Start | Grid View | Browse by Day OR Group/Topical | Author Index | Keyword Index | Personal Scheduler

Author Index: S

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Sabatini, D.
28e Mass Transfer Effects in Bore-Hole Filter-Cake Cleanup
Sadd, V.
61c Leveraging Open Innovation - Experiences in the Small Business Universe
Sadler, C.
60b Refining & Petrochemicals – Technology Solutions Through Integrated Optimization
Sáenz, M. G.
99c Fire From Iron
147d Fatal Exposure: Tragedy At DuPont
Safari, I.
54c A Combined Cost Model to Evaluate the Economic Impact of Degraded Water Use in Thermoelectric Cooling Loops
Safari, I.
54b Prediction of Condenser Fouling in Thermoelectric Power Plant Cooling Systems
Salager, J. L.
28d Efficient Displacement of Synthetic or Oil-Based Mud and Transitional Phase Inversion
85d Transforming An Emulsified Drilling Fluid to Be Removed From Unwanted Location Into a Low-Viscosity Single Phase System
123c Emulsion Stabilization, Breaking and Inversion: Advantage or Disaster in Flow Assurance
Salari, T.
96e Dissolved Oxygen Content Measurement in Aqueous and Hydrocarbon Liquids
Salbidegoitia, I.
91a Operations Optimization of Concentrating Solar Power Plants. I: Challenges and Opportunities
Salter, J.
136a Managing Societal Risk by Considering Simultaneous Operations Early in Project Development
Sambath, K.
107c CFD Modeling of Electrically-Enhanced Oil-Gas Separators
Sames, J.
34g Sulfur Recovery and Tail Gas Treating Process Gas Analyzers, Stigma, Sins and Salvation
Sánchez Correa, C. A.
94g Design of Distillation Columns for Ternary Heterogeneous Azeotropic Mixtures by Geometrical Methods
Sanders, R. E.
16c Applying MOC as Integral Part of Process Safety Management
Sandhu, S. S.
33d Model Formulation and Simulation of a Solid-State Lithium-Based Cell
Sankey, D.
97c Cracking Furnace Gasket Selection – A Key Factor in Furnace Life Extension
153e Emissivity of Cracking Furnace Coils, Novel Temperature Measurement Solutions for Cracking Furnaces
Santana, J. C. F. D.
104bs Gas Detection Management in Petrochemical Plant
Saqlain, C. J.
104ay Safety and Safety-Instrumented System (SIS)
Saraf, S.
40a Ensuring HAZOP Quality
Saraiva, M. C.
46b Operational Group for Process Safety
Sare, R. H.
150e Overview of a NOx Wash of the Cryogenic Section of An Ethylene Plant
Sarica, C.
32e High-Viscosity Oil Multiphase Pipe Flow
58c Review of Paraffin Deposition Under Multiphase Flowing Conditions
Sarkar, P.
104bp Quantitative Risk Assessment Study of Hydrogen Cyanide handling areas of Acrylonitrile Plant
Saud, Y.
46a Applications of Cause-Consequence Diagrams in Operational Risk Assessment
Saura, M. B.
104bb Matrix Approach to Streamlining HAZOP Studies for Complex, Multi-Mode Systems
Sawyer, R.
104aa Industry and Regulators Working Together in Preventing Accidents
Schael, F.
83a Intensify Process by Efficient Micromixing
Schell, D. J.
82a NREL's Integrated Biorefinery Research Facility - Pilot Scale Risk Mitigation
Scher, E.
51a Natural Gas to Ethylene in One Step- Siluria Technologies' OCM (Oxidative Coupling of Methane) Process
Schmidt, S.
96e Dissolved Oxygen Content Measurement in Aqueous and Hydrocarbon Liquids
Schnobel, M.
150d NOx Risk Mitigation for the Co-Feeding of Natural Gas to the Sasol CTL Complex
Schork, J. M.
109a Modeling of Underground Hydrogen Pipelines
112c Societal Risk Criteria and Pipelines
Schröder, D. V.
104aq Release and Dispersion of Heavy Gases - Experimental Results and Numerical Simulations
Schuenemann, T.
