Author Index: D
Author Index: D
694d
Effect of Layer Density on Irreversible Thermal Expansion and Interlayer Strength in Additively Manufactured Acrylonitrile Butadiene Styrene
262ag
Volumetric, Acoustic and Viscometric Properties of Binary Mixtures of (n-Butylammonium based ionic liquid + Ethanol) at Different Temperatures
108d
An Aging Infrastructure: Policy Recommendations to Modernize Aging Water Distribution Networks to Protect Human Health
46f
A Full Exploitation of the Pulsed Laser Polymerization Technique to Assess All Important Rate Coefficients in Acrylate Radical Polymerization
262q
Development of a Thermodynamic Model for Confined Fluids
378e
A Dilation-Driven Secondary Flow in Sheared Granular Materials, and Its Rheological Signature
767a
Feedforward Control of Continuous Pharmaceutical Manufacturing Process
298f
High Temperature Ultradry Carbon Dioxide-in-Water Foam Stabilized with Viscoelastic Surfactants
534c
Pyrolytic and Electrochemical Upgrading of Lignins Extracted from Pretreated Biomass to Produce Liquid Fuel Intermediates and Value-Added Products
8j
Optimization-Based Quantification of Performance Limits for Process Networks
30d
Modeling and Simulation of Transport Effects to a Single Reactor Pellet
245k
Minimization of Entropy Generation in Multi-Pressure Reactive Distillation Networks
449l
Energy Consumption Minimization in Multi-Pressure Reactive Distillation Networks
417b
Negligible Aging in Poly(ether-ether-ketone) Membranes Widens Application Range for Solvent Processing
742d
Raman Spectroscopy- Towards the Prediction of Quality Attributes and Application in Cell Culture Process Development
253a
Resolving Experimentally-Inferred Solvophobic Interactions in the Overlap Region
View
Thermodynamic Analysis of 1-Cyclhexylpiperidine for SPS FO Water Treatment Processes
617hr
Glycerol Steam Reforming for Hydrogen Production over CoxNiy-MCM-41 and CoxNiy-SBA-15 Catalysts
View
Antimicrobial Peptide Amphiphiles (AMPA) As a Surface Coating for Endotracheal Tubes
691e
Investigation of Continuum Two-Fluid Models in Simulating Fluidised Beds in Openfoam
517h
Using Inelastic Neutron Scattering to Probe the Active Site for Cobalt-Copper Catalyst for the Conversion of Syngas to Higher Oxygenates
212f
Flame Synthesis and High Pressure High Temperature Annealing of Anatase TiO2 for Increased Photocatalytic Activity
28d
Shale Gas Supply Chain Network Design and Operation Incorporating Rigorous Well Simulations
349g
Arrested Coalescence of Viscoelastic Droplets: Restructuring Dynamics
256ak
Morphogen Presentation within Micro-Fiber/Collagen Composites for Ligament Tissue Engineering
610c
A Survey Regarding the Chemical Engineering Curriculum
228v
Production and Kinetics of Metallic Nanoparticles from Phototrophic Cell Culture
681c
Discriminative Neural Embeddings of Latent Variable Models for Molecular Property Prediction
128d
Plasma-Based Water Treatment: Targeted Application and Guidelines for Process Scale-up
681c
Discriminative Neural Embeddings of Latent Variable Models for Molecular Property Prediction
446p
The Effects of Reactor Design on Partially Etched Titanium Carbide-Derived Carbon
744a
Multiple Modes of Emplacement of Rare Earth Elements in the Fire Clay Coal, Eastern Kentucky: Implications for Utilization
352c
A Data-Mining Framework for Uncertainty Analysis in Pipeline Erosion Modeling
11h
Size-Dependent Chemical Compositions in Particulate Matters from Major Outdoor Sources in a Megacity and Corresponding Inhalation Exposure Assessment
25c
Experimental and Numerical Study on Combining Anaerobic Digestion and Gasification for Potential Energy Recovery from Biomass and Sewage Sludge
144c
Biomass Gasification in a Fixed Bed Downdraft Gasifier: Experimental Study & Comprehensive Reactor and Particle Modelling
733e
Experimental Study on Gasification of Anaerobic Digestion Solid Residue Derived from Municipal Solid Waste: Effects of Temperature, Moisture Content and Gasifying Agent
255bb
Responsive Hydrogen-Bonded Polymer Nanocomposites Containing Discrete Layers of Gold Nanoparticles Prepared By Spray-Assisted Layer-By-Layer Assembly
150f
Preliminary Study on Detroit’s Urban Food-Energy-Water (FEW) Nexus
409h
Hydrogen Production from Lignocellulosic Biomass Residues Via Gasification in Supercritical Water:Catalyst Activity and Process Optimization Study
617dc
Scale up Study of Fischer Tropsch Synthesis Reactor with Reduced CO2 emissions Using Cu-K Promoted Silica Supported Fe Catalyst
403a
All Biomass Is Local: Paying Farmers More for Cellulosic Biomass Is a Game Changer
567b
Process Strategies for High Titers of Lipid Production By Oleaginous Yeasts in Undetoxified Hydrolyzates of Lignocellulosic Biomass
770c
Biomaterial Based Engineering of Vascularized Pancreatic Islet Organoids Derived from Human Pluripotent Stem Cells (hPSCs)
87a
Engineering Novel Modular Biosensors to Confer Metabolite-Responsive Regulation of Transcription
728c
Topology Free Folding Mechanism for Polyhedral Nets
542b
Parametric Study on Gold Nanoparticles Flow Synthesis in a Microwave-Assisted Reactor
608f
Substitutional Doping in Nanocrystal Superlattice
501d
Best Practices Identified While Transferring Lyophilized and Syringe Biologic Drug Products from Internal Site to a CMO
496c
Lignin Depolymerization into Aromatic Monomers over Acidic Mesoporous Silicates
197a
Polyelectrolyte Coating of Nanoparticles for Applications in High Salinity Media
315c
Sub and Supercritical Conversion of Kirchneriella Algal Biomass into Biocrude Oil
619x
Biofuel Production Via Thermochemical Conversion of Algae and Optimizing Coproduct Utilization
772e
Effect of Process Parameters and Extractive Solvents on Hydrothermal Liquefaction of Microalgae
772f
Re-Use of Hydrothermal Liquefaction Bio-Char to Grow Galdieria Sulphuraria
269d
The Effect of N-Glycosylation on Biophysical Properties of an Anthrax Toxin Bioscavenger
237e
A Zeolite-Assisted Microwave Planar Resonator Sensor for Non-Contact Quantification of CO2 and CH4 in Gas Streams
617da
Modeling Syngas Production for Miniaturized Gas-to-Liquids Application: Extending Operation Window By Process Improvement from Different Scales
399b
A New DFT-Based Approach That More Accurately Predicts Adsorption Energies
532a
High-Temperature Ethane Dehydrogenation in Microporous Zeolite Membrane Reactor
581d
On Optimising Particle Breakage for a Downstream Process: An Attainable Region Approach
161f
Droplet Locomotion over Oil Immersed Superhydrophobic Surfaces
160b
Crosslinked Polyimide Hollow Fiber Membrane Performance Under Real Field Gas Conditions
327d
Crossflow Filtration of Waste Simulants in Support of the Low Activity Waste Pretreatment System
73a
Engaging High School Students and Their Parents in STEM through Engineering Outreach
217a
Preparing Female Graduate Students for Leadership in Academic and Industrial Careers
228aa
Characterization of Molecularly-Complete Planar Supported Cell Plasma Membranes for Biomedical Applications
673d
Single Particle Tracking in Cushioned, Blebbed Supported Lipid Bilayers Enables Studies of Transmembrane Protein Diffusion
671h
Posh Inhibitor Peptide Amphiphile Micelles As a Novel Leukemia Therapeutic Modality
588f
Spray Drying of Pharmaceuticals- Solubility and Diffusivity in the Acetone-Hpmcas System
81d
Improving the Gut Residence Time of Probiotics through Functional Metagenomics
765e
High-Throughput Measurements of Cancer Cell Deformability
22a
Economic Model Predictive Control for Integrating Scheduling and Dispatch of Microgrid Power Systems
42d
Power Management in Microgrids with Controllable Loads and Energy Exchange Commitments
190b
Control Configuration Selection Using Agglomerative Hierarchical Clustering: Graph-Theoretic Approach
425b
Optimal Scheduling of a Renewable Ammonia Plant with Wind Generation Under Variable Electricity Pricing
476a
Conceptual Process Design and Techno-Economic Analysis of a Hybrid Zeolite Membrane/Distillation Separation System for Butane Isomer Separation
