Author Index: M

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Ma, K.
126a Experimental and Simulation Studies of Foam in Porous Media At Steady State
Ma, T.
9b New Correlations for Predicting Flammability Limits of Pure Materials and Mixtures
Ma, T.
151e Methylchlorosilane Distillation System: Comparison of Existing Processes and Novel Parallel Double-Effect Counterparts by Simulation
Ma, W.
59e Comprehensive Kinetic Model for Fischer-Tropsch Synthesis Over a Re-Promoted Co/Al2O3 Catalyst
95b The Effect of Chain Length of Feed on Hydrocracking Over Pt/SiO2-Al2O3 Catalyst
Ma, Y. H.
125e Performances and Stability of Pilot Scale Composite Pd and Pd-Au Membranes in Actual Coal Derived SynGas
MacDonald, A.
97d Inspection and Detection of CUI
71a Comparing PHA Review Techniques - A Case History on Review Meeting Dynamics and Missed Hazards
74c Use PFFM Instead of Hazop
10b Structure of Process Safety in the Operating Plants – Leaders of Management and Analysis of Risks and Impacts
Machiela, D.
73b Process Safety Regulations - Blessing or Curse?
44a Assimilating Design Formulation and Design Review Into a HAZOP (For certain types of capital projects, it will happen anyhow, so structure the HAZOP and plan for it)
71c Practical Approach to Vendor Package HAZOP Studies and Preparing the Package Vendor for the Ordeal
111c Using the Integrated Hazard and Operability Study (HAZOP) Study / Layer of Protection Analysis (LOPA) Methodology As a Value Engineering Tool
104bb Matrix Approach to Streamlining HAZOP Studies for Complex, Multi-Mode Systems
Mahon, K.
94d Application of Ultra High Capacity Shell ConSep* Tray for De-Bottlenecking of a Crude Distillation Unit
23c Developing An EMS to Track Compliance with MSS Activities
6a Ethanol Oxidation Model for Pt2/Ru2/Sn
33a Anode Characteristics of MDH-Catalyzed Bio-Fuel Cell: A Multi-Scale Modeling Study
91c DFT Study on Hydrogen Desorption From NaMgH3 (001) Surface
94d Application of Ultra High Capacity Shell ConSep* Tray for De-Bottlenecking of a Crude Distillation Unit
Mallinson, R. G.
37b The Synergism of Natural Gas Conversion with Biomass for Maximizing Biofuels Production
137a Catalytic Strategies for Upgrading Pyrolysis Vapors
Malone, D. P.
104ao Using a Process Simulator to Improve Relief System Analysis
ManjalyAnthonykutty, J.
51f Bio-Ethylene Production: Alternatives for Green Chemicals and Polymers
Manjunath, K.
99a Effect of Electrostatic Charging of Dry Combustible Particulates on Fires and Explosions
Mannan, D. M. S.
9a Flammability Limits of HYDROGEN and ITS MIXTURES with Hydrocarbons In AIR AT Atmospheric and SUB-Atmospheric PRESSURES
11a Design - PSM Overview
13a Prediction of Corrosion in Pipes
14c Develop a Human Performance Modeling System for Process Safety Operations
17b Phase Behavior of Poly-Substituted Mono-Nitrated Aromatic Compounds
63f Search of Suitable Halon 1301-Like Fire Suppressants Based on Flame Inhibition Mechanism Understanding
72a Towards Inherently Safer Processes: Alkylation of Isobutane and n-Butene
102a Case Histories and Technology Innovations for StorageTank Loss Prevention
104an Aerosol Flammabiltiy Study of Heat Transfer Fluid: Flammable Regions, Flame Development, and Ignition Delay Modeling
104ap Experimental and Computational Fluid Dynamics (CFD) Studies of Deflagration to Detonation Transition (DDT)
104aw A Study on Oxidation of ETBE by Thermal Analysis
104f Normalization of Process Safety Metrics
104g Optimal Layout of Gas Detector Networks: A Comparison Study
104h Study of the Effects of Obstacles in LNG (Liquefied Natural Gas) Vapor Dispersion Using CFD Modeling
104j Explosibility of Methane-Corn Hybrid Mixtures
106l Dynamic Operational Risk Assessment with Bayesian Networks
144c Theoretical Study of Expansion Foam Application on LNG Pool Using Computational Fluid Dynamics
144e Effect of LNG Chemical Composition on Consequence Assessment
144f Source Term Modeling of Vapor Cloud Formation During a Cryogenic Liquid Spill Based on a Boiling Model by CFD Method
151f A Novel Resilient Process Design of Propylene Hydrogenation Purification by Catalytic Distillation
152c Evaluation of Key Parameters for Designing Effective Water Curtain Systems for LNG Facilities Using Computational Fluid Dynamics
63c Energetic Self Sufficiency: Theory and Application
Manovic, V.
