Author Index: B

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Baez, J.
57a Interfacially-Active Nanohybrids for Improved Oil Recovery
87b Evaluation of Molecular Dynamics Simulation of Polyaniline Nanostructure Film with the Experiments
104bq Early Lessons From PSM Implementation
Bailey, W.
32c “Steady-State Multiphase Flow Modeling – Past, Present and Future with a Flow Assurance Perspective”
Baird, L.
62b Pyrolysis Oil and Its Applications
Baker, Q. A.
133a “Guidelines for Evaluating Plant Buildings for Fire, Explosion, and Toxic Releases—2nd Edition”
60d Energy Efficiency and Cost Saving Economy(Pre and Post War) In Libyan Oil Refineries
Balachandran, U.
51b Hydrogen Membrane Technology for Ethylene Production
Balan, P.
61a The NSF Small Business Innovation Program – the Search for Transformational Technologies
Baled, H.
88b Volume-Translated Cubic Eos and PC-SAFT Density Models and a Free Volume-Based Viscosity Model for Hydrocarbons At Extreme Temperature and Pressure Conditions
Bamgbade, B.
88b Volume-Translated Cubic Eos and PC-SAFT Density Models and a Free Volume-Based Viscosity Model for Hydrocarbons At Extreme Temperature and Pressure Conditions
Bamufleh, H.
86e Move to Atomic and Renewable Energy in An Oil Exporting Region?
Bandari, B.
25b Fuel Gas System Design – Key to Reliable and Efficient LNG Plant Operation
Banerjee, S.
143a Cationic Polyelectrolytes Decrease Gelatinization Temperature of Cornstarch
99c Fire From Iron
147d Fatal Exposure: Tragedy At DuPont
Bao, B.
137d Conceptual Design and Integration of XTL Plants
Baranov, I.
141a Innovative Hydrocavitation Technology Process to Create Composite Fuels
110a Methodology for Evaluation of Management of Safety Barries for Major Hazard Accidents
112b International Comparison on the Application of Societal Risk Criteria
Bare, S. R.
138d Structural Characterization of Lanthanide Promoted Sulfated Zirconia Catalysts
111b Using LOPA to Establish SILs for Power Outage Protection
134c Using LOPA to establish SILs for Power Outage Proteccion- Spanish
10b Structure of Process Safety in the Operating Plants – Leaders of Management and Analysis of Risks and Impacts
113b Major Turnaround in An Olefins Plant: A Process Safety Point of View
41c Social HAZOP At Oil Refine Industry
104ah Human and Social Risk Preliminary Analysis (HS-RPA), a Case At PLG Site
Barrufet, M.
88e A Generalized Partial Molar Algorithm Provides Fast Estimates of CO2 Storage Capacity in Depleted Oil and Gas Reservoirs
Bartusiak, R. D.
50b An Improved Approach for Online Optimization of Large-Scale Process Facilities
106l Dynamic Operational Risk Assessment with Bayesian Networks
Basden, M.
55b The Impact of Joint Rotation Angle on the Performance of Mellapak N250Y
Basu, A.
81c UCSRP: A Flexible Sulfur Removal Process for Sweetening Natural Gas
85a Temperature Control of Drilling Fluid with Phase-Change Materials
67d An Innovative Mixed Zinc Oxide Based Sorbent Regenerable At Low Temperature for the Desulfurization of Syngas in IGCC or XTL Processes
114d An Innovative Mixed Zinc Oxide Based Sorbent Regenerable At Low Temperature Used for the Desulfurization of Syngas in IGCC or XTL Processes
25a Mixed Fluid Cascade, Experience and Outlook
67d An Innovative Mixed Zinc Oxide Based Sorbent Regenerable At Low Temperature for the Desulfurization of Syngas in IGCC or XTL Processes
114d An Innovative Mixed Zinc Oxide Based Sorbent Regenerable At Low Temperature Used for the Desulfurization of Syngas in IGCC or XTL Processes
Beasley, K.
153c Furnace Stories
Beckman, D.
115a Best Practices in the Design and Fabrication of Pilot and Demonstration Plants
Becu, O.
122e Modeling of Ground Flare Pits
15b Look Ma No Faceplates: Benefits of In Situ Modification of Set Point and Output
84a Eliminating Difficult Start Ups with State Based Controls
98a The Connection of Peak Alarm Rates to Plant Incidents and What You Can Do to Minimize
44c Deriving Major Accident Failure Frequencies with a Storybuilder Analysis of Reportable Accidents
Belue, J.
89b Absorption Refrigeration for Auxiliary Applications in LNG Plant
Benaissa, W.
17a A Mechanistic and Experimental Study of the Diethyl Ether Oxidation
104g Optimal Layout of Gas Detector Networks: A Comparison Study
Bennett, R. H.
133a “Guidelines for Evaluating Plant Buildings for Fire, Explosion, and Toxic Releases—2nd Edition”
Berg, J.
25f Maximizing LNG Capacity for Liquefaction Processes Utilizing Electric Motors
48b Process Plant Safety: An Attorney's Perspective on Key Legal and Regulatory Issues
96d Root Cause Study of Debutanizer Column Operational Upsets
104bd Multi-Objective Optimization of Hazardous Substance Storage Facilities. the Decision Between Risks and Costs Associated to the Project
104bm Design Optimization of Storage Facilities Taking Into Account the Domino Effect
Berry, G.
38c Operations Management Panel Discussion
Berthiaux, H.
82e Experimental Investigation of the Scale up of Turbula Mixers on the Basis of Kinematic and Dynamic Similarities
50e Operator Training Simulators - Nova Chemicals' Experience for Training, Certification, and Other Applications
86b Profitability Through Lean Six Sigma
Bhat, G.