524f
A Supply Chain Optimization Framework for Distributed Renewable Ammonia Production
View
Fluidized Bed Catalytic Glycerol Hydrodeoxygenation to 1,3-Propanediol
649h
Towards the Development of Single Atom Alloy Catalysts As a Means of Escaping Linear Scaling Relations
262j
Computational Thermodynamic Analysis of a Solar Thermochemical Manganese Oxide - Manganese Sulfate Water Splitting Cycle
396c
Acetalated Dextran Microparticulate Subunit Anthrax Vaccine Formulated Using Coaxial Electrospray Preserves Toxin Neutralization and Enhances Protection
531b
Synthesis and Characterization of Hyaluronic Acid and Heparin Thiol-Ene Hydrogels for the Spatial Sequestering of Bioactive Signals
27c
Systems Design and Economic Analysis of Direct Air Capture of CO2 through Temperature Vacuum Swing Adsorption on Metal Organic Frameworks
233t
Continuous Manufacturing of Co-Crystals in Twin Screw Extruder: A Case Study
233u
Continuous Wet Granulation in a Twin Screw Extruder: Effect of Process Variables on Residence Time Distribution and Granule Characteristics
284g
Continuous Co-Crystallization of Novel Theophylline and 4-Aminobenzoic Acid Co-Crystals from Twin Screw Extrusion
289c
Effect of Doping on the Activity of Nickelate Oxides Toward Surface Oxygen Exchange and Oxygen Reduction
617dc
Scale up Study of Fischer Tropsch Synthesis Reactor with Reduced CO2 emissions Using Cu-K Promoted Silica Supported Fe Catalyst
365e
Bioelectricity Generation from a Carbon Soot Electrode Using a Paper Based Microbial Fuel Cell
253bz
Prediction of the Sooting Tendencies of Candidate Biofuels from Molecular Structure Via an Artificial Neural Network
554g
CO2/N2 Separation Using Cu-BTC, Uio-66 and MIL-53(Al) Metal Organic Frameworks
403e
Technoeconomic Analysis of Pyrolysis and Electrocatalysis Depots
617dc
Scale up Study of Fischer Tropsch Synthesis Reactor with Reduced CO2 emissions Using Cu-K Promoted Silica Supported Fe Catalyst
37b
A Simple-to-Apply Predictive Wetting Model for Textured (Rough/Patterned) Surfaces and the Role of Re-Entrant Cavities
585h
A Simplified Dynamic Model of a Continuous Subsea Oil-Water Gravity Separator for Estimation of Unmeasurable Oil and Water Purities
128e
Selenate Reduction from Mine Water By Redox Reaction and Adsorption Process
128d
Plasma-Based Water Treatment: Targeted Application and Guidelines for Process Scale-up
150a
Sustainability Concepts in the Food-Energy-Water Nexus: Chemical Engineering Perspective
614f
Perchlorate Destruction from Ion-Exchange Regenerants By Catalytic Reduction Process Increases Brine Recovery
613f
Adsorption, Desorption and Flow Phenomena of Methane-Ethane Binary Gas Mixtures in Shale Powder and Whole Core Samples
304e
Binding Affinities of Amino Acids on Graphene: Assessment of Force Fields
665b
Understanding the Structural Differences Between Psychrophilic and Thermophilic Enzymes: A Molecular Dynamics Study
781c
Improving the Activity of a Thermophilic Lipase By Increasing the Flexibility Proximal to the Active Site
669g
Understanding Site Isolation of Pd and Ni in Zn-Based Bulk Intermetallics during the Selective Hydrogenation of Alkynes
498c
Solar Thermochemical Energy Storage Based on Strontium Carbonate Chemistry
482a
Constructing Predictive Kinetic Models of Metabolism for Guiding Strain Design
11e
Application of Shrinking Core Model Applied for Gas Hydrate-Based CO2 Capture in Presence of Porous Hydrogels
435j
Mechanism, Reaction Kinetics and Multi-Scale Modelling of CO2 Hydrogenation to Methanol over Trimetallic Heterogeneous Catalysts
View
Measuring the Nanomechanical Properties of Tomato Cuticles Using Atomic Force Microscopy
608f
Substitutional Doping in Nanocrystal Superlattice
599e
Highly Active Robust F Doped Transition Metal Oxide Based Solid Solution Electro-Catalyst for Acidic Medium Oxygen Evolution Reaction in PEM Based Water Electrolysis
32c
Lewis Acid Catalyzed Pyrolysis of Polystyrene in Low-Temperature Molten Salts: Experiment and Simulation
73h
Tapping into Diverse Student Assets to Enhance Design Framing Ability and Professional Identity Formation
157b
Thermally Stable, Regenerable Single Atom Catalysts Via Atom Trapping
274c
Improving the Hydrothermal Stability of Heterogeneous Catalysts for Conversion of Biorenewables Via Carbon Coating and Overcoating
779c
Influence of Sn and Bi on Pt-Catalyzed Aqueous Phase Oxidation of 1,6-Hexanediol
205a
Pd Particle Stabilization on Carbon Supports Under Hydrothermal Conditions
275f
Biomass Blending & Densification: Impacts on Biochemical Conversion Performance
78b
Exploring Diffusion in Hierarchical Zeolites with Molecular Dynamics Simulations
375d
Hybrid Reaction Pathways to Renewable Diol Monomers
375g
Reaction Engineering for Modified Furans
574e
Lewis Acid Zeolite Catalysts for Tandem Diels-Alder Cycloaddition and Dehydration of Dimethylfuran and Ethylene to Renewable p-Xylene
729a
Effects of Recycling Regenerated Heat Carrier on the Performance of an Auger Pyrolysis Reactor
228bz
Profiling the Humoral Antibody Response in Type 1 Diabetes Via Peptide Display
305f
Study of Functional Polymeric Materials for Water Remediation
490h
Single-Molecule Localization and Orientation for Super-Resolution Microscopy
766c
Core-Shell Nanocomposites for Fast Release of Hydrophobic Active Pharmaceutical Ingredients: Impact of Carrier Size
44d
Particle Engineering Research from the NSF Erc Research Experience for Teachers (RET) Program at Njit
77g
Breakage of Fractal Agglomerates
197g
Physicochemical Properties of Biocompatible Films Containing Concentrated Fenofibrate Particles Prepared Via Liquid Antisolvent Precipitation
774f
Tunable Drug Loaded Stable and Fast Release Amorphous Composites Production Using Mesoporous Neusilin®UFL2
766e
Dissolution of Carbamazepine Crystallized Directly Onto Excipients
484g
Utilizing Magnetic and Diffusive Properties to Improve Size Homogeneity of Superparamagnetic Nanoparticles
484h
Multispectral Optoacoustic Tomography (MSOT) for Imaging of Pharmacokinetics and Biodistribution of Pegylated Superparamagnetic Iron Oxide Nanoparticles
584c
Physiochemical Properties of Nanoparticles Determine Their in Vitro Cytotoxicity
726a
Nanoparticle Phagocytosis: Characterization and Quantification By Magnetic Cytometry
233am
Modeling and Simulation Efforts in Scale up of Sustained Release Microspheres
563h
Influence of Seed Pre-Soaking and Oil Body Washing Regime on the Physical Quality of the Final Suspension
501c
Tablet Compression Scale-up Risk Assessment Using a Model Based Approach
217g
Tutorial on the SMART-CN Education Modules for Incorporation in the Advanced Undergraduate or Graduate Engineering Curriculum
View
Synthesis of Yolk-Shell Structured Silicon-Germanium Anodes for Lithium-Ion Batteries
215e
Energy Dissipation Trends in Tumbling Beds of Geldart Α/C and Α/B Powder Revealed By Speckle Visibility Spectrometry
View
Electrochemical Detection of DNA Methylation and Application to Breast Cancer Screening
453d
Evaluation of the Performance of Chemically Modified Agrowaste for Solar Refrigeration Applications in Developing Countries
629e
A New Thin Layered Structural Coating on a Metal Substrate for Enhanced Hydrogen Production from Steam Methane Reforming
70a
Economic and Environmental Assessment of Methane to Ethylene Via Oxidative Coupling
207d
Nafion Nanocomposite Membranes for Use in Prospective Large-Scale Energy Storage Devices
255h
Surface Functionalization of SiO2 Nanoparticles in Nafion Nanocomposite Membranes for Use As Proton Exchange Membranes in Vanadium Redox Flow Batteries
255j
Relaxation Dynamics and Water Transport in Nafion-SiO2 Nanocomposite Membranes
694a
Quantifying Gel Network Properties Via Poroelasticity (Invited Talk)
743b
Diffusion Altering Reporter Genes for Magnetic Resonance Imaging
592b
Thermal and Thermodynamic Properties of Ionic Liquids and Molten Salts with High Thermal Stability