View Strategic Chemistry
Schultes, M.
124f The Influence of Low Surface Tension on the Performence of Mist Eliminators
Schultz, D.
90a Nanotechnology Enabling Composites: Superhydrophobic Surfaces to Electrical Transparent Conductors
105m Nanotechnology Enabling Composites: Superhydrophobic Surfaces to Electrical Transparent Conductors - Poster
Schwegler, B.
View Divided Wall Column for Industrial Multi Purpose Use
Sciallo-Tyler, L.
99c Fire From Iron
147d Fatal Exposure: Tragedy At DuPont
Sears, S. Sr.
View Strategic Chemistry
Sengebusch, A.
35c Real-time Monitoring of a Subsea Boosting System
Sepeda, A.
133a “Guidelines for Evaluating Plant Buildings for Fire, Explosion, and Toxic Releases—2nd Edition”
Serban, M.
138c Impact of Silica on the Performance of Reforming Catalysts
138e Molecular Modeling and New Naphtha Reforming Catalysts
Sethi, N.
39f Operation and Maintenance of Environmentally Critical Process Analyzers
Setiawan, M. A.
89a Increasing Propane Desuperheater and Condenser Reliability in PT Badak NGL
Shafer, W. D.
59b Hydroisomerization of n-Hexadecane Over Anion Modified Pt/HfO2 Catalysts
95b The Effect of Chain Length of Feed on Hydrocracking Over Pt/SiO2-Al2O3 Catalyst
95d Oxygenate/Hydrocarbon Distribution Compared Across Different Group I Promoters for Iron Catalysts
Shah, J.
112a Understanding and Developing Quantitative Risk Criteria
Shang, Y.
33e Study on Particle Sizes for Graphite/Polyphenylene Sulfide Composite Bipolar Plates for Vanadium Redox Flow Battery
Sharma, B.
81b Design Approaches for Unconventional Gas Processing
Sharma, G.
126d Chemical EOR by Wettability Alteration
Sharma, K. R.
87e On Evaluation, Prevention and Repair of Microbial Acid-Produced Attack of Concrete
116c On Instruction of Statics and Dynamics to a Large Class
149d On Stability, Dynamics of Lunar Oxygen Production From Ilmenite in a 0.167 G Fluidized Bed
149f On Ultra High Performance Nanostructured Concrete by Polymer Impregnation
Sharma, M. M.
57e New Nano-Particle Based Drilling Fluids
129d Stress Interference Effects in Hydraulic Fractures in Horizontal Wells in Shales
Sharma, P. K.
120a A Life Cycle-Based Analysis and Optimization Framework for Designing Sustainable, Multi-Product Biomass-to-Bioproducts Value Chains
120b Simulation, Optimization and Costing of a Fully Integrated Multi-Product Biorefinery
Sharpe, L.
54a Determining the Rate of Biodegradation in Fuel Impacted Karst Aquifers
Shatto, D. P.
148b Field Results for Slurry Flow
Shea, R.
56a Quantifying Flow Assurance Risks During Front End Engineering Design
Shekiro, J.
82a NREL's Integrated Biorefinery Research Facility - Pilot Scale Risk Mitigation
Sheldon, S.
46a Applications of Cause-Consequence Diagrams in Operational Risk Assessment
Shen, N.
View Acetylene Converter Safety Systems
Shen, R.
6e A Modeling Study of the Transient Process of the Fate and Transport for Vapor Intrusion
Sheth, C.
133c Enhancing Fire Risk Evaluations of Offshore Platforms Using Finite Element Analysis
Sheth, K. R.
50b An Improved Approach for Online Optimization of Large-Scale Process Facilities
Shi, L.
128e Analysis of the transfer and distribution of sulfur in the typical refinery
Shi, S.
151e Methylchlorosilane Distillation System: Comparison of Existing Processes and Novel Parallel Double-Effect Counterparts by Simulation
Shi, W.
123b The Role of Scale in Flow Assurance
Shiau, B. J.