38b How to Structure a Basic Care Strategy for Rotating Equipment
Bhatelia, T. J.
59e Comprehensive Kinetic Model for Fischer-Tropsch Synthesis Over a Re-Promoted Co/Al2O3 Catalyst
Bhatnagar, G.
View Modeling Shallow Pore Water Chemistry As a Proxy for Methane Hydrate Abundance In Marine Sediments
60e Platformer Debutanizer Revamp & Optimization
145f Optimization Tools for Development of Unconventional Natural Gas Resources
119e CDU Preheating Train Retrofit Keeping Heat Exchangers Network Topology
Bichraoui, N.
21a Application of Agent-Based Modeling (ABM) of An Integrated System Modeling Framework for Designing a Sustainable Industrial Park
116b Teaching Life Cycle Sustainability Assessment Via Online Course
Bikkina, P.
108d Effect of Process Parameters on Dispersion Characterization of Crude Oil-Water/Brine Emulsions
Bilaus, R.
60e Platformer Debutanizer Revamp & Optimization
29c Useful Tips for Optimal Fired Heater Performance
Biswal, S. L.
126a Experimental and Simulation Studies of Foam in Porous Media At Steady State
59a Sodium Plus Sulfur Promoted Supported Iron Catalysts for the Selective Production of Lower Olefins From Synthesis Gas
104ax Back to Basics
104bj Preparedness for the Initial Moments of a Process Safety Incident
Bolivar Solano, S. Sr.
145e Method of Measurement of Carbon Permittivity
Bortsie Aryee, N. A.
120c Using System Dynamics to Support Consequential Life Cycle Analysis: The Forest Based “Drop-in” Biofuel Supply Chain Example
Bortsie-Aryee, N.
120e Advancing Computational Modeling and Analysis for Assessing Sustainability of Large Scale Bioenergy Production
Bou-Mikael, S.
57c Rock-Based Micromodel and CFD Studies of Nanomaterial Transport for Reservoir Applications
Bouquet, J. S.
91d The Reaction Pathways of Glycerin in Supercritical Water
Boutin, O.
62a Biomass to Oil : Fast Pyrolysis and Subcritical Hydrothermal Liquefaction
Bowlin, R.
51c Microwave Enhanced Direct Cracking of Ethane for Production of Ethylene
Boyd, A. C.
64g An Evaluation of Pyrolysis Oil Properties and Chemistry As Related to Process and Upgrade Conditions with Special Consideration to Pipeline Shipment
92g Massively Parallel Simulation of Field-Scale Oceanic Gas Hydrate Deposits
113a Process Safety Management Plus or Minus 20 Years - What I Wish I'd Known 20 Years Ago and What We Can't Wait Another 20 Years to Learn
Bradley, S.
138c Impact of Silica on the Performance of Reforming Catalysts
49b Safety Management System Challenges for Small Companies
73c “Bridging SEMS Between the Owner, Operator, and Contractor”
Brege, J.
28d Efficient Displacement of Synthetic or Oil-Based Mud and Transitional Phase Inversion
Bresland, J.
42a Learning from Major CSB Investigations
Bridges, B.
78a Gains From Getting near Misses Reported
111a Impact of “Guidelines for Independent Protection Layers and Initiating Events”
41a Human Factors and Their Optimization
104x PFD for SIF: Accounting for Systemic Human Error in SIS
Bringedal, B.
56e Designing and Delivering Integrated Control, Monitoring and Optimization Systems for Subsea or Topside Systems
Britton, C.
126b Chemically Enhanced Oil Recovery: Novel Surfactants - the Concept of Large Hydrophobe Alkoxy Carboxylate Surfactants
132a Two Incompetent Workers; Too Close for Comfort – Part 1
106k Thermal Inbreathing Requirements of Low Pressure Storage Tanks At Elevated Temperatures
35b Advanced Pipeline Monitoring for Flow Assurance with Fiber Optics
153e Emissivity of Cracking Furnace Coils, Novel Temperature Measurement Solutions for Cracking Furnaces
Browne, R. J.
6d Aqueous Solubility of Binary and Multicomponent, Tarlike PAH Mixtures
101a Identification of Process Hazards in Laboratories and Pilot Plants
85a Temperature Control of Drilling Fluid with Phase-Change Materials
Buchholz, S.
20a Implementation of Process Intensification and Flow Chemistry
Buchlin, J. M.
45a BLEVE Overpressure: Small Scale Experiments and Multi-Scale Comparison with Literature Survey of Blast Wave Modeling
Buckley, J.
58b Asphaltenes Deposition
59e Comprehensive Kinetic Model for Fischer-Tropsch Synthesis Over a Re-Promoted Co/Al2O3 Catalyst
Bullough, B. D.
101b Challenges in Applying PSM to Production Pilot Plants & Laboratories
Bunting, B. G.
64g An Evaluation of Pyrolysis Oil Properties and Chemistry As Related to Process and Upgrade Conditions with Special Consideration to Pipeline Shipment
148c Do We Have New Solutions to the Old Problem of Gas Hydrates?
Burgess, W. A.
88b Volume-Translated Cubic Eos and PC-SAFT Density Models and a Free Volume-Based Viscosity Model for Hydrocarbons At Extreme Temperature and Pressure Conditions
73b Process Safety Regulations - Blessing or Curse?
Butle, M. K.
150e Overview of a NOx Wash of the Cryogenic Section of An Ethylene Plant
54a Determining the Rate of Biodegradation in Fuel Impacted Karst Aquifers
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z