313a
The Value Proposition of an Industry-Defined Smart Manufacturing Platform and Integrated Market Place
405e
Membraneless Electrolyzers for Water Electrolysis
288d
Enabling Microbial Utilization of Thermally Depolyermized Lignin Monomers
231af
Optimisation of Spray Drying Process Parameters for Production of Skim Milk Powder Using a Quality By Design Approach
583c
Spray Drying of Ternary Solid Dispersions of Itraconazole: Amorphous Stability By Design of Experiment
774d
Ternary Dispersions of Itraconazole: A Comparison of Hot Melt Extrusion and Spray Drying
774g
Hot Melt Extrusion of Ternary Solid Dispersions of Itraconazole: Amorphous Vs Liquid Crystal Intermediate
667d
Estimating Thermal Diffusivity of Bulk Solids
View
Drug Delivery Mechanism of Sulfathiazole from Polyurethane Films
130b
Impact of Combined Distributive Mixing Elements and Kneading Elements on Granules Produced By Twin Screw Granulation
535j
Numerical Calculations of the Rheology and Droplet Behavior of Emulsions in the Presence of Surfactants
157a
Supported Pt-Re Catalyst for Selective Hydrogenolysis and Hydrogenation Reactions
274b
Influence of Solid Acid Structure and Composition on Hydrocarbon Cracking Activity Under Supercritical Conditions
281d
Aldol Condensation of Acetaldehyde over Titania, Hydroxyapatite and Magnesia
779c
Influence of Sn and Bi on Pt-Catalyzed Aqueous Phase Oxidation of 1,6-Hexanediol
228bq
Hybrid Promoter Engineering for the Development of Novel Promoters Inducible By Lignin Derived Phenolics
View
Butanol Production from Corn Residue Using the Simultaneous Saccharification and Fermentation Method with Genetically Modified Clostridium Cellulovorans
262q
Development of a Thermodynamic Model for Confined Fluids
147c
Mitogen-Activated Protein Kinase-Driven Sprouty2 Expression Mediates Resistance to Receptor Tyrosine Kinase-Targeted Therapeutics in Glioblastoma Cells
253bt
Fluid Transport through Nano-Pores: A Stochastic Approach
745g
Material Prediction for Carbon Dioxide Conversion to Carbon Monoxide Using Reverse Water Gas Shift Chemical Looping (RWGS-CL) Process
233ag
Characterization of Compaction Behaviour of Powders in Solid-Dosage Manufacturing Using Finite Element Analysis
233l
Model-Based Process Analysis in Continuous Manufacturing of Pharmaceuticals: Calibration of a Fluid Bed Dryer Model
400d
Applying Supervisory Process Control Practices to Continuous Pharmaceutical Manufacturing
658e
Methodology and Pitfalls When Calibrating a PBM: The Case of Twin-Screw Wet Granulation
708a
Uncertainty Analysis As Essential Step in the Establishment of the Dynamic Design Space of Primary Drying during Freeze-Drying
708h
Experimental Analysis of Pharmaceutical Twin-Screw Wet Granulation Using Hydrophilic and Hydrophobic Formulations
742a
CFD MODEL Based Near-Infrared Spectroscopy Implementation for in-LINE ASSAY Monitoring of a Pharmaceutical Suspension
442a
Limitations of Simple Mass Transfer Models in Polydisperse Liquid- Liquid Dispersions
285g
High-G Drying in Vortex Chambers
515a
Realization of Sustainable and Cost-Effective Cellulosic Ethanol Production By Deploying Enzyme and Advanced Yeast Technologies in an Integrated Approach
285h
Novel Strong Starch and Salt Composites Structures, What Are They and What Characterises Them
620h
Active Janus Motors in Acoustic Confinement
304d
Enhanced Sampling of Protein Structures at the Air-Water Interface
381d
Modeling Water+Hydrocarbons and Water+Oxygenates Phase Equilibrium with the GC-PPC-SAFT Equation of State
496e
Tandem Catalysis in a New, Solid-Phase Route to Renewable Aromatic Chemicals from Biobased Furanics
573b
Novel Fe-Promoted MgAl2O4 Support Material for Control of Carbon Deposition during Reforming Reactions
61f
High Shear Granulation: An Investigation into the Granule Consolidation Mechanism
290e
Characterization and Optimal Site Matching of Wind Turbine: Effects on the Economics of Synthetic Methane Production
363g
Optimal Design of a Fixed-Bed Ilmenite-Based Chemical-Looping Combustion Process
41d
Surface Hydrogen Enables Sub-Eutectic Vapor-Liquid-Solid Semiconductor Nanowire Growth
759c
Towards the Elucidation of the Limonin Biosynthetic Pathway, a Triterpene Derived Natural Product in Citrus sinensis
View
Antimicrobial Peptide Amphiphiles (AMPA) As a Surface Coating for Endotracheal Tubes
453a
Adsorption-Based Heating and Cooling – Metal-Organic Frameworks over Zeolites?
586g
An Injectable Hybrid Hydrogel with Oriented Short Fibers for Cell Guidance
233l
Model-Based Process Analysis in Continuous Manufacturing of Pharmaceuticals: Calibration of a Fluid Bed Dryer Model
194b
Breaking through the Productivity Barrier: Integration of a Novel Modular Chromatography Scaffold and a New Resin Design to Achieve a Hyper-Productive Protein a Capture Process
693b
Carbon Foams from Polyhipe/Reduced Graphene Oxide Composites and Their Performance As Electrodes in Supercapacitor Devices
740d
Comparative Mapping of Dengue Virus-Host Interactions Using Global Proteomics
85c
The Dual Liquid-Solid Nature of Fluidized Granular Matter and Its Influence on Pattern Formation
749e
Residence Time Distribution of Fine to Coarse Particles in Rotary Kilns
753f
Thermal Model of a Solar Porous Media Receiver for a Thermochemical Reactor
501f
Applying Reliability Centered Maintenance in Incinerators of Industrial Solid Waste
151i
Synchrotron X-Ray Reflectivity and Computational Simulations of Structural Organization of the Binary Mixture 5CB/8CB Liquid Crystals at Liquid Crystal-Air Interface
255ab
Complexation Driven Assembly of Block Copolyelectrolytes into Spherical Micelles, Flower-like Micelles and Macro-Networks
665h
Tension-Dependent Free Energies of Nucleosome Unwrapping
728f
DNA-Conjugated Nanoparticle Assemblies Demonstrate a Tunable Mechanical Response
260ad
Cuboidal Colloidal Particles in Nematic Liquid Crystal: Defect Structures and Self-Assembly
634g
Batch Adsorber Analogs for Rapid Screening of Adsorbents for CO2 Capture
563b
Membrane Based Process for Polyphenols Recovery from Winery Effluents
681b
Comparing Molecules and Solids Across Structural and Alchemical Space
229ag
Polyacetal As a Novel Drug Carrier for Targeted Cancer Therapies
446e
Treated Laterite As Potential Adsorbent for Removal of Heavy Metals from Drinking Water
511b
Corrosion Protection of Aluminum Alloy Via Graphene-Polymer Nanocomposite Coatings
285d
Evidence of Crystal Nuclei Breeding in Laboratory Scale Seeded Batch Isothermal Crystallisation Experiments
230ay
Modeling of Ultra-High Density Bio-Reactor
401b
Effects of Physical Properties and Phase Dispersion on Sieve Tray Extractor Performance
577a
High-Performance Separation of Cis/Trans Isomers on MIL-125(Ti)
739e
Photoswitchable Nanomaterials Via Ordered Self-Assembly of Monodisperse Oligodimethylsiloxanes
515a
Realization of Sustainable and Cost-Effective Cellulosic Ethanol Production By Deploying Enzyme and Advanced Yeast Technologies in an Integrated Approach
285g
High-G Drying in Vortex Chambers
302d
Discrete Particle Simulations of Particle Segregation in Rotating Fluidized Beds in Vortex Chambers
378i
Reduced Bubbling and Effect of Cohesive Forces through High-G Operation in Rotating Fluidized Beds in Vortex Chambers
629e
A New Thin Layered Structural Coating on a Metal Substrate for Enhanced Hydrogen Production from Steam Methane Reforming
311b
Development, Control and Modelling of a Scalable Continuous Manufacturing Process for Multiphase Oxidations
299d
Highly Dispersed Metals on Metal Oxide Supports Via Reactive Deposition from Supercritical CO2
555c
Molecular Weight Growth Kinetics of Olefin Pyrolysis Under Low to Intermediate Temperatures
465f
First Principles Quantum Chemistry Calculations to Model CO2 Electroreduction on SnO2 Particles
268a
A Generalizable Crispr-Cas9 System for Rapid and Scalable Gene Target Discovery and Optimization of Metabolism
206c
