Improving and Elucidating Isobutanol Tolerance in Escherichia Coli
2d
The Effect of Density On Silicon Nanowires Growth and Tapering
232p
Two Different Heat Transfer Asymptotes and Interplay of Elasticity and Inertia in Heat Transfer Enhancement in Laminar Flow in Straight Non-Circular Tubes
92c
Chemical Vapor Deposition of WNxCy for Diffusion Barrier Application Using a Tungsten Diphenylhydrazido Complex
339f
Identification of Clusters in a Circulating Fluidized Bed of Geldart Group B Particles by Multi-Resolution Analysis
430b
Safe Practices for Azide Chemistry Scale-up: A Case Study On a Pharmaceutical Intermediate
49f
Isosteric Heats of Adsorption in the Henry's Law Region for Carbon Cylindrical Nanopores and Spherical Nanocavities
109b
Adsorption and Sustainability
308e
Analysis of the Roles of Distributed Mass Transfer Resistances for Adsorbents Using Frequency Response Methods
338q
Performance of Metal-Impregnated Carbon Silica Composite Adsorbents for Air Purification
353f
CO2/H2O Adsorption Equilibrium and Rates On CuBTC and Ni-DOBDC
495c
Metal-Impregnated Nanoporous Carbon-Silica Composite Adsorbents for the Separation of Light Gases From Air
338p
High Pressure Flow Mixing Calorimetry for the Investigation of CO2 Capture in Amine Solutions
711b
Spotted Vesicles and Striped Worms: Ligand-Induced Phase Separation
241g
Molecular Interactions in DNA and Morpholino Surface Hybridization
307e
Cyclohexane-in-Water Emulsion as a Sacrificial Template for the Synthesis of Multilayered Polyelectrolyte Microcapsules
550c
Performance Analysis of Morpholino Monolayers: Platforms for Label-Free Detection of DNA Molecules
45d
Cell Quakes: Mechanics and Microrheology in Active Gels and Living Cells
122d
ITEST: Green Energy Technologies in the City
178f
Water Adsorption Behavior On Unique Titanium Dioxide Polymorph (TiO2-B) Facets
207f
Capillary Assembly in Surfactant Monolayers
341d
Modeled and Measured Carbon Gas Concentrations in Eastern Iowa
620a
Properties of Palladium-Gold Alloys for Hydrogen Separation and Purification
615f
Evaluation of Shear Induced Hydrophobicity and Drug Release
80a
Approaches to Renewable Diesel Production
480d
Characterization of Surface and Frictional Properties of Two-Component Alkyltrichlorosilane Monolayers
57k
Design Studies of Heterogeneous Catalysis in Microchannels
519f
Enhanced Magnetic Properties in Functionalized Iron Oxide Nanoparticles for Biomedical Applications
587e
Monolithic Catalysts for the Cleanup of Coal Gases
487r
Hydrothermally Stable Catalysts and Catalyst Supports
186b
Design and Operation of Novel Photobioreactors for the Cultivation of Microalgae for the Biofuels Sector
683b
The Impacts of Light, CO2 Concentration, Temperature, Medium On Growth of Microalgae for Biofuels Production
683c
Coordination of Growth Rate and Lipids Biosynthesis by Nutrients in Microalgae
490aa
Evaluation of Enzyme Immobilization Methods for Xylose-to-Xylulose Isomerization
643e
A Native S. Cerevisiae Fermentation Methodology for Converting Glucose and Xylose From Biomass Hydrolysate to Ethanol
684g
Dual Delivery of BMP-2 and Vancomycin From Polyurethane Scaffold for Infected Bone Wound Healing
116i
Study On Three-Phase Flow Behavior Under Electromagnetic Field
438d
Identification and Control for Optimizing Building Energy Demand
355e
Understanding Ionic Liquid Pretreatment of Lignocellulosic Biomass by Hyperspectral Raman Imaging
369b
Investigation of Mass Transfer During Membrane Formation – a Route Leads to Insight of Membrane Morphology Control
658e
The Catalytic Binuclear Elimination Reaction
137e
Evaluation of CFB Riser and Downer Reactor Performance by Catalytic Ozone Decomposition
72e
Microfluidic Continuous Particle Separation BASED ON Electrical Properties Via AC-Dielectrophoresis
184a
Syngas Chemical Looping Gasification Process and Its Novel Retrofit Applications
203c
Conversion of Solid Fuels in the Iron-Based Chemical Looping Process
245d
Biomass Conversion Via Direct Chemical Looping Technology – Process Simulations
559b
Carbon Negative Biomass Chemical Looping (BCL) Process – Reactor Design and Life Cycle Analysis
715b
Utilization of Chemical Looping Strategy to Minimize Exergy Loss
16e
Design, Construction and Preliminary Tests of the Sub-Pilot Scale Syngas Chemical Looping System
353h
A Novel Metal–Organic Coordination Polymer for Selective Adsorption of CO2 Over CH4
645c
Binary Combinations of Lipid-Like Materials for siRNA Delivery
669b
Direct Catalytic Conversion of Cellulose to 5-Hydroxymethylfurfural (HMF)
318c
Supercritical Fluid Aided Synthesis of Nanostructured Catalyst
163i
Relationship Between Structure and Transfer Coefficients in Fast Fluidized Beds--a Theoretical Analysis
43b
Internal Structure of Ultrathin Diblock Copolymer Brushes
669d
Homogeneous Catalytic Conversion of Cellulose in to 5-Hydroxymethylfurfural (HMF) Using 1-Ally-3-Methylimidazolium Chloride (AmimCl) Ionic Liquids
669e
Cellulose Acetate Butyrate Prepared From Sugarcane Bagasse in Ionic Liquid
707b
Regenerated Cellulose Films Prepared From Sugarcane Bagasse in Room Temperature Ionic Liquid
668a
Preparation of Mesh-Adjustable Molecular Sieve (MAMS) Thin Films and Membranes
22b
Multi-Scale Modeling of Particle Flows in Granulators
65c
Atomic Layer Deposition of Zinc Oxide in a Fluidized Bed Reactor for Novel Sunscreens and Cosmetics
359c
Large-Scale Preparation of Highly Dispersed Pt Nano-Particles On Mesporous Silica Gel by ALD