6b CO2 Capture with Modified Lime-Based Pellet Sorbents
44c Deriving Major Accident Failure Frequencies with a Storybuilder Analysis of Reportable Accidents
86a Refining Energy Utilization and CO2 Emissions Modeling
Mardilovich, I.
125e Performances and Stability of Pilot Scale Composite Pd and Pd-Au Membranes in Actual Coal Derived SynGas
Margot, B. H.
150e Overview of a NOx Wash of the Cryogenic Section of An Ethylene Plant
Marin, G.
51f Bio-Ethylene Production: Alternatives for Green Chemicals and Polymers
Marmolejo-Correa, D.
119c Appropriate Placement of Compressors and Expanders
119d Evolutionary Design of An LNG Process Using the ExPAnD Method and a New Graphical Representation of Exergy
Marrelli, J. D.
108b On-Line Monitoring of Multiphase Composition Using Differential Dielectric Sensor (DDS)
Marshall, M.
10c Are Your Credits Worthy?
42c Learning from OSHA Investigations of PSM - regulated Operations
21e ENVIRONMENTAL PERFORMANCE of Products FROM Glycerol Conversion
140c USING PFD Diagrams AS Teaching TOOL for NON Chemical Engineers
139a Hydrogen Generation From Heavy Oil
Martin, T.
145a Prediction of EHS Properties Using T.E.S.T
141b Algorithms for the Automated Generation of Reaction Networks in the Hydroprocessing of Oil Fractions
104bi Reducing the Systemic Risks of Human Error Through Root Cause Analysis
83a Intensify Process by Efficient Micromixing
Masanet, E.
86a Refining Energy Utilization and CO2 Emissions Modeling
71c Practical Approach to Vendor Package HAZOP Studies and Preparing the Package Vendor for the Ordeal
33b Study of Gas Diffusion Layers in Direct Methanol Fuel Cells
33e Study on Particle Sizes for Graphite/Polyphenylene Sulfide Composite Bipolar Plates for Vanadium Redox Flow Battery
7b Automotive Emissions and Regulations Overview of U.S., European, Asian, and Global Standards
151d Optimization of a Supersonic Ejector Coupled with a CFD Analysis
Matza, S.
23b Reducing Personnel Exposure to H2S
27d Industrial Test Trials with Membrane Distillation
Mauviel, G.
62a Biomass to Oil : Fast Pyrolysis and Subcritical Hydrothermal Liquefaction
Maxey, J.
28b Comparative Analysis of Gelled Fluids Through Large Amplitude Oscillatory Shear Rheology (LAOS)
Maxwell, K. E.
143a Cationic Polyelectrolytes Decrease Gelatinization Temperature of Cornstarch
82e Experimental Investigation of the Scale up of Turbula Mixers on the Basis of Kinematic and Dynamic Similarities
99c Fire From Iron
Mc Cavit, J.
42b Learning from an Industrial Chemical Perspective
101c Investigation and Corrective Actions After An Internal Air Compressor Fire
27b Engineered Osmosis: A Rapidly Emerging Separation Technology Platform
McElfresh, P. M.