A Practical Framework Towards Prediction of Breaking Force and Disintegration of Tablet Formulations Using Machine Learning Tools and Nondestructive Ultrasound
254ab
Synthesis of Immobilized Amine Sorbent Pellets from Poly (chloroprene) and Fly Ash Binders for Post-Combustion CO2 Capture
749e
Residence Time Distribution of Fine to Coarse Particles in Rotary Kilns
694d
Effect of Layer Density on Irreversible Thermal Expansion and Interlayer Strength in Additively Manufactured Acrylonitrile Butadiene Styrene
600a
Nanoengineering and Application of Protected but Accessible Metal Cluster Catalysts
669a
Single-Site Iridium Complexes on MgO Powder: Spectroscopic, Microscopic, and Catalytic Evidence of Dependence of Properties on MgO Surface Sites
734d
100-Fold Rate Enhancement Caused By Dioxygen Ligands on a Supported, Single-Site Tetrairidium Cluster Catalyst for Ethylene Hydrogenation
156d
Thermodynamics and Statistical Mechanics of Drying at the Nano-Scale
665a
Destabilization of Proteins in Extreme Conditions: Molecular Simulations of the Denaturation of Trp-Cage Miniprotein
715a
The Effect of Material Flexibility on the Drying Transition of Water Between Hydrophobic Objects: Thermodynamics and Kinetics
715h
Molecular Model for Chirality Phenomena
754c
Kinetics and Mechanism of Homogeneous Ice Nucleation in Freestanding Nanofilms of Supercooled Water
View
Effect of Zinc Telluride- Tungsten Oxide Composite for Water Splitting Using Cathodic Electrodeposition on Tin-Indium Substrate
531d
Fabrication of Tailored Hydrogel Particles By Controlled Oxygen Inhibited Photopolymerization
231al
Simulation of a sugar beet factory using a chemical engineering software to perform energy analysis
544g
Metal Organic Framework Composites for Chemical Protection
421c
Invited - Thermal and Plasma Enhanced Atomic Layer Deposition on Powders and Particles
24a
Experimental Techniques to Study Non-Spherical Particles in Granular Flows
544d
Biofuel and Reference Diesel Particles: Differences in Inflammatory and Oxidative Effects
448l
The Application of Powder Rheology for Evaluating the Flow Behaviour of Powders for Additive Manufacturing Applications
228fc
Mimicking Mussel Adhesives with Peptide Glue
367d
Development of Cordierite Honeycomb Membrane Filters for Produced Water Treatment
646a
Mixed Matrix Membranes for H2/CO2 Separation
329d
Self-Assembly Under Conditions Mimicking Deep-Sea Hydrothermal Vents
543h
Iron OXIDE Nanoparticle-Graphene Patterned Interfaces
16l
Development of Green Technologies using Fluid Simulation Knowledge
262az
A SAFT-Based Equation of State for Electrolyte Solutions; Focused on Second Order Thermodynamic Properties
345e
Extractive Desulfurization of Fuels Using Ionic Liquids
617ds
Oxidative-Extractive Desulfurization of Model Diesel Oil By CTA-Type Dawson Type Emulsion Catalyst
665c
Self-Assembled Peptides with RGD Motifs As Scaffolds for Tissue Engineering
303e
Molecular Simulation for Adsorption-Based Separation of Bio-Renewable Chemicals
View
Catalytic Application of Few Layer MoS2
432g
Study of Transmethylation As Primary Step on the Decomposition of Methoxy-Rich Lignin Model Compound over Zeolite Catalyst
700e
DNA Functionalized, Fluorescent Nanomaterials for the Specific, Ratiometric Detection of Dopamine for In Vivo Sensing
204g
Optical Nanosensors for High Spatial and Temporal Studies of Neurotransmitter Imaging in the Brain
677e
Improvement of Sn Electrocatalytic Reaction for CO2 Conversion into Formate
299e
Quantum Dots Synthesis in Continuous Supercritical Micro-Millireactors
570f
Capture and Concentration of Pathogens in Chaotic Flows
598d
Modeling of a Recombinant Protein Production System: Cell Culture Dynamics and Dynamic Metabolic Flux Analysis
753e
Development and Thermal Test Results of a 10 Kw Porous Media Solar Reactor
519a
Shear-Induced Alignment of Janus Particle Lamellar Structures
448m
Process Analytical Technology for High Shear Wet Granulation: Wet Mass Consistency Reported By in-Line Drag Flow Force Sensor Is Consistent with Powder Rheology Measured By at-Line FT4 Powder Rheometer
View
A Look at the Recrystallization of Drug out of Supersaturated Amorphous Dispersions
740b
Recurrent Patterns of DNA Copy Number Alterations in Tumors Reflect Metabolic Selection Pressures
629a
Engineering Highly Active Brookite Titania Nanorods for Sustainable Hydrogen Production
674a
Mechanism of Oxygen Activation during Selective Catalytic Reduction of NO with NH3 in Cu-SSZ-13 Zeolites
216g
Effects of Cu Density in Cu-SSZ-13 Zeolites on Low-Temperature NOx Selective Catalytic Reduction with NH3
578c
Cu Site Speciation in SSZ-13 Zeolites Resolved through UV-Visible Spectroscopy, Selective Synthesis, Time-Dependent Density Functional Theory, and Ab Initio Molecular Dynamics
763c
The Role of the Support for Pt Catalysts during the Water-Gas Shift Reaction
782d
Unraveling the Nature of Boundary Sites of Metal-on-Oxide Catalysts
146e
Mix and Match Sweets: Modular, Coordinated Cell-Free Transcription, Translation, and Glycosylation of Proteins Using Selectively Enriched Escherichia coli Cell Lysates
459e
Towards Development of Rhodococcus Opacus As a Microbial Cell Factory: Conversion of Lignin-Derived Aromatic Compounds into Lipids
188a
Metabolic Network Design for Ethanol Production By Synechocystis sp. PCC 6803
112f
Reaction Engineering Routes to Waste Gasification for Sustainable Living Environments
751c
Green Net Value Added As a Sustainability Metric Based on Life Cycle Assessment: An Application to Bounty® Paper Towel
393e
Solvent-Enabled Control of Reactivity for Liquid-Phase Biomass Conversion Reactions
14ar
Sythesis of Biomass-Derived Carbon Materials and Their Application on Energy Storage and Fuel Cell
491g
Sulfur Self-Doped Micro/Mesoporous Carbon Derived from Lignin and Its Application on Supercapacitor and Oxygen Reduction Reaction
541c
Lecithin-Derived N-Doped Carbons for Supercapacitor Electrode Material
427c
Label-Free Magnetic Additive Biomanufacturing Technologies to Isolate and Sort Circulating Tumor Cells and Microemboli
255ax
Chain-By-Chain Monte Carlo Method for Non-Linear Polymerization
260am
Nanoparticles As Biomolecular Cargo Transporters in Plant Systems
359d
Improved Data-Driven Mathematical Modeling and Global Optimization Framework: An Application in Refinery Planning Operations
388c
High-Throughput Prediction of Finite Temperature Free Energies of Solids
311e
Influence of the Energy Criteria for the Development of Industrialization Strategies in Melt Crystallization
227e
Adsorptive Recovery of Biobutanol in Vapor Phase
453e
Bio-Alcohol Recovery from Aqueous Solutions with a Resistant and Formulated MOF Material
453f
Understanding the Influence of Carbon Dioxide on the Adsorption of Butanol from the Off-Gas from the ABE Fermentation
577a
High-Performance Separation of Cis/Trans Isomers on MIL-125(Ti)
View
Determination of Temperature Parameters for Optimization of a Plastic Pyrolysis Process for Fuel Oil
17h
The Formation of Choline-Lignin Complex By Choline Based Ionic Liquid
412b
Electrical Properties of Controlled, Longitudinal Wrinkles on Graphene Produced Via Bacterial-Scaffold Shrinkage
315c
Sub and Supercritical Conversion of Kirchneriella Algal Biomass into Biocrude Oil
619x
Biofuel Production Via Thermochemical Conversion of Algae and Optimizing Coproduct Utilization
772e
Effect of Process Parameters and Extractive Solvents on Hydrothermal Liquefaction of Microalgae
772f
Re-Use of Hydrothermal Liquefaction Bio-Char to Grow Galdieria Sulphuraria
384a
Use of Real-Time Analytics and Apoptosis Assays for Enhanced Understanding of Cell Growth and Viability in a CHO-Based Process for Monoclonal Antibody Production
77g
Breakage of Fractal Agglomerates
255p
Anion Effects on the Structure and Ion Transfer Properties of Surface-Tethered Poly Ionic Liquids
91c
Chemically Modified Lignin Surfactant: Synthesis, Characterization and Their O/W Interfacial Properties
139b