584e
Re-Evaluation of Vickers Indentation Toughness Testing On CNT Incorporated Composite Materials
705e
Atomic Layer Deposition of Quantum-Confined Nanostructured Materials
610a
Pt/TiO2 Nano-Catalyst Synthesized by Atomic Layer Deposition
423b
Optimal Event Point Determination for Short-Term Scheduling of Multipurpose Batch Plants
385c
A Multi-Grid Scheduling Model for Integrated Gasoline Blending Operations
293g
Novel Bacterial Biosensors for the Discovery of Subtype-Selective Thyroid Receptor Modulating Drugs
498e
A Calorimetric Study of Ammonia Adsorption and Desorption Over a Cu Beta Zeolite Catalyst for Urea SCR Applications
13a
Effect of Acrylated Microcrystalline Cellulose On the Properties of Silica-Filled Rubber Composites
232r
A Model of HfO2 Chemical Vapor Deposition Chemistry and Fluid Mechanics On H-Si Surfaces
200d
Modeling and Dynamic Simulation for Silicon Production through Silane Pyrolysis
2f
Characterization of Carbon Microspheres for Trichloroethylene Remediation
342a
Comparison of High Abundance Protein Depletion Techniques
348f
Formation of Multifunctional Nanoparticles by Integrated Electrospray and Microfluidics for Cancer Imaging, Diagnostics and Therapy
251d
On the Calculation of Operability Sets of Nonlinear High-Dimensional Processes
98c
Determining the Levels of Key Liver Biomarkers Using An Ir/C Printed Biosensor for the Detection of Liver Disease
560f
Pathways for Reaction in CO Oxidation Over Phosphate Supported Au Catalysts
360c
Development and Modeling of a Novel Spray Reactor for p-Xylene Oxidation to Terephthalic Acid
306d
Dielectrophoresis of Colloidal Suspensions of SWNTs: Formation of 1-D Assemblies
261a
Bacterial Aerosol Neutralization by Aerodynamic Shocks in a Novel Impactor: An Integrated Computational and Experimental Study
242d
Hydrogen Production Over Carbon Nanotube Supported Platinum Catalyst: Effect of Oxygen Functionalization On Catalysis
321d
Antimicrobial Biomaterials Based On Poly(lactic-co-glycolic acid) Dispersed with Carbon Nanotubes
337o
Block Copolymer Assisted Carbon Nanotube Dispersion in Saturated Hydrocarbons
193c
Aqueous-Phase Dehydration/Hydrogenation of Sorbitol: Identification of Reaction Pathways
497a
CFD Simulation and Experimental Validation for An Industrial Crystallizer of Potassium Chloride
338c
Liquid State Synthesis and CO2 Sorption Characteristics of Lithium Zirconates with Different Crystalline Phase
350e
Computational Model of the Mark-IV Electrorefiner- 2D Potential and Current Distributions
159b
Thermal, Mechanical, and Barrier Properties of PET-Platelet Nanocomposites
22h
Modeling and Numerical Investigations of Stretching Liquid Bridges
673e
Inferring Fuel-Rich Toluene Flame Chemistry From Photo-Ionization MBMS Analysis and Modeling
472a
An Empirical Model for Crude Distillation Units in Petroleum Refinery Planning
200e
A Reduced Reaction Mechanism for the Simulation of Ethylene Flame
588b
Pulse-Field Gradient NMR Study of TAA+-Silica Association in Zeolite Clear-Solution Syntheses
485ad
Computational Design and Selection of Glucose Oxidase
608a
Elemental Mercury Oxidation and Its Resultant Oxidized Mercury Adsorption by Cupric Chloride-Impregnated Carbon Sorbent
218b
A Numerical Method for Optimizing Oxyfuel Power Plants
564a
Two-Phase Bioconversion Process for Effective Utilization of Hexoses and Pentoses in Corn Stover
553a
Production of Autoclaved Cellular Concrete with Aluminum Salt Cake Residues
43b
Internal Structure of Ultrathin Diblock Copolymer Brushes
530c
Photocatalytic Conversion of CO2 and H2O to CO and CH4 by Cu/TiO2-SiO2 Nanocomposites
154e
Ultrasensitive NH3 Gas Sensor From Nanostructured TiO2 -Polyaniline PN Heterojunctions
666c
Kinetics of Pd Catalyzed Carbonylation of Olefins and Alcohols: Comparison of Homogeneous and Heterogeneous Catalysts
598f
Confocal Imaging and Flow Cytometry-Based Platform for Intramembrane Protease Analysis and Drug Discovery
346c
Strain Improvement for Increased Isobutanol Production
365f
Production of Fisher-Tropsch Liquids From Biomass-Derived Syngas
286e
Interfacial Tension of Pure Substances and Binary Mixtures by Density Functional Theory Combined with Peng-Robinson and Cubic-Plus-Association Equations of State
355f
ABE (acetone, butanol, and ethanol) Production From Fiber-Enriched DDGS Pretreated by Electrolyzed Water
488u
Polyether Polyol Derivatives as New Bioconjugate Carriers
423c
Production Planning and Scheduling Integration through Augmented Lagrangian Optimization
404c
Carbon Dioxide Capture by Adsorption of Carbonaceous Materials with Direct-Electrothermal Desorption
709f
A Combined Process of Vacuum and Temperature Swing Adsorption for Post-Combustion CO2 Capture
440g
Improving Ethanol Tolerance of Pichia Stipitis Via Continuous Fermentation with Cell Retention
393e
Development of a Bioreactor System for Tissue Engineered Skin Substitutes with Integrated Convective Flow Networks
65c
Atomic Layer Deposition of Zinc Oxide in a Fluidized Bed Reactor for Novel Sunscreens and Cosmetics
409c
Coating Ultra-Thin Microporous/Mesorporous Films On Particle Surface
488x
Particle Surface Modification by Coating Ultra-Thin Microporous/Mesorporous Films
513g
The Catalytic Significance of Surface Ab Planes of M1 Phase in Propane Ammoxidation
705e
Atomic Layer Deposition of Quantum-Confined Nanostructured Materials
610a
Pt/TiO2 Nano-Catalyst Synthesized by Atomic Layer Deposition