57a Interfacially-Active Nanohybrids for Improved Oil Recovery
85c Aqueous Polymer-Surfactant Mixtures for Wellbore Treatment and Completion
Shiau, L. D.
118c Separation of the Cresol Isomers by a New Technique Combining Distillation and Crystallization
Shih, S.
65d Green Diesel Production - An Overview
121c Hydroprocessing Design - Tutorial
Shimura, M.
24c CO2 Reforming for Variable Chemical Process
Shippen, M.
32c “Steady-State Multiphase Flow Modeling – Past, Present and Future with a Flow Assurance Perspective”
Shoham, O.
108b On-Line Monitoring of Multiphase Composition Using Differential Dielectric Sensor (DDS)
108d Effect of Process Parameters on Dispersion Characterization of Crude Oil-Water/Brine Emulsions
108e Multiphase Flow in Downcomers and Vertical Separators
Shulman, H.
51c Microwave Enhanced Direct Cracking of Ethane for Production of Ethylene
Sibblies, J.
68c Sustainable Business Operation and Environmental Preservation - the Evolving 21st Century Thinking on the Achievability of Both
Sicker, M.
38c Operations Management Panel Discussion
Siddiq, S.
117d Process Improvement in the Energy Recovery Ammonia Synthesis Reactor of a Solar Thermal Power Plant
Sielegar, D.
144b Modeling Dynamic Heat Transfer in Piping Systems Using An Enhanced ASTM C-680 Algorithm
Sievers, D. A.
82a NREL's Integrated Biorefinery Research Facility - Pilot Scale Risk Mitigation
Silva, D.
43c The CCPS Reactivity Evaluation Software Tool
Siqueira, L.
47c The Importance of SAFETY DESIGN On NEW Refinaries
110c The Importance of SAFETY DESIGN On NEW Refinaries-Portuguese
Siravo, M.
93c Refinery-Wide Topics for Profitability, Reliability and Safety
Skogestad, S.
142a Assessment of Minimum Energy and Operation Flexibility of Complex Dividing Wall Columns by Use of the Vmin-Diagram
151a Control of Kaibel Distillation Column by Estimated Compositions From Temperature Measurements
Slavens, A.
34a All Sulphur Plants Are Not Created Equal
Slupphaug, O.
56e Designing and Delivering Integrated Control, Monitoring and Optimization Systems for Subsea or Topside Systems
Smirnova, A. I.
85a Temperature Control of Drilling Fluid with Phase-Change Materials
Smith, D. J.
104az Pressure Relief System Reaction Forces – the Importance of Evaluating Existing Installations
104m Things Plant Engineers Should Know about Reviewing Relief Valve and Flare Action Items
Smuk, S.
56d Quantifying Asphaltene Impairment Risks During Front End Engineering Design
Snowball, D.
70a Go out and lead on Process Safety Management
Snyder, G.
View Modeling Shallow Pore Water Chemistry As a Proxy for Methane Hydrate Abundance In Marine Sediments
Sochet, I.
104b Detonation of A Gaseous CHARGE In A Confined and SEMI-Confined Workshop
Soczek, C. A.
16b Implementation of a Highly Toxic Materials Management Program
Solairaj, S.
126b Chemically Enhanced Oil Recovery: Novel Surfactants - the Concept of Large Hydrophobe Alkoxy Carboxylate Surfactants
Soliman, M.
104ak Plant Safety Through Process Control
149b Plant Equipment Overdesign
Soong, Y.
24a CO2 Capture Via Potassium Carbonate/MEA Solution
88b Volume-Translated Cubic Eos and PC-SAFT Density Models and a Free Volume-Based Viscosity Model for Hydrocarbons At Extreme Temperature and Pressure Conditions
Soto, F. A.
91c DFT Study on Hydrogen Desorption From NaMgH3 (001) Surface
Souza, A. L. D.
118a Simple and Effective Vapor Feed Distribution In A Bottom Stripping Section of a Crude Oil Column
Souza, E.
28a R&D Efforts to Control, Monitor and Identify Drilling Fluid Invasion in Reservoir Rocks
Sparks, D.