Exploring Cellulose Nanofibrils As Renewable Resource for Metal-Free Heteroatoms-Doped Carbon Electrocatalyst
645d
Capacitive Behavior of Natural Biomaterials in High-Performance Renewable Supercapacitor
214c
3D Printed Nanocellulosic Materials and Their Composite
368c
Flow Modulation Driven Stratification of Size Bidisperse Granular Mixtures in Quasi-2D Heaps
455e
Using Multiobjective Optimization and Life Cycle Assessment for the Design of More Sustainable National and International Energy Systems
612c
In-Situ Imaging of Particles during Rapid Thermite Deflagrations
18g
Thermodynamic Properties and Transport of Fluids in Presence of Cross-Linked Polymers and Confinement: Modeling, Simulations and Experiments
242b
Hydrocarbon Mixture Bubble Points in Nanoporous Silica Monoliths
260aq
Application of Nanofluidics in Understanding Fluid Flow in Tight Rocks
613d
Changes in Bubble Point of Hydrocarbons in Shales: Effect of Confinement and Presence of Kerogen
70e
Biocatalytic Polymer Material for Partial Oxidation of Methane to Methanol
327f
Co-Adsorption of Iodine and Water By Reduced Silver-Exchanged Mordenite
466d
Parameter Estimation Methods for Salting out Crystallization
478a
Bottom-up Approach to Constructing a Polymerization Process Model: Leveraging New Insights for Improved Manufacturing Performance
View
Thermal Processing and Mechanical Testing of Ionic Polyimide and Composite Materials
669e
Site-Specific IR Spectroscopy for Analyzing Pt Structure Sensitivity from Single Atoms to Fully Coordinated Surfaces
213b
Dynamics of Anhydrous Proton Transport on the Surface of Functionalized Graphene
85a
Modeling the Effect of Inhomogeneities on the Fluid-Particle Drag Force
416b
Fluid Dynamics Modeling for a Novel High Throughput Pipette Viscometer
487c
Characterization of Lab and Plant Reactors Using Fast Competitive Reactions and a Predictive Model
View
Long Wavelength Azo Dye Monomers for Photomechanical Applications
446x
Design of Metal Based Nanofiber Scaffolds for the Removal of Heavy Metal Ions in Harsh Effluents
368g
Improving the Mixing Process of Dry Powder Inhaler Formulations with the Iron Oxide Colour Method
489f
Techno-Economic Analysis of Metal-Organic Framework Materials for Onboard, Light-Duty Vehicle Hydrogen and Natural Gas Storage
528f
Numerical Simulation and Optimization of Environmental Treatment Design Using Parallel Computational Methods: Theory and Application
666e
Experimental Measurements and Predictions of the Properties of Refrigerant Fluids Using Ab-Initio, SAFT-VR Mie and COSMO Calculations
646e
Influence of Surface-Treated SiO2 on the Transport Behavior of O2 and N2 through Polydimethylsiloxane Nanocomposite Membrane
267a
Developing a Quantitative Spatial Resolution of Deactivation Effects on FT Synthesis in a Microchannel Reactor When Operating with Ultra-Low Sulfur Levels
683b
Computationally-Driven Design of a Heterobivalent and Gate to Improve Targeting Agent Selectivity
74f
Robust Dynamic Principal Component Analysis Method for Modelling Process Data
478j
Comparative Analysis of Biomimetic CO2 Hydration over Computationally Designed Ruthenium Cluster Decorated Graphene/Carbon Nanotube
163c
Mixing Assessments for Industrial Stirred Tank Reactors with Gas Entrainment from the Headspace
326a
Advances in 3D Manufacturing
149c
A Comparative Study of Euler-Euler and Euler-Lagrange Mesoscale Simulations of Moderately Dense Gas-Solid Flows
215g
Eulerian-Lagrangian Simulations of Bidisperse Particles in Cluster-Induced Turbulence
321g
RANS Modeling of Cluster-Induced and Shear Turbulence in Particle-Laden Channel Flow
378c
Clustering in Gas-Solid Flows: How Are Clusters Modified By Shear?
32c
Lewis Acid Catalyzed Pyrolysis of Polystyrene in Low-Temperature Molten Salts: Experiment and Simulation
604f
Effective and Industrially Relevant Compounding of Natural Fiber-Reinforced Thermoplastic Composites Via Solid-State Shear Pulverization
421c
Invited - Thermal and Plasma Enhanced Atomic Layer Deposition on Powders and Particles
365d
Molybdenum Disulfide As a Protection Layer and Catalyst for Gallium Indium Phosphide Solar Water Splitting Photocathodes
228r
Integrated Electrochemical-Biological Systems for the Production of Fuels and Chemicals from CO2
310a
Developing Structure-Property Relationships Between Reactant Structures, Ionic Liquids, and Reaction Rate Constant
740g
Deductive Determination of Dynamic Cellular Objectives from Biological Data
651i
Optimized and Tested Zein Film for Utilization As an Effective SERS Sensor
530b
A New Approach to Measure Internal Resistance of Microbial Fuel Cells
View
Optimizing an Electrospinning Process of Thermoresponsive Polymer-Protein Composite Nanofibers for Cell Culture
278a
Modulating Cell-Matrix Interactions Is an Effective Method to Control Cell-Cell Junctions and Thus Improve the Predictive Capability of the Caco-2 in Vitro Model of Drug Permeability
334b
Maintenance of Neural Progenitor Cell "Stemness" in 3D Hydrogels Requires Matrix Remodeling
395a
Injectable Hydrogels for Tandem Cell/Gene Transplantation
672d
Maintenance of Neural Progenitor Cell Stemness in 3D Hydrogels Requires Matrix Remodeling
228dz
Challenges in Predicting Protein-Protein Interactions from Measurements of Molecular Diffusivity
141e
Structure and Rheology of Branched Micellar Fluids from Molecular Dynamics Simulations
573b
Novel Fe-Promoted MgAl2O4 Support Material for Control of Carbon Deposition during Reforming Reactions
484f
Insights into Magnetic Particle Imaging Obtained from Modeling
567e
Comparing Sugar Titers and Ethanol Yields from Fed Batch Fermentation of Celf and DA Pretreated Poplar Solids at High Glucan Loadings
233ag
Characterization of Compaction Behaviour of Powders in Solid-Dosage Manufacturing Using Finite Element Analysis
104h
Role of Surface Microstructure and Elasticity in Promoting Lubricated Contact and Adhesion
699d
pH Sensing through Silicon Nanoribbon/Carbon Nanotube Porin Hybrid Sensor
739f
Molecular Alignment of Phase-Separated, Segmented Polyurethanes in Thin Films Using Intrinsic Fluorescence
621f
Chemical Engineering Undergraduate Research at the University of Kansas and the University of Delaware
161a
Dynamic Self-Assembly of Human Cells Using Inertial Microflow
216g
Effects of Cu Density in Cu-SSZ-13 Zeolites on Low-Temperature NOx Selective Catalytic Reduction with NH3
578c
Cu Site Speciation in SSZ-13 Zeolites Resolved through UV-Visible Spectroscopy, Selective Synthesis, Time-Dependent Density Functional Theory, and Ab Initio Molecular Dynamics
627e
Synthetic Control of Framework Aluminum Distribution in Zeolites and Consequences for Acid and Redox Catalysis
674a
Mechanism of Oxygen Activation during Selective Catalytic Reduction of NO with NH3 in Cu-SSZ-13 Zeolites
728h
Multiscale Modelling of Macromolecule Self-Assembly in Solution: The Case of Poly-ε-Caprolactone in Acetone-Water Mixtures
233ai
Systematic Technoeconomic Comparison of Separation Solvents for Green Continuous Pharmaceutical Manufacturing of Diphenhydramine
435g
An Assessment of Solvent Effects on the Selectivity of an Alkylation Reaction: A Comparison Between Experiments and Computations
153e
Molecular Simulation of Double Retrograde Vaporization
423f
Numerical Analysis of DNA-Functionalized Colloidal Particle Deposition in a Channel Flow
158d
Design, Scheduling and Control: A Simultaneous Approach By Multi-Parametric Programming
425g
Production Planning and Scheduling Integration through Multiparametric Bilevel Mixed-Integer Optimization
514b
Multi-Parametric Quadratic Programming: Past, Present and Future
514c
Multiparametric Programming Based Algorithms for Bilevel Mixed-Integer Linear and Quadratic Programming Problems
145b
Bimetallic Ru-Pt and Pt-Co Fuel Cell Catalysts Prepared By Strong Electrostatic Adsorption and Electroless Deposition
410c
Investigation of the Use of Metal-Organic Frameworks for Combined Water Purification and Catalytic H2 Production