28f New Method for Removing Formation Damage with Nanoparticle Dispersions
McHugh, M. A.
88b Volume-Translated Cubic Eos and PC-SAFT Density Models and a Free Volume-Based Viscosity Model for Hydrocarbons At Extreme Temperature and Pressure Conditions
McQuiston, T.
104al Hydrogen Fluoride Alkylation in Oil Refineries: A Survey of Union Safety Representatives
40a Ensuring HAZOP Quality
104bg A Review of Liquid Discharge Models Under Non-Steady or Transient Conditions for More Realistic Predictions of the Magnitude and Impact of Consequences Related with Loss of Containment Events
151d Optimization of a Supersonic Ejector Coupled with a CFD Analysis
Meel, A.
104ag A Comparative Analysis of Two Approaches for Pool Evaporation Modeling: Shrinking Vs. Non-Shrinking Pool Area
Mehlberg, B.
60c Creating Opportunities From Challenges: Maximizing Propylene Yields From Your FCC
Meinhold, P.
61e The Development of An Advanced Biofuel
Melasky, D.
23e Legal Issues for Chemical Engineers
Mendicute, I.
91a Operations Optimization of Concentrating Solar Power Plants. I: Challenges and Opportunities
Meng, Y.
128b The optimum design of LNG tank farm layout
128c Study on performance-based safety spacing between ultra-large oil tanks
Mentzer, D. R. A.
13a Prediction of Corrosion in Pipes
14c Develop a Human Performance Modeling System for Process Safety Operations
Mentzer, R.
104f Normalization of Process Safety Metrics
152c Evaluation of Key Parameters for Designing Effective Water Curtain Systems for LNG Facilities Using Computational Fluid Dynamics
Merkel, T.
61h MTR's Experience with the SBIR Program: The Development of Vapor Separation Membranes
105n MTR’s experience with the SBIR program: the development of vapor separation membranes - Poster
27d Industrial Test Trials with Membrane Distillation
Mezera, A.
114a Advances in FCC Propylene Production and Recovery
Michnovicz, M.
50d On-Line Energy Management System - Round 2
Mickelson, G. E.
138d Structural Characterization of Lanthanide Promoted Sulfated Zirconia Catalysts
Mikuriya, T.
24c CO2 Reforming for Variable Chemical Process
Miller, D. C.
54b Prediction of Condenser Fouling in Thermoelectric Power Plant Cooling Systems
54c A Combined Cost Model to Evaluate the Economic Impact of Degraded Water Use in Thermoelectric Cooling Loops
Miller, D.
117e Heat Integrated Reactive Distillation of Mesityl Oxide Process
143b Cloud Point Studies for Diesel and Jet Fuel Bio-Derived Fuels
79c Relief Design for Laboratories and Pilot Plants
101a Identification of Process Hazards in Laboratories and Pilot Plants
Mohan, K.
126d Chemical EOR by Wettability Alteration
Mohan, R. S.
108b On-Line Monitoring of Multiphase Composition Using Differential Dielectric Sensor (DDS)
108d Effect of Process Parameters on Dispersion Characterization of Crude Oil-Water/Brine Emulsions
108e Multiphase Flow in Downcomers and Vertical Separators
Mohanty, K. K.
92c Production Strategy for Marine Hydrates Reservoirs
126d Chemical EOR by Wettability Alteration
Mojica, J.
35b Advanced Pipeline Monitoring for Flow Assurance with Fiber Optics
Mola, P.
5a Current Manufacturing Processes Utilized to Improve Equipment Reliability and Stability
Molazemi, K.
112b International Comparison on the Application of Societal Risk Criteria
Molter, T.
105e Electrochemistry to Transform Fluids and Power into Higher Value Forms - Poster
Molter, T.
90e Electrochemistry to Transform Fluids and Power Into Higher Value Forms
Mondelo Rodriguez, A.
21d Chemical Degradation of PCE Residues: AN Useful TOOL for ENVIRONMENTAL PRESERVATION
Mongkolsiri, N.