84b
Interlaminar Fracture Behavior of Polypropylene Fiber/Glass Fiber Hybrid Composites
643d
Enhanced Cellulases and Xylanase Production From Pelletized Trichoderma Reesei Fermentation
214d
- Accelerated Deployment of Nanostructured Hydrotreating Catalysts
232l
Using Rheo-SALS to Study Shear Induced Phase Separation (SIPS) in Aqueous Solutions of Cationic Surfactant and Salt
469d
Hydrogen Production by Sulphur Iodine Cycle Fed by Solar Energy: Realization of a Laboratory Plant and Possible Spin-off On the Industrial Field
516a
Experimental Corrosion Tests of Metals, Metal Alloys, and Ceramic Materials, in Boiling and High Temperatures Vapours I2-HI-H2O Mixtures for Sulphur-Iodine Thermochemical Cycle
485bm
Dynamic NF-κB Signaling in the Early Drosophila Embryo Patterns Multiple Tissue Types
214d
- Accelerated Deployment of Nanostructured Hydrotreating Catalysts
184e
Solar-Thermal Reactor Engineering - the Ultimate in Process Intensification
434b
High Temperature Steam Gasification of Algae and Switchgrass in a Transport Tube Reactor
487ai
Modeling of a Multiple Tube Aerosol Flow Reactor for High Temperature Solar-Thermal Processes
537c
CFD Modeling of a Multiple Tube Solar Aerosol Flow Reactor and Experimental Validation
490g
Analysis of Biodiesel: Use of HPLC with An ELSD, Size Exclusion Method
219e
Design for Six Sigma in High Value Materials Development
645b
Development of pH-Responsive Nanogels for Delivery of siRNA
593c
The ICH Q8 Definition of Design Space: A Comparison of the Overlapping Means and the Bayesian Predictive Approaches
10a
Kinetic Study of Biomass Gasification at High Pressures
325b
The FDA – Novartis CRADA: A Risk-Based and Systems Approach for Quality by Design (QbD) Implementation for An Approved Pharmaceutical Product
99a
Static Mixing of Granular MATERIALS
215g
Microscale Two-Stage Liquid-Liquid Extraction for Purification of Engineered Proteins
197e
Insights From Process Engineering Simulations for Envisioning Design of Chemical Looping Combustion Process for Solid Fuels
673g
Studies of Soot Oxidation On a Two- Stage Premixed Burner; Effects of Temperature and Fuel Composition On the Evolution of Particle Size Distribution
691d
Effect of the Flue Gas Composition On Mercury Speciation Under Homogeneous and Heterogeneous Conditions
16b
Attrition and Reactivity Analysis of NiO/NiAl2O4 Catalyst Particles for Chemical Looping Combustion
409b
Functionalized Alumina Particles as pH-Responsive Drug Carriers
149b
Density Functional Theory Studies On the Relative Reactivity of Chloroethenes On Fe(110)
576e
Electrochemical Synthesis and Characterization of Organic/Inorganic Hybrid Nanostructures for Photovolatics
180p
Measurement of Bubble Points of CO2 in Ionic Liquids, [BMP][Tfo]and [P14,6,6,6][Tf2N] Using Variable-Volume View Cell
180q
Vapor-Liquid Equilibrium Measurement for the Binary System of Carbon Dioxide (CO2) + 1,1,1-Trifluoroethane (R-143a) at High Pressures
337aa
Synthesis of SiO2 Inverse Opals in Supercritical Carbon Dioxide
339o
Manufacturing Polymer Nano Particles by Using Supercritical Fluids
482d
Molecular Dynamics Simulations of Complex Mixed Lipid Bilayers to Model Yeast Membranes
624d
Investigation of Palladium Sorption On the Hydroxyl, Sulfhydryl, and Amine Functionality to Improve the Palladium Deposition On the Genetically Engineered Tobacco Mosaic Virus
17b
Adsorption of Arsenate On Alginate Encapsulated Magnetic Sorbent with the Presence of Humic Substances: A Spectroscopy Analysis
328f
Engineering Human T-Cell Receptor Signaling Dynamics
364b
Energy Efficiency Improvement in LNG Liquefaction Processes
73e
Performance Prediction of Entrained Flow Coal Gasifier for IGCC System Using a Steady-State Process Model
540c
Phase Transition in Polymer Brushes and Its Implication to Surface Forces
251a
Nonlinear Stochastic Modeling and State Estimation of Weakly Observable Systems: Application to Industrial Polymerization Processes
521b
Kinetic and Equilibrium Adsorption Properties for Copper and Mercury Ions On Chemically-Modified Chitosan Membranes
492j
Yeast Nutrition and Practical Aspects During Brewing Fermentations
492j
Yeast Nutrition and Practical Aspects During Brewing Fermentations
423f
Planning and Long-Term Scheduling of a Single-Stage Multi-Product Continuous Process with Complex Recycling Structure
257b
Novel Cationic Lipids with Enhanced Gene Delivery and Antimicrobial Activity
489aj
Employing Thiol-Ene Radical and Azide-Acetylene Click Chemistries for the Preparation of New Polycephalic Peptide Amphiphiles: From Synthesis to Applications
616b
Surfactant Formulation Principles for Self-Dispersing Aerosol Drug Carriers Based On Marangoni Flow in the Pulmonary Airways
93a
Contribution of Sustained Release to In Vivo Gene Expression
5bf
Bioactive Materials for Controlled Release and Tissue Engineering Applications
62af
Peptide-Functionalized Affinity Hydrogels for Reducing Local Inflammatory Response
131d
Controlling the Availability of Cytokine/Chemokine with Peptide-Functionalized Affinity Hydrogels to Regulate Local Inflammation
179k
The Discharge of Thin Film Li Electrode Under Transport Control
156d
Replica Exchange Molecular Dynamics-Based Methods for Predicting Peptide Self-Assembly and Aggregation
485p
Design of Isotope Labeling Experiments to Measure Metabolic Flux through the Gamma Aminobutyric Acid (GABA) Shunt in Plants
339f