View
A 3-D Printed Scaffold for Improving Coating Efficiency in Electrospun Membranes for Membrane Distillation Applications
492d
Electrochemical Carbon Dioxide Reduction As an Alternative Source of Fuels and Chemicals
679e
A Combined Pyrolysis – Gasification Study to Increase Syngas Production Yield from Beer Bagasse Waste
464f
Catalytic Motors Near Curved Surfaces: Guided and Trapped Motion
679e
A Combined Pyrolysis – Gasification Study to Increase Syngas Production Yield from Beer Bagasse Waste
246g
Process Systems Lifecycle Management Using a Model Based Engineering Approach
248ae
Integrated Biorefineries Using Ionic Liquids: Application to Macroalgae Feedstock
429c
Application of Low-Cost Components to the Chemical Engineering Practices
592d
Prediction of CO2 Solubility in Ionic Liquids Using Artificial Neural Networks and COSMO σ-Moments
618c
Ionic Liquids As Entrainers for the Separation of Aliphatic/Aromatic Mixtures By Extractive Distillation Systems: Rigorous Model Based Process Optimization
686b
Effects in Morphology and Thermoluminescent Characteristics of Lif Crystals Synthesized By Using Nonionic and Cationic Surfactants
403f
Electrochemical Bio-Oil Stabilization As an Alternative for Distributed Processing of Biomass
View
Engineering Medium Chain Volatile Ester Biosynthesis By Eeb1 in S. Cerevisiae
View
Analysis of the Electrocatalytic Activity of Nickelate Oxides As Cathode Electrocatalysts for Li-Air Batteries
View
Exploring Actin Filaments and the Effect of Rock in Gemcitabine Resistant Pancreatic Cancer Cells
157c
Geometric and Electronic Effects in Pd and Pt Alloy Alkane Dehydrogenation Catalysts
231am
Characterization of Sweet Potato (Ipomoea batatas L.) Starch from Two Clones and Evaluation of Its Properties for Industrial Uses
228ar
Batch Production of Coenzyme Q By Metabolic Engineered Escherichia coli strains
View
High-x Block Copolymers Based on Vinyl Pyridine for Microelectronics
465e
Solvation Effects in Surface Electrochemistry for Oxygen Evolution Reaction Catalysis on Transition Metal Oxides
52a
A High Pressure Viscometer for the Assessment of Viscosity and Density of Lubricants and Polymer Solutions Under Pressure
52g
Volumetric Properties of Cyclohexane + CO2 Mixtures at High Pressures
218c
Volumetric Properties and Modeling of the Binary Mixtures of Ethanol with Ionic Liquids [BMIM]Ac and [BMIM]Cl
230an
Viscoelasticity of Mucus Layers Secreted By Intestinal Epithelial Cells
255n
Charged Polysulfone Based Polymer Electrolytes for Lithium Ion Batteries
231i
Comparative Evaluation of 13 Yeast Species in the Yarrowia Clade on Lignocellulosic Biomass Hydrolysate and Genetic Engineering of Inhibitor Tolerant Strains for Lipid and Biofuel Production
567b
Process Strategies for High Titers of Lipid Production By Oleaginous Yeasts in Undetoxified Hydrolyzates of Lignocellulosic Biomass
416b
Fluid Dynamics Modeling for a Novel High Throughput Pipette Viscometer
413e
Research from Engineering Highly Crosslinked Polymers to Cyberphysical Security
137b
Highly Efficient Warm Gas Carbon Capture System for IGCC Power Plants
580f
Technoeconomic Study of AB Synthesis for Biobutanol Production
237f
Performance of Vibronic Level Switches in Corrosive Services
249z
Novel Sampling Technique for High Dimensionalstochastic Optimization/Stochastic Programmingproblems
304g
Conformational Ensemble of Islet Amyloid Polypeptide in a Membrane Environment
99h
Study of Electron Transport Mechanism in Dye-Sensitized Solar Cell with the Effect of Morphology, Crystalline Structure and Electron Mobility
441h
Thermophysical Properties of Ionic Liquids - Ilthermo Archival Database: 3. Engineering Applications
526d
Microwave Enhancement of Energetic Materials Combustion
619at
CO2/Brine/Rock Interactions in Lower Tuscaloosa Formation
234j
Insights on Life Cycle Assesment of Ionic Liquid Based CO2 Capture Processes
278a
Modulating Cell-Matrix Interactions Is an Effective Method to Control Cell-Cell Junctions and Thus Improve the Predictive Capability of the Caco-2 in Vitro Model of Drug Permeability
View
Butanol Production from Corn Residue Using the Simultaneous Saccharification and Fermentation Method with Genetically Modified Clostridium Cellulovorans
228eh
Graphene-Based Microfluidics for Serial Microcrystallography
230k
Structure of Internal Circulations in Slug Flow through a Rectangular Micro-Channel
750i
Biorenewable Tough Blends of Polylactide and Acrylated Epoxidized Soybean Oil Compatibilized By a Polylactide Star Polymer
678g
Programming DNA-Mediated Colloidal Self-Assembly to Control 3D Binary Superlattice Formation
341d
Developing a Stochastic Model of LPS-Induced TNF-α Production in Macrophages
408f
Study of Structured Flow Pattern and Bubble Characteristics of a Pulsed Fluidized Bed Using Kinetic Theory and Turbulence Model
626b
Gas-Phase Catalytic Oxidation of Methane into Methanol over Copper-Exchanged Zeolites with Molecular Oxygen
260ae
Material and Toxicity Evaluations of Nanoclays throughout Their Life Cycle
260al
Assessment of the Exposure of Human Lung Epithelial Cells to Nanoclays
699c
Biological Self-Recognition and Self-Assembly for the Next Generation of Hybrid Wires
View
Enzyme-Based Conjugates Capable of Bacterial Decontamination
524c
Development of an Integrated Process for Sustainable Production of Biodiesel and Plant Protein Isolates from Underutilized Feedstock
211c
A Heuristic-Based Model for Gasification-Based Plants with Flexible Feedstock/Product in Carbon Constrained Scenarios
749e
Residence Time Distribution of Fine to Coarse Particles in Rotary Kilns
415h
Integrated Solar Energy Conversion and Storage Using Solar Flow Batteries
556g
Filomicelles Self-Assembled from Degradable Di-Block Copolymers Deliver Retinoids and Chemotherapeutics in Durable Control of Carcinoma Cell Fate
603f
Water-Polymer Mobility and Distribution in Hydrated Aromatic Ionomer Thin Films
View
Variability of Electronic Cigarette Particle Size Distributions and the Effects of Background Air
228u
Chitin-Binding Proteins Induce Biomacromolecular Complexation: Inspirations from Insect Cuticle for Hierarchical Self-Assembly
641a
Selective Activation of Primary C-H Bonds of Propane on Pdo(101)
228fd
Diminished Effectiveness of Neutralizing Antibodies for Respiratory Illnesses Due to Mass Transfer Limitations
150b
Optimizing Spatio-Temporal Sensor Placement for Nutrient Monitoring: Algorithmic Framework
245f
Optimization of Dynamic Systems Including Ordinary and Fractional Differential Equations
249z
Novel Sampling Technique for High Dimensionalstochastic Optimization/Stochastic Programmingproblems
457c
Multi-Agent Optimization Framework (MAOP) for Synthesizing Optimal Radioactive Waste Blends
637a
A Multi-Objective Optimization Approach to Optimal Sensor Location Problem in IGCC Power Plant in the Face of Uncertainties
706d
Optimal Controller Design Based on Efficient Ant Colony Optimization Algorithm. Case Study: Chemical Process Control
366c
Molecular Simulations of Ion Permeation in Graphene Oxide Membranes
617dc
Scale up Study of Fischer Tropsch Synthesis Reactor with Reduced CO2 emissions Using Cu-K Promoted Silica Supported Fe Catalyst
39b
CFD Modeling of an Industrial Furnace Reformer and 3D Multi Scale Model for Packed Bed Reactor for Synthesis Gas Production
300a
Experimental and Simulation Study of Ethanol Steam Reforming Reaction for Hydrogen Production in Large Scale Catalytic Membrane Reactor
449ak
A Computational Fluid Dynamics Study of a Pilot-Scale Multitube Membrane Module for Hydrogen Purification
617gx
Resolved Particle Fixed-Bed CFD with Microkinetics for Methanol Oxidation on Silver
327c
Melter Feed Viscosity during Conversion to Glass: Comparison Between Low-Activity and High-Level Nuclear Waste Feeds
17j
Can We Use Short Rotation Hybrid Poplar Coppice for Fuels and Chemicals Production Via Biochemical and Thermochemical Conversion?