137b Comparing the Performance of Compact Heat Exchange Reactor to CSTR for Fischer Tropsch Synthesis
Sparks, D. E.
59b Hydroisomerization of n-Hexadecane Over Anion Modified Pt/HfO2 Catalysts
Speed, T. C.
104bx Regulatory Compliance for New Energetic and Hazardous Materials
Spooner, B.
34b Increasing CO2 Slip Though An Amine Based Tail Gas Treating Unit
Sposito, N. H.
14a Inter-Linkages Between Process Safety and APELL for Accident Prevention and Preparedness
134b Inter-linkages between Process Safety and APELL for Accident Prevention- Spanish
Spuhl, O.
25d Demonstration Test Result of High Pressure Acid-Gas Capture Technology (HiPACT)
Srinivas, G.
139a Hydrogen Generation From Heavy Oil
St-Cyr, L.
89c Work Output of Multicomponent LNG Mixtures in Two-Phase Expanders
Staak, D.
View Divided Wall Column for Industrial Multi Purpose Use
Stankiewicz, A.
142b Experimental Evaluation of a Concentric Tray HIDiC Performance
Stante, M.
96d Root Cause Study of Debutanizer Column Operational Upsets
Stauffer, T.
98c Using Alarms As a Layer of Protection
Steele, P.
65b Novel Olefination Method to Produce Boiler Fuel From Biomass Derived Bio-Oil
Stewart, N.
56c Integrating Life Cycle Dynamic Simulation and Training for Efficient Design, Startup, and Operation
Storkaas, E.
56e Designing and Delivering Integrated Control, Monitoring and Optimization Systems for Subsea or Topside Systems
Stough, J.
104ae Using Research-Vetted, Actionable Leading Indicators to DRIVE Safety Performance and Operational Excellence
Strashok, R.
50f Preserving Feed Composition Effects Downstream of An Open Level in a DMCplus Controller
Study, K.
135c More LOPA Misapplied: Common Errors and How to Avoid Them
Su, P.
109b Pilot Testing of Fire Protection in Extremely Corrosive Industrial Duct Environments
Subramani, H. J.
32d : Characterization of Confidence in Multiphase Flow Predictions
Sugavanam, K.
25d Demonstration Test Result of High Pressure Acid-Gas Capture Technology (HiPACT)
34c Selective H2S Removal: Case Studies by Using a New Promoter System in Amine Systems
Sullivan, D. K.
138b Light Naphtha Isomerization Chlorided Alumina Catalyst Deactivation
138d Structural Characterization of Lanthanide Promoted Sulfated Zirconia Catalysts
Sum, A. K.
148d Developing a Comprehensive Transient Hydrate Formation Model: From Laboratory to Field Applications
Summers, D. R.
30a AIChE Column Performance Evaluation Guidelines
Summers, D. A. E.
132b Working Under Pressure (How do you manage pressure hazards?)
Sun, H.
28c Using Polymer Elasticity to Scale up Lab Characteristics to Field Applications of Friction Reducers
Sun, J.
142g Simulation and Optimization of Rectisol Using Revised Thermodynamic Methods
151e Methylchlorosilane Distillation System: Comparison of Existing Processes and Novel Parallel Double-Effect Counterparts by Simulation
Sun, Y.
63g Optical Fiber Reflectance Probe for Detection of Supercritical Transition
Sundberg, A.
82d A Small-Scale Pilot Plant Study of the Synthesis of Tert-Amyl-Ethyl-Ether
Sung, J. K.
152b Service Life Prediction of 9% Ni Steel LNG Storage Tank Using Fatigue Analysis
Sutton, I.
70c Taking a Risk for Safety
106h Down the Hubbert Curve
Suuberg, E. M.
6d Aqueous Solubility of Binary and Multicomponent, Tarlike PAH Mixtures
6e A Modeling Study of the Transient Process of the Fate and Transport for Vapor Intrusion
Swanson, J.
39e Considerations for Flare Gas Recovery Unit Design and Operations in An Olefins Plant
Szczepanski, R.
88f Integrated Equation of State Modelling for Flow Assurance
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z