63a Preliminary Technical Feasibility Study Into Effect of Withdrawing Spent Caustic Stream From Existing Activated Sludge Treatment Plant
Monteiro, M.
104by The Use of Mass Spectrometry to Detect Leaks of Flammable or Toxic Elements
85a Temperature Control of Drilling Fluid with Phase-Change Materials
Moon, H.
66d Cost Effectiveness of 2-Row Membrane System for FLNG
43b A Review of IST Feasibility with the Supply Chain of Three Toxic Industrial Chemicals
80a Case Histories on Inherent Safety – Risk Reduction Amid Risk Aversion
Moore, R.
38a Control and Optimization of Refrigeration Compressors Using Process Model Based Control
Moore, W.
31f Heat Exchanger Monitoring with Invensys ROMeo Optimization Software
Moosemiller, M.
133a “Guidelines for Evaluating Plant Buildings for Fire, Explosion, and Toxic Releases—2nd Edition”
Moosemiller, M.
112a Understanding and Developing Quantitative Risk Criteria
143a Cationic Polyelectrolytes Decrease Gelatinization Temperature of Cornstarch
150f Risk Assessment Methodology of NOx in the Cryogenic Section of Ethylene Plants
Morgan, J.
33b Study of Gas Diffusion Layers in Direct Methanol Fuel Cells
92g Massively Parallel Simulation of Field-Scale Oceanic Gas Hydrate Deposits
Morreale, B.
88b Volume-Translated Cubic Eos and PC-SAFT Density Models and a Free Volume-Based Viscosity Model for Hydrocarbons At Extreme Temperature and Pressure Conditions
Morrison, C. F.
26c Technical Support Benchmarking: A 15 Year Historical Perspective
Morrison, T.
2a Overview and Welcome to the 8th Global Congress on Process Safety
43a Thermal Safety of Ionic Liquids
111b Using LOPA to Establish SILs for Power Outage Protection
144d Guidelines for Jetting and Flashing LNG Vapor Exclusion Zone Analysis
Morrow, W. III
86a Refining Energy Utilization and CO2 Emissions Modeling
109c Explosions in Transformer and Circuit-Breaker Tanks Due to Arcing Events
Mosa, F.
26b Lessons Learned From SABIC New Processes Commercilization
26d An Integrated Approach for Chemical Technology Development
Mosca, G.
94d Application of Ultra High Capacity Shell ConSep* Tray for De-Bottlenecking of a Crude Distillation Unit
Mosher, B.
90b Commercial Success in Biomaterials
105j Commercial Success in Biomaterials - Poster
132b Working Under Pressure (How do you manage pressure hazards?)
Moura, P. M.
50c MPC Revamp of Two Naphtha Crackers, Lessons Learned and Relearned
106e Numerical Investigation in Heat Conduction Effect on Heat Exchange for Mini Cross-Flow Heat Exchanger (MCHE)
Mud, M.
44c Deriving Major Accident Failure Frequencies with a Storybuilder Analysis of Reportable Accidents
39b Combustion of Mixtures: A Modified IFC Approach
58f New Asphaltene Nanoscience and Its Impact on Reservoir Characterization
Munn, L.
104v Using Simulators to Teach Process Safety and Operations At Petroplus Coryton
Munoz, F.
104ab Facility Layout Optimization Detailed Research Through MILP and MINLP
104as Methodology for Uncertainty Reduction for FDS Simulations to Obtain Refined Results for Performance-Based Design
139d Beneficial Uses of CO2: Preliminary Framework for Quantifying Impacts
Munteanu, M. C.
60a Optimizing Bitumen Upgrading Scheme – Modeling and Simulation Approach
Murphy, J.
43c The CCPS Reactivity Evaluation Software Tool
111a Impact of “Guidelines for Independent Protection Layers and Initiating Events”
135b Beware of the Black Swan
Murray, S. L.
14c Develop a Human Performance Modeling System for Process Safety Operations
102c Tutorial on Combustible Dust
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z