Identification of Clusters in a Circulating Fluidized Bed of Geldart Group B Particles by Multi-Resolution Analysis
597b
Synthesis and Biophysical Analysis of Small Molecule Antagonists of Toxic Protein Aggregation
141a
Free-Solution Conjugate Electrophoresis Sequencing of Over 250 Bases of ssDNA
187a
Separation of Oil and Other Organics From Water Using Inverse Fluidization of Hydrophobic Aerogels
296a
Supported Bimetallic Cu/Ni Nanoparticles for Low–Temperature Water-Gas-Shift Reaction
486r
Dynamic Simulation for the Production of Dimethyl Ether From Natural Gas
273b
A Molecular Look at Single Ion Conductors for Battery Application: Interplay of Free Ion Content, Polymer Mobility, and Conductivity
679d
Spectroscopic Observation of CO2 Absorption Behavior of Nanoparticle Ionic Materials
411c
Evaluation of Surface-Functionalized Nanoparticle Ionic Materials for CO2 Capture
415f
Mineral Scaling of RO Membranes in the Presence of Biofilm
71e
Ground and Transition State Computations On Cytochrome P450 BM-3
451e
Tuning the Thermal and Volumetric Properties of Epoxy Nanocomposites: A Molecular Simulation Study
192e
In Situ XPS and DRIFTS Studies On the Supported Co/CeO2-ZrO2 Catalysts for Ethanol Steam Reforming
383a
Predicting the Micellization Behavior of Perfluorinated and Partially-Fluorinated Surfactants in Dilute Aqueous Solution Using Computer Simulations and Molecular-Thermodynamic Theory
351e
Bio-Inspired Assembly of Nanoplatelets by Electrical Field
419b
Periodic Plasmonic Nanostructures as Efficient SERS Substrates for Biosensing
447b
Development of a Scalable Bottom-up Nanomanufacturing Platform for Highly Efficient Photovoltaics
703d
Biomimetic Nanocomposites Fabricated by Controlled Assembly of Nanoplatelets
345e
Production of Ethanol From Biomass-Derived Syngas
356a
Parameter Identification and Dynamic Optimization of Seeded Suspension Polymerization Process
638d
Structure, Misfolding and Aggregation of Amylin Protein
502b
Interaction of Antimicrobial Peptide Ovispirin with Lipid Bilayers
335z
Removal of Salt Impurities From Glycerol Using Electrodeionization Technique
133a
Integrated Hydropyrolysis and Hydroconversion Process for Production of Gasoline and Diesel Fuel From Biomass
383b
Cyclodextrin Inclusion Compounds for Novel Polymer Self-Assembly
639d
Low Aqueous Solubility Measurement (down to 10-12 in molar fraction) of a 5 Arenes Polycondensed Hydrocarbons Using Dynamic Saturation Method
376c
Model-Based Analysis and Quantitative Measurement of Key Components of Tumor Necrosis Factor Trafficking in a Tuberculosis Granuloma
65af
Grafted Block Copolymer Nanoassembly Drug Carrier
36b
Conquering Innovation Fatigue in Corporations: Helping Chemical Engineers Reach Their Innovation Potential
259f
Disruptive Innovation and Intellectual Asset Strategy: What Engineers and Managers Need to Know
368d
Conquering Innovation Fatigue in University-Industry Collaboration: Recommendations for Success
334a
Thermal Stabilization of Tissue Samples Using the Denator Stabilizor T1: The Inactivation of Proteases and Elimination of Proteolytic Fragments On Two-Dimensional Gels
65g
Quantum Chemical Characterization of Candidate Insensitive High Energetic Materials
599b
Impact of Hemicellulose Pre-Extraction for Bioconversion On Birch Kraft Pulp Properties
274d
A Sustainable Design Project for the Process Separations Class
322g
A New Control Structure for Divided-Wall Columns
642c
Case Study: Investigation of the Improved Fed-Batch Platform for the Selection of a Schering-Plough Monoclonal Antibody Cell Line to Support the Manufacturing of Tox and Early Clinical Supplies
638d
Structure, Misfolding and Aggregation of Amylin Protein
171a
Assessment of Freshwater Requirements and Conservation Options for the Production of Lignocellulosic and Algal Biofuels and Thermoelectriciy
18d
First-Principles Investigation of Alkali Promotion Mechanism in Oxidation Reactions Over Ag(111) Surfaces
139e
Investigation of the Catalytically Active Site in Oxidation Catalysis by Gold: Insights From First Principles
158b
Targeted, Well-Defined, and Uniform Ag Nanostructures as Highly Selective Olefin Epoxidation Catalysts
269d
Improving Long-Term Stability of Reforming Catalysts and Electro-Catalysts: From First Principles Studies to Novel Alloy Catalysts
305d
First-Principles Analysis of the Activity of Transition and Noble Metals in the Direct Utilization of Hydrocarbon Fuels at Solid Oxide Fuel Cell Operating Conditions
530e
Exploiting the Optical Properties of Well-Defined Nano-Structures for Photo-Catalytic Applications
560d
An Investigation of the Nature of Active Sites On Pt/Mo2C Water-Gas Shift Catalysts
561b
Measuring and Relating the Electronic Structure of Alloys to Their Chemical and Catalytic Performance
43e
DNA Surface Functionalization and Core Crosslinking of Diblock Copolymer Core-Shell Nanoparticles
71d
Robustness of an E. coli Strain with a Defective Aminoacyl-tRNA Synthetase
427g
Isolation of Functional Variants of the Lasso Antimicrobial Peptide Microcin J25 by High-Throughput Screening and in Silico Design
107d
Templated Fabrication of Multifunctional Gold Nanoflask Particles for Controlled Drug Delivery
419b
Periodic Plasmonic Nanostructures as Efficient SERS Substrates for Biosensing
447b
Development of a Scalable Bottom-up Nanomanufacturing Platform for Highly Efficient Photovoltaics
623f
Self-Assembled Biomimetic Antireflection Coatings for High Efficiency Photovoltaics
62bb