10ab
Charge Storage Mechanisms of Carbides and Nitrides Based Supercapacitors
351b
High Energy Density Carbides and Nitrides Based Supercapacitors
530g
Charge Storage Mechanisms of High-Surface-Area Carbides and Nitrides
530h
Pseudocapacitive Hydrogen and Hydroxide Storage in High-Surface-Area Carbides and Nitrides
80c
Al-based Coating for Coke Reduction during Ethane Steam Cracking
755g
Surface Characterization of Polymethacrylate Coated Biochips with Water-in-Air Contact Angle Analysis
227a
A Refined Model for Adsorption of Simple Gases on Graphite
721g
Viral Gene Vector-Releasing Biodegradable Polyelectrolyte Fiber-Sutures
142h
Machine Learning for Advancing Discovery of Novel Thermoelectric Materials. the Thermoel
259i
Surface Modifications of Superparamagnetic Iron Oxide Nanoparticles with Polylactic Acid-Polyethylene Glycol Diblock Copolymer and Graphene Oxide for a Protein Delivery Vehicle
View
Analysis of Hypoxia in U87 Glioblastoma Suspension Cultures
View
Thermally Triggered Drug Release from Injectable Hydrogel Composite for Local Chemotherapy Delivery to Tumors
479f
Sipat 5.0 – the Next Generation of PAT Data Management
639b
Effect of Size and Charge of Metal IONS on Hydrogen Peroxide Stability in Silica Hydrogels
255bv
in-Plane Stress Measurement in Polymer Coatings As Induced By Vapor Sorption/Desorption Processes
417f
Modeling and Characterization of Organic Solvent Nanofiltration PDMS Membranes for the Separation of Organic Mixtures
571g
Tuning the Gas Barrier Properties and Selectivity By Means of Graphene-Based Coatings on Polymeric Film
617b
Hydrogen Production By Steam Reforming of Bio-Oil Derived Acetic Acid over Ni Based Zr-SBA-15 Type Mesoporous Catalysts
253ac
Desolvation Barriers in Ionic Crystal Growth
374b
A Target Upper Bound on Reaction Selectivity Via Feinberg’s Cfstr Equivalence Principle
630h
New Conceptual Design Models for Carbon Capture and Utilization Via Carbonate-Based Construction Materials
655c
Modeling the Step Velocity of Non-Centrosymmetric Growth Units and Accounting for Stable/Unstable Layers
702c
A Mechanistic Growth Model for Organic Salt Morphology Prediction
713b
Polymorph Selection By Continuous Crystallization
767b
Simultaneous Measurement of Granule Disintegration and API Dissolution Profiles As a Tool for Maintaining Product Quality during Process Scale-up
554f
Recovery and Purification of Methane in Biogas Using One-Tower Vpsa-Methane with Integrated Pretreatment Adsorbent Layers
228cj
Engineering Red Blood Cell-Based Biosensors for Physiological Monitoring
463b
Realizing the Potential of Micro-Phase Separated Block Copolymer Electrolytes: Ion Domain Connectivity Plays a Prominent Role in Ion Conduction
76e
The Integrated Quality Assessment: Office of Process and Facilities' Perspective on the Holistic Evaluation of Pharmaceutical Quality
613b
Well Integrity Inspection in Unconventional Gas Wells
207b
Effect of Nanofillers on Thermal and Mechanical Properties of Oilfield Elastomers
236c
Brief Remarks of Editor-in-Chief of Biotechnology Progress
257v
RB5 Dye Removal Using a Mexican Natural Zeolite (MNZ) in Solution
View
Rheology of Bovine Cervical Mucus
165h
Product-Agnostic Computational Fluid Dynamic (CFD) Model for Single-Use Mixing System
449br
Improving the Performance of Commercial Polyethylene Based Anion Exchange Membranes in an Electrodialysis Process Using Functionalized Iron Oxide Nanoparticles
228dj
Characterization of Conjugated Polyelectrolytes As Molecular Sensors for the Detection of Amyloids in Neurodegenerative Diseases
431b
Process Intensification and Distillation: How to Control a Fixed Design Dividing Wall Distillation Column
577g
Transesterification of Propylene Glycol Methyl Ether Using Heterogeneous and Homogeneous Catalyst in Simulated Moving Bed Reactor
476b
Process Integration for Simulated Moving Bed Reactor for Production of Glycol Ether Acetate
37b
A Simple-to-Apply Predictive Wetting Model for Textured (Rough/Patterned) Surfaces and the Role of Re-Entrant Cavities
699c
Biological Self-Recognition and Self-Assembly for the Next Generation of Hybrid Wires
49c
Melanoma-Induced Endothelial Barrier Disruption Via VE-Cadherin Disassembly and Cell Contractility
231n
Enhanced N-Butanol Fermentation By Engineered Clostridium Tyrobutyricum Integrated with Gas Stripping
617hq
Calcium Oxide As in-Situ Catalyst for Steam Gasification of Bio-Char
15l
Taking the Temperature of the Interiors of Magnetically Heated Nanoparticles and Optical Biomolecular Chemical Sensing Using Single Wall Carbon Nanotubes
93a
Label-Free Biomolecular Sensing Using Fluorescent Single Wall Carbon Nanotubes
652c
Corona Phase Molecular Recognition for Protein Targets
592a
Z-Bond: New Insight into Ionic Liquid from Structure to Application
143f
Pilot Plant Study on Pyrolysis of Pulverized Coal in Circulating Fluidized Bed with Heat Char Carrier
448h
Numerical Simulations of the Effect of Ionic Surfactant/Polymer on Oil-Water Interface Using Dissipative Particle Dynamics
535g
On the Effect of Surfactants on Drop Coalescence with Liquid/Liquid Interfaces
192e
Preconcentration of Cardiac Troponins in Whole Serum By Isotachophoresis
181d
Safety Stocks Revisited: Terminal Constraints for Closed-Loop Scheduling
View
A Benchtop Capillary Flow Layer-By-Layer (CF-LbL) Platform for Rapid Assembly and Screening of Biodegradable Nanolayered Films
498f
Kinetic Analysis of High Temperature Thermochemical Energy Storage Based on Calcination–Carbonation Chemical Looping Reactions
View
Rheological Characterization of Bovine Intervertebral Discs: A Model for Human Discs
377d
Automated Event Detection and Rate Constants for Complex Systems with Reaxff
96d
B-C and B-Fe Core-Shell Nanoparticles for the Enhancement of Biofuel Combustion
609a
The Solar Fuels Research Program within the Australian Solar Thermal Research Initiative (ASTRI)
260b
Enzyme Precipitate Coating of Glucose Oxidase on Electrospun Polymer Nanofibers with Efficient Antibacterial Activity
260i
Chitosan Nanoparticles with Immobilized Glucose Oxidase As Efficient Antimicrobial Agents
260p
Fabrication of Enzyme-Based Coatings on Intact Multi-Walled Carbon Nanotubes As Highly Effective Electrodes in Biofuel Cells
650c
Lego-like Micropillar/Microwell Chip for High-Throughput Functional Analysis of Genes Encoding Pathogen-Specific Antimicrobial Enzymes
674e
Investigation of the Acid Catalyzed Formaldehyde-Olefin Condensation Reaction
617ek
Understanding Gas Evolution Dynamics on Planar Photoelectrodes
170a
Fast, Efficient and Gentle Transfection of Human Adherent Cells in Suspension
280d
Rapid, Continuous Monitoring of Protein Levels in Food Matrices By Combining Microfluidics and Printed Electronics
739d
A Facile Approach for Simulating Complex Phases in Block Polymers Via Self-Consistent Field Theory
20e
Highly Potent mRNA Delivery In Vivo with Intravenously-Administered Ionizable Lipid Nanoparticles
699i
Aggregation-Induced Emission of Hydrophobically-Modified Metal Clusters in Lipid Nanodiscs
View
Exchange Kinetics of Quinolinyl Ketones with Boronic Acids Via Rhodium Catalyzed C-C Bond Activation
166f
Session Keynote - Hybrid Fuel Cell System for Producing Chemicals and Electricity from Natural Gas
652b
Non-Standard Amino Acid Labeling of the Extracellular Matrix of Probiotics for In Vivo Imaging of the Gut
419f
Structurally pH Responsive Nangel Star Polymers for Use in Drug Delivery Applications
230f
Two-Layer Spin Coating Flow of Newtonian Liquids: A Computational Study
372d
Fingering Instability of a Suspension Film Spreading on a Spinning Disk
448n
Comparison and Validation of Coupled CFD-DEM and CFD-TFM Simulation Predictions for a Laboratory-Scale Wurster-Coating Process
658e
Methodology and Pitfalls When Calibrating a PBM: The Case of Twin-Screw Wet Granulation
708h
Experimental Analysis of Pharmaceutical Twin-Screw Wet Granulation Using Hydrophilic and Hydrophobic Formulations
736d
Modeling an Industrial-Scale Fluidized Bed Wurster Coating Process Using CFD-DEM
661a
A QbD Approach for Identifying Critical Process Paramerters in Drug Substance Manufacturing
17j
Can We Use Short Rotation Hybrid Poplar Coppice for Fuels and Chemicals Production Via Biochemical and Thermochemical Conversion?
534b
A Discussion of Realistic Feedstocks: Can We Use 2-Year-Old Short Rotation Hybrid Poplar Coppice for Fuels and Chemicals Production Via Biochemical and Thermochemical Conversion?