Metabolic Analysis of Prostate Cancer
612a
Comparison of the Mechanism of Toxicity of Binary Metal Oxide Nanoparticles Based On Dissolution and Oxidative Stress Properties
485ad
Computational Design and Selection of Glucose Oxidase
485ad
Computational Design and Selection of Glucose Oxidase
464c
Biomolecular Optical Transport in Nanoscale Slot Waveguides
491e
Consistency of Experimental Data IN Chemical-Technological Systems for Balance Calculation
168b
RHEED-TRAXS Development for Real Time, in-Situ Stoichiometry Analysis During Thin Film Deposition
5au
Quantitative Engineering Approach to Particle and Particulate Systems Design
11b
Design of Regime Separated Granulation
22b
Multi-Scale Modeling of Particle Flows in Granulators
201e
The Development of Continuous Table Manufacturing Process Using Roller Compaction
382c
NIPTE-FDA Collaborative Case Study On Model-Based Design Space Development Across Scales and with Stability Considerations
465c
Model Based Approach to Determine Optimum Operating Conditions in High Shear Granulation
245b
Process Engineering for Lignocellulosic Ethanol Facilities: a Combined Model- and Experiment-Based Approach and Comparison with Operational Results From a Demonstration-Scale Plant
693a
Small Molecule Diffusion in a Hydrogel Microfluidic Device
98c
Determining the Levels of Key Liver Biomarkers Using An Ir/C Printed Biosensor for the Detection of Liver Disease
394f
Carbon Dioxide Reforming of Methane Over Nickel Supported Mesoporous Material Catalysts with Superior Stability
675a
Dendrimer-Derived Bimetallic Catalysts for Liquid-Phase Hydrogenation Reactions
637c
In Vitro Enzymatic Synthesis of Phytochelatin-Capped CdS Nanocrystals
529b
A New Granulation Method in Supercritical Fluid
263e
Shape- and Size-Controlled Fabrication of Lead Chalcogenide and Ferromagnetic Nanocrystals for Information Storage Devices
707b
Regenerated Cellulose Films Prepared From Sugarcane Bagasse in Room Temperature Ionic Liquid
370d
Reduction of Nonspecific Protein Adsorption On Nonwoven Fabrics by Hydrophilization After UV-Induced Surface Graft Polymerization
259c
Managing IP in Light of Changing US Patent Law
486e
Wavelet Texture Analysis Based On Best Feature Selection for Texture Classification
403a
Preparation of Polypropylene Nanocomposites Based On Designed Synthetic Nanoplatelets
194c
Molecular Modeling of CO2 Adsorption and Transport in Nanoporous Materials
264e
Networked Monitoring and Fault-Tolerant Control of Nonlinear Process Systems
389f
Distributed Model Predictive Control of Nonlinear Systems Subject to Asynchronous and Delayed Measurements
454b
Supervisory Predictive Control of Integrated Wind/Solar Energy Generation Systems
504c
Architectures for Distributed Model Predictive Control of Nonlinear Process Systems
60e
Enhancing Bioremediation by Exploiting Bacterial Chemotaxis: 2-Dimensional Microcosm Studies
605b
The Effect of Polymer Equivalent Weight (EW) On Morphology in Hydrated Perfluorosulfonic Acid Membranes Via Molecular Dynamics Simulations
16d
The Effect of Ash On Oxygen Carriers for Chemical Looping Combustion of Solid Fuels
232e
Gas Hold-up Profiles Investigation in Ionic Liquid Column
393b
Expansion and Neural Differentiation of Embryonic Stem Cells (ESCs) in 3-Dimensional (3-D) Bioreactor Culture Systems
342a
Comparison of High Abundance Protein Depletion Techniques
462d
Integrated One Box Process for Hydrogen Production From Syngas
44a
Controlling Bond Scission Sequence of Methanol Decomposition On Pt-Modified Tungsten Carbide
357c
Coarse-Graining Agent-Based Computations: Equation-Free and Variable-Free Computations
326g
Endotoxin Removal: A Critical Step in Vaccine Production
202d
Metabolic Reprogramming in Tumor Cells Is Modulated by Integrin Binding
612c
Good Dispersion and Intense Interaction Enhance Antibacterial Activity of Single-Walled Carbon Nanotubes
196e
2D HSQC NMR Analysis and Application to Hot-Water Wood Extract Hydrolysate Characterization
196f
Hot-Water Extraction of Aspen Woodchips Prior to Pulping
245a
Wood-Based Biorefinery: An Update On the ESF Technology
245e
Ethanol Fermentation From Hot-Water Wood Extract Hydrolysate with A Modified Pichia Stipitis Strain HWR
390d
Bioethanol Fermentation by Robust Recombinant E. Coli FBWHR Using Wood Hemicellulosic Hydrolysate as Substrate
440e
N-Butanol Production Via Fermentation of Sugar Maple Wood Extract Hydrolysate
476f
Dilute Acid Hydrolysis of Concentrated Hot-Water Extract
188c
Roles of Subcritical Water in the Conversion of Switchgrass
342b
Fluorescent Zdye Platform for Differential Covalent Labeling of Proteins for 2D and 1D Gel Analysis
390d
Bioethanol Fermentation by Robust Recombinant E. Coli FBWHR Using Wood Hemicellulosic Hydrolysate as Substrate
335a
Separation of Styrene From the Mixture Consisting of Styrene and the Mixed Xylenes by Stripping Crystallization
510f
Multi-Scale Structured Compact Reactor System for Fischer-Tropsch Synthesis
617c
A Study of Municipal Solid Waste in US and Its Utilization as Transportation Fuel or Energy Resource
669c
An Ionic Liquid-Based Process for Conversion of Biomass Into 5-Hydroxymethylfurfural (HMF) as Petrochemical Intermediate
679b
Liquid Membrane Immobilized in Durable Inorganic Matrix for CO2 Separation
715a
Nano-& Micro-Engineered Adsorption Technology for Rapid CO2 Adsorption/Regeneration
347c
The Effect of Nanothin Biofunctional PEG Coating of Pancreatic Islets On Insulin Secretion Capability
113a
Coarse-Grained Lattice Monte Carlo Simulations of Continuous Systems
669a
Applications of Ionic Liquids in Green Process Engineering
502c
Characterization of the Structure of Oligopeptide Kinase Substrates Immobilized On Solid Surfaces
487i
Drying of Supported Catalysts – Impact of Film-Breakage and Crystallization On Metal Distribution
643d
Enhanced Cellulases and Xylanase Production From Pelletized Trichoderma Reesei Fermentation
585b
Application of Modeling to Scale-up Liquid Mixing Processes
337q
Magnetorheological Elastomers
208d
Gene Transfection Enhanced by Ultrasound Exposure Combined with Drug Treatment
643d
Enhanced Cellulases and Xylanase Production From Pelletized Trichoderma Reesei Fermentation
633d
Gold Nanoparticle-Bovine Serum Albumin Complexes for Imaging and Analysis of Macromolecule Drug Delivery through Murine Endothelial Monolayers
604f
Diffusion Mechanisms of Fluids Confined in Carbon Nanotubes, Carbon Nanotube Bundles and Hierarchial Carbons: Single-File, Fickian and Dual-Mode Diffusion
661c
Comparison of Numerical Simulators for Methane Production From Hydrate Reservoirs
116d
Growth and Nonlinear Resonant Interactions of Interfacial Waves in Stratified Channel Flows
14e
Chain Scission Reaction in Hydrolytic Degradation of Polylactic Acid
404c
Carbon Dioxide Capture by Adsorption of Carbonaceous Materials with Direct-Electrothermal Desorption
709f
A Combined Process of Vacuum and Temperature Swing Adsorption for Post-Combustion CO2 Capture
485bd
The Structural Effects On Biofilm Inhibition and Dispersion by Trp/Arg Antimicrobial Peptides
436c
Affinity Purification of Human Immunoglobulins A, G, and M by Hexamer Peptide Ligand
66e
Revolutionary Membranes to Slash Energy Consumption in Kraft Pulping Processes
165e
Understanding Mixture Adsorption in Carboxylate Based Metal Organic Frameworks
236e
Selection and Comparison of An Efficient Strategy for the Design and Optimal Operation of a Packed Bed Multitubular Reactor
674a
Combining Homogeneous Reactions with Heterogeneous Separations for Hydroformylation Reactions Using Tunable Solvents
256a
Surfactant Adsorption On Structure II and Semi-Clathrate Hydrates
19f
Water Ordering at Low-Index Alumina Surfaces: Structure and Reactivity
57a
Catalytic Activation of Carbon Dioxide On Cerium Oxide for Conversion to Liquid Fuels
60q
Water Ordering On Aluminum Oxide Surfaces
63r
Density Functional Theory Analysis of Methane Dehydrogenation On Platinum Nanoclusters for Liquid Fuels Production
619f
Spin-Polarized Calculations of Hydrated Magnetite Surfaces: Implications for Biomedical Applications
337l
Fabrication of Long Sub-Micron/Nanochannels Via Coffee-Ring Effect
132e
Conversion of Short Aldehydes From Bio-Mass Over CexZr1-XO2
132f
Etherification of 2-Methyl-Pentanal On Supported Palladium
191f
Conversion of Propylene and Propanal On HZSM-5
191g
Deoxygenation of Furfural On Pd and Pd-Cu Catalysts
295a
Analyses of Switchgrass Bio-Oils
394a
Conversion of Propanal Over HZSM-5 with Mesopores
107g
Structure and Colloidal Stability of Nanosized Zeolite Beta Precursors
157a
Improved Zinc Gallium Oxy-Nitrides as Visible Light Photocatalysts for Hydrogen Production
349a
High Temperature Decomposition and Reactivity of Bronsted Acid Sites in Zeolites
708b
Improved Zinc Gallium Oxy Nitrides as Visible Light Photocatalysts
250d
Twin Screw Mixer Continuous Granulation – A Systematic Study of Process Parameters
242f
Partial Oxidation of Methane
163d
Rheology of a Dilute Emulsion of Low-Viscosity Drops at High Shear Rates
590e
Microscopic Structure, Thermodynamic and Transport Properties of Ionic Liquids: Molecular Simulations and Theoretical Predictions
335k
Immobilization Strategies for Hydrophobic Affinity Peptidic Ligands to Hydrophilic Matrix
672g
Formation and Structure of Well-Defined Reactive Polymer Brushes Based On “Clickable” Poly 2-Vinyl-4,4,-Dimethylazlactone (PVDMA)
361e
Using a CFD-DEM Modeling Approach to Address Upstream Oil Production Challenges
294b
Graphene Dissolution at High Concentrations and Formation of Liquid Crystals
25b
Non-Biological Inhibition Based Sensing (NIBS) Demonstrated for the Detection of Toxic Sulfides and Arsines
25d
Highly Sensitive Multiphase Micro-Sensor as Micro-Gas Chromatography Detector for Selective Detection of Toxic Phosphonates
570e
Performance of An Integrated Array of Sensors for Micro Gas Chromatography Systems
603e
A MEMS-Based Toxicity Sensor Using An Acetylcholinesterase Mimic
37d
Mathematical Modeling of Drug Release: Analysis of the Effect of Absorption Rate and Finite Dissolution Rate On Rate of Drug Release
368f
Developing AIChE National Student Design Competition Problems by Collaborations Among Industry and Government Sponsors and Academia Participants
376e
Mechanochemical Energy Transduction in Muscle Contraction
433c
Organizing Thinking and Problem Solving Stategies That Cross Chemical Engineering Topics Areas and Can Guide Students to Success in Tasks Across the Curriculum
468f
Simplification and Application of An Interfacial Area Concentration Balance by Order Arguments
456c
Density Functional Theory Studies of Doping in Both Bulk- and Surface-State Titania
298f
Evidence for the Autophobic Dewetting of Compatibilized Droplets in Immiscible Melts
104c
Magnetic Nanoparticle Supported Metal Alkoxides for Ring-Opening Polymerization of Lactones
482f
Calculation of Partition Coefficients of Chain Anchors in Liquid-Ordered and Liquid-Disordered Phases
474f
Stabilization of An Enzyme by Domain Fusion to a Thermophilic Protein
690a
Three-Dimensional Modeling of Fluid Catalytic Cracking Industrial Riser Flow and Reactions
522e
Multiscale Perturbation Analysis of Mass Transfer and Reaction in a Microchannel with Porous Catalytic Coating
158f
Continuous Process for Synthesis of Nanocrystalline Zinc-Substituted Hydroxyapatite Catalyst for Transesterification Reactions
65ak
Evaluation of a Molecular Spring Nanothermometer
62bj
Metabolically Controlled 3D Cellular Integration Into Lipid Silica Films
57l
New Enzyme Catalyst for the Production of Functionalized Molecules Using Escherichia Coli
437f
Metabolic Pathways Optimization Using Stochastic Programming Models
682b
Aerosol Production From Solution Atomization and the Important Influences of Solvent, Concentration, Solution Age and Chemistry
375g
Analysis of the Dynamics of MS2 in Escherichia Coli: a Comparison Between the Stochastic Approach and Uncertainty Analysis
240f
Dielectrophoretic Fractionation of a Mixture of Bacteria and Yeast
675a
Dendrimer-Derived Bimetallic Catalysts for Liquid-Phase Hydrogenation Reactions
547d
NOx Storage Isocapacity Curves for Operation of NSR Catalysts
692f
Force Field for Dibenzotiophene and Its Alkyl Derivates
298g
Particle-Size and Chain-Length Effects On Forces Between Functionalized Silica Nanoparticles
63t
An Analysis of Biodiesel Production by Continuous Supercritical Methanol Reaction
90b
The Constrained Vapor Bubble Experiment for ISS – Earth's Gravity Results
420e
Electrospinning Route to Fabricate Metal Oxide Nanofibrous P-N Junction Structures
20c
Integration of Industrial Scale Processes Using Biomass Feedstock in the Petrochemical Complex of the Lower Mississippi River Corridor
121d
Exergy Analysis for Biofuel Production
274c
Education Modules for Teaching Sustainability in An Mass and Energy Balance Course
714b
Multistage Stochastic Optimization with Recourse in Batch Plant Scheduling
714d
Comparison of Probability Bound Analysis and Information Gap Methodologies for the Sustainability of Industrial Ecosystems
482e
Imaging Lipid Distribution within Lipid Membranes Using Nanoscale Secondary Ion Mass Spectrometry
64a
Optimization of Eu:TiO2 Nanoparticles for Aqueous Systems Applications
620d
Development of Pd-Alloy Composite Membranes for Hydrogen Separation
645c
Binary Combinations of Lipid-Like Materials for siRNA Delivery
443a
Modular Tissue Engineering System for Characterization of Oxygen Gradients, hMSC Differentiation, and Pre-Vascularization
252f
A New Model for Capturing the Effect of Supersaturation On Crystal Shape
190c
Surface Enhanced Raman Scattering Based Biomolecular Sensing Techniques in Optofluidic Device
38e
Hydrolytically Degradable Beta-Cyclodextrin-Based Nanoparticles Bearing Quaternary Amine Groups for Drug Delivery Across the Blood-Tissue Barriers
348b
Transforming Growth Factor beta1 Releasing Degradable Nanogels for Chondrogenic Differentiation of Human Mesenchymal Stem Cells
485bk
Reversing Retinal Cell Death in Diabetic Rats' with Subconjunctivally Implanted Hydrogels
327d
Enhanced Mucoadhesive Capacity of Novel Copolymers for Oral Protein Delivery
489j
In Vivo Analysis of Pnipaam-PEG, An Injectable Scaffold for Spinal Cord Repair
535a
Receptor-Mediated Transport of Nanoparticles for the Oral Delivery of Therapeutic Proteins
496e
Numerical Estimates for CO2 Leakage through Geological Seals Considered for Saline Reservoir Sequestration of Carbon Dioxide
132a
Soy-Based Oligomeric Polyols with Reduce Isocyanate Loadings
581e
Ellipsometry Measurements of Glass Transition Breadth in Gradient, Block and Random Copolymer Bulk and Thin Films
141g
Modulating DNA Adsorption On Silica Beads in An Electrically Actuated Microfluidic Device
208b
Flow-through Electroporation for Large-Volume Transfection of Cells
391f
Nucleocytoplasmic Trafficking of NF-κB Studied by Microfluidic Electroporative Flow Cytometry
416i
Enhanced Gene Delivery by Transverse Cell Migration During Flow-through Electroporation
501d
Total Internal Reflection Fluorescence Flow Cytometry
592e
Production of Butanol From Corn Fiber Hydrolysate by Clostridium Acetobutylicum in a Fibrous Bed Bioreactor
116i
Study On Three-Phase Flow Behavior Under Electromagnetic Field
62e
Microfluidic Chamber Array for High-Throughput Chemical Screening
240h
Microfluidic Chamber Array for Continuously-Perfused Cell Culture and Assay
306f
Pressure Measurement in Microsystems Using Volume-Displacement of Nanoparticle Suspension
501c
A Microfluidic Migration Assay for Single-Cell Tracking in Well-Controlled and Non-Flowing Gradient Fields
196f
Hot-Water Extraction of Aspen Woodchips Prior to Pulping
634b
Effects of Two-Stage Semi-Continuous Culture and CO2 Aeration On Cell Growth and Lipid Accumulation of Nannochloropsis Oculata
480e
Interfacial Structure and Interactions in Clay-Polymer Nanocomposites
637a
High-Temperature Stable Metal-Silica Core-Shell and Yolk-Shell Materials with Exceptional Dimensional Control
103g
A Cost-Effective Supercapacitor Material of Ultrahigh Specific Capacitances: Spinel Nickel Cobaltite Aerogels From An Epoxide-Driven Sol-Gel Process
487k
Support Effect On the Low-Temperature Hydrogenation of Benzene Over PtCo Bimetallic Catalysts
510e
Novel Microfibrous Composite Bed Reactor Incorporated with Silver Catalyst for High Efficiency Gas-Phase Oxidation of Alcohols
257e
Protein-Polymer Core-Shell Nanoparticles as Non-Viral Gene Delivery Vehicles
132a
Soy-Based Oligomeric Polyols with Reduce Isocyanate Loadings
380a
A Global Terrain Approach to Distillation Design Feasibility
407d
DataNet Opportunities for Process Systems and Chemical Engineering
422d
Large Time Scale Conformation and Phase Transition Dynamics
491d
Iteratively Refined Distillation Line Methods
491o
Coupling Bulk Phase Thermodynamic Constraints and Molecular Simulations
227c
Technology Challenges for Sustainable Energy Solutions – Battelle’s Perspective
138a
Bio-Nanocomposite Catalysts for Direct Electron Transfer in Bio-Electrochemical Systems
409b
Functionalized Alumina Particles as pH-Responsive Drug Carriers
363d
Supercritical Carbon Dioxide: A Promising Green Solvent in One-Pot Synthesis of ZrO2-TiO2 Nanotubes
495a
Measurement and Modelling of Dynamic Adsorption Behavior of VOCs IN METAL-ORGANIC Framework (MOF) Packed Beds
554c
Solubility of CO2 in CO2-Philic Oligomers, Including PPGDME, PDMS and PFPE
403b
Crosslinking Metal Manoparticles Into the Polymer Backbone of Hydrogels Enables Preparation of Soft, Magnetic Field-Driven Actuators with Muscle-Like Flexibility
533e
A Novel Route to Access Metal-Metal Nanocomposites: Bismuth-Cobalt as a Low-Friction Material
622b
Permanent and Patterned Adjustment of the Surface Potential of Graphene-Like Carbon through Chemical Functionalization
520c
The CO2 and H2 Permeability of Membranes Composed of Polyfluoroacrylate, Perfluoropolyether (PFPE), PFPE-Plasticized Amorphous Teflon, and Polyfluoroalkoxyphosphazene
458a
Liquid Flame Spray Deposited Nanocoatings On Painted Metal
587b
Numerical Simulation of Gas Flow in Segmented Catalytic Converters
239c
Lignocellulosic Biomass to Ethanol: Process Design and Economics for Corn Stover
84c
Investigation of the Carbon Nanotube Interfacial Tailoring Effects On the Mechanical and Viscoelastic Properties of Carbon Nanotube Epoxy Nanocomposites
144b
Coffee Grounds for the Generation of Energy
60g
Toxicity of Nanoparticles: Cerium and Hafnium Oxides
420b
Catalytic Properties of Dendron-Ordered Mesoporous Silica Nanocomposites
371j
The Effects of Viscosity and Surfactant Concentration On Two Phase Flow in a T-Junction Microfluidic Device
253g
Inactivation of Persister Cells by Low-Level Direct Currents
263f
Molecular Mobility in Self-Assembled Dendritic Chromophore Glasses
642d
Characterization and Application of Noninvasive Optical Sensors for Online pH and Dissolved Oxygen Monitoring in Mammalian Shake Flask Cultures
577f
Using Nanotechnology to Improve the Water Solubility and Bioavailability of Health Care Products-Soy Isoflavones
331f
Understanding Nanoparticle Diffusion and Exploring Interfacial Nanorheology Using Molecular Dynamics Simulations
5aj
High Capacity Silicon Anode Composite for Li-Ion Battery and Novel Anion Conductive Membrane for Alkaline Fuel Cell
127g
Applying the “DNA Assembler” Approach to Study Natural Product Biosynthetic Gene Clusters
257f
Efficient RNA Interference by Intracellularly Targeted and Enhanced Release of siRNA by Acid-Degradable Linear Polyethylenimine: In Vitro and In Vivo Evidence
469c
Heat Pump Cycles to Generate Electricity From Low Temperature Waste Heat
152c
Wrong-Way Behavior of Diesel Particulate Filters
63e
Biodiesel Synthesis, Characterizaton and Emissions Testing Using Chromatographic Methods
105a
Poly(ethylene oxide) Nanotubes From Electrostatic Layer-by-Layer Assembly
380f
A Systematic Methodology to Synthesize and Design Processes, Incorporating Process Intensification
646b
Expediting the Wound Healing Process Using An Improved Alginate Wound Dressing
21e
Method for Evaluating Single-End Control of Distillation Columns
101c
IGCC Dynamic Model: H2S Absorption/Stripping, WGS Reactors, and CO2 Absorption/Stripping
271c
A Two-Stripper/Decanter Flowsheet for Methanol Recovery in the TAME Reactive-Distillation Process
322g
A New Control Structure for Divided-Wall Columns
459c
Control of a Column/Pervaporation Process for Separating the Ethanol/Water Azeotrope
586c
Effects of N and C Sources On Growth, Chlorophyll a, Lipid and CO2 Biofixation for Chlorella Vulgaris
125b
Effects of Nitrogen Source and Concentration On the Production of Fatty Acids in Heterotrophic Chlorella Protothecoides
155c
A Model for Gas-Liquid Contact in Stirred Vessels
408c
The History of Multiphase Computational Fluid Dynamics
226a
Reimagining Agriculture to Accommodate Large Scale Energy Production
417d
An Integrated High-Throughput Experimentation and Semi-Empirical Modeling Approach to Building Process Knowledge in Pharmaceutical Process Development
347e
Macrophage Interrogation of PEG-Based Hydrogels Used in Tissue Engineering Applications
257g
Surface-Mediated Release of siRNA From Polyelectrolyte Multilayers Fabricated Using Degradable Polyamines
557c
Stent-Mediated Delivery of DNA to Arterial Tissue Using Intravascular Stents Coated with Ultrathin DNA-Containing Polyelectrolyte Multilayers
645d
Transdermal Delivery of DNA and Protein Using Stainless Steel Microneedle Arrays Coated with Ultrathin Polyelectrolyte Multilayers
65at
Micro-Scale Effects On the Wettability of Electrospun PVP-Titania Fiber Mats On ITO Substrates in Aqueous Media
397c
PyRosetta: An Interactive Platform for Teaching Protein Structure Prediction and Design
![[ Visit Client Website ]](images/banner.gif)