14a
Two Dimensional Halide Perovskites: Structures and Properties
108a
A Green Chemistry Approach for Producing Non-Synthetic Pesticide in Under-Developed Regions
View
A Sustainable Approach to Biodiesel Waste Minimization By Closing the Loop on Production
View
Influence of Physical Microstructure and Surface Properties on the Drying Rate of Water from Simulated Soil Micromodels
View
Modeling, Simulation, and Control of a Supercritical Coal-Fired Power Plant for Smart Grid Applications
293g
Rapid Prototyping: Impeller Design Using 3-D Printing and Data Analysis to Enhance Creativity and Critical Thinking in the Chemical Engineering Curriculum
213a
Effect of Membrane on the Performance of a Hydrogen-Vanadium Regenerative Fuel Cell
597c
Using Semidefinite Programming to Calculate Bounds on Particle Size Distributions
8o
New Modeling and Decision-Making Paradigms in Systems Engineering
240b
Economics and Dynamic Flexibility of Concentrated Solar Power Technologies
456h
A Framework for Multi-Stakeholder Decision-Making and Conflict Resolution
527e
Exploiting Dynamic Flexibility to Enable Participation in Multi-Scale Electricity Markets
691e
Investigation of Continuum Two-Fluid Models in Simulating Fluidised Beds in Openfoam
289d
Oxyhydroxides As a Platform for Confined Oxygen Electrochemistry
465e
Solvation Effects in Surface Electrochemistry for Oxygen Evolution Reaction Catalysis on Transition Metal Oxides
465i
Exploring Possible Active Sites for IrOx/SrIrO3, a Highly Active Oxygen Evolution Catalyst
617ga
A Highly Active and Stable IrOx/SrIrO3 Catalyst for the Oxygen Evolution Reaction
21a
Injectable Hydrogel Beads for Delivery of High Concentration Mab Formulations
38d
The Dynamics of Tight Knots on Tensioned, Single Polymer Chains
161g
Controlled Oil Entrapment through Photo-Patterned Obstacles
283j
Brownian Dynamics Simulations of Knotted Polymers Moving through Pores Under a Constant or Periodic External Field
349i
Nanoemulsion Formation: Controlling and Predicting Droplet Size
766d
'designer' Hydrogel Particles for Controlled Crystallization and Release of Hydrophobic Active Pharmaceutical Ingredients
580b
A Biorefinery Boutique Made in Switzerland
357a
Observation of Extreme Phase Transition Temperatures of Water Confined inside Isolated Carbon Nanotube Nanopores
511e
Layered and Scrolled Nanocomposites with Aligned Semi-Infinite Graphene Inclusions at the Platelet Limit
571b
Analysis of Graphene Membranes and Time-Varying, Stochastic Gas Transport
View
The Development of a Suitable Host Matrix Material for Salt-Hydrate Thermochemical Energy Storage
681e
Machine Learning for Predicting Accurate Quantum Chemical Energies
View
Studying Breast Cancer Metastasis Via the Effect of Breast Cancer Cells on Endothelial Cells
404b
Designer Dual Therapy Nanolayered Implant Coatings Eradicate Biofilms and Accelerate Bone Tissue Repair
470b
Production of Nano-Sized Aluminum through Cryogenic Milling
526a
High Density Reactive Composite Powders
526b
Metal-Rich Aluminum-PTFE Reactive Composite Material
526e
Nanocomposite Thermites with Calcium Iodate As an Oxidizer
612a
Effect of Heating Rate on Combustion of Nano-Composite Thermites Prepared By Arrested Reactive Milling
612e
Combustion Characteristics of Boron and Boron Based Composites in Different Flow Configurations
612f
Effect of Metal-Based Catalysts on Ignition and Combustion of Boron
96h
The Evaluation of Ionomers in Alkaline Membrane Electrode Assemblies for Water Electrolysis
788d
Decoupling of a Low-Dose Dosator Capsule Filling Process in Dynamic and Static Mode Tests to Understand the Extend of the Effect of Powder and Process Parameters on Capsule Quality Attributes
364i
Chemical Engineering in a Maker Studio for All Engineers
228dv
Nemaflex: A Microfluidic Tool for Measuring Muscle Strength in C. Elegans Across Lifespan
546b
Isopentane and Ethylene Alkylation Using Ionic Liquid Catalyst
39h
An Experimental and CFD Based Study of the Pt-Catalyzed NH3-Oxidation in Different Scales
134d
Towards Systems-Scale Dynamic Metabolic Modeling
691d
Staging Effect By a Baffle in a Deep Fluidized Bed
709g
Informing the Structural Model of the Mammalian Voltage-Gated Sodium Ion Channel: Probing Protein Conformational Dynamics Using Small-Molecule Neurotoxins
232m
Shape‐Driven Colloidal Crystal—Crystal Transitions
349a
Dynamics of Colloidal Droplets Under Rotating Magnetic Fields
752g
A Commercial Demonstration of Biorefinery of Lipids--Coproduction of Biodiesel and 1,3-Propanediol
694f
Micromolding of UV Curable Coatings
676a
Green Application of Hydrogenation Catalyst Yn-1 on C4 Cut
158f
Travelling Salesman Problem (TSP) Based Integration of Planning, Scheduling and Control for Continuous Processes
229aq
Incorporating Time Constraints in Model Based Control of siRNA Delivery
527f
A Rolling Horizon Scenario-Based Approach for Smart House Management Under Uncertainty
552e
Model-Based Fault Detection for Nonlinear Process Systems
635f
Multi-Parametric Linear Programming with Global Uncertainty
View
Alkaline Zinc-Manganese Oxide Batteries
599g
Nanocatalysts for Water Splitting
227f
Molecular Insight into Water Effects in a Stable Metal-Organic Framework: An in-situ Experimental and Molecular Modeling Analysis
253aa
Computation of Chemical Potential of Water at Low Temperatures
369e
Applicability of Polarizable Force Fields for M-MOF-74
746b
Continuous Fractional Component Monte Carlo in the Gibbs Ensemble
229bb
A Study of the Effects of Heat Therapy through Thermomechanical Coupling on Action Potential Properties and Spiral Wave Dynamics in a Cardiac Electromechanical Model
247e
Port Hamiltonian Approach to Modeling and Control of Coupled Chemical Reactors
488h
Model Predictive Control of Solar Thermal System with Borehole Seasonal Storage
552d
Pipe-Flows Leak Detection, Size Estimation and Localization
582c
Output Regulation for Boundary Controlled Linear Coupled Hyperbolic Pides: Application to a Parallel-Flow Heat Exchanger System
582h
Model Predictive Control for Linear Distributed Parameter Systems
684g
Tracking Control of Boundary Controlled Continuum Models of Production Systems
533a
Modeling the Sexual Dimorphism in Feedback Regulation of the HPA Axis
View
Natural Fiber / Plastic Composites Using Palm Fronds
10q
Measurement and Control of Slip-Flow Boundary Conditions at Solid-Gas Interfaces
232ac
Penetration of a Non-Swelling Liquid into a Tableted Porous Medium
617hq
Calcium Oxide As in-Situ Catalyst for Steam Gasification of Bio-Char
500f
Development of a Quantitative Framework for Tuning the Performance of Cell-Based Device
213c
Indirect and Direct Observation of Ionomer Colloidal Systems with Applications to Fuel-Cell Catalyst Layers
33f
Recycling & Garbage - a Separations & Materials Challenge
278e
Multi-Zonal Three-Dimensional in Vitro Culture Model of Growth Plate Cartilage Using Alginate Hydrogel Scaffolds
759a
Cell-Free Mixing of Escherichia coli Crude Extracts to Prototype Isoprenoid Biosynthesis
24f
Cold Flow Validation of Catalyst-Biomass Hydrodynamics in Catalytic Fast Pyrolysis
505h
Reversible Assembly of Colloidal Particles Using Low Frequency Pulsed DC Electric Fields for Electrophoretic Displays
607d
Molecular Gel Formation As a First Order Phase Transition
718b
Chiral MOFs: Building Blocks, Features and Design of New Frameworks
165e
Prediction of Liquid-Liquid Partitioning and Solubility of APIs with the SAFT-γ Mie Approach
738g
Computational Screening of Photoactive Cyclic Peptides for Self Assembly and Disassembly
View
An Investigation on the Effect of Neutral Red Concentration on Voltage and Current Outputs for Microbial Fuel Cells
259e
Nitrogen-Functionalized Graphene Oxide By Supercritical Ammonia for Carbon Dioxide Adsorption
269d
The Effect of N-Glycosylation on Biophysical Properties of an Anthrax Toxin Bioscavenger
39c
DFT Calculations and Reaxff Development for MD Simulations of H-BN Growth on Nickel Surfaces
View
Metal Oxide Nanoparticles for Carbon Dioxide Capture
446x
Design of Metal Based Nanofiber Scaffolds for the Removal of Heavy Metal Ions in Harsh Effluents
670f
Regulating the Timing and Sequence of Pro- and Anti-Inflammatory Cytokine Deliveries from Magnetically Responsive Biomaterials for Use in Wound Healing Applications
340a
Janus-like Meso-Porous Hybrid Frameworks for Super-Efficient and Cost-Competitive Water Desalination By Membrane Evaporation
446x
Design of Metal Based Nanofiber Scaffolds for the Removal of Heavy Metal Ions in Harsh Effluents
663d
CO2 and Water Adsorption on Seeded Growth of Mg-MOF-74 on Carbon-Nanotubes
696e
Clustering Effects in Mixed Matrix Membranes Formed By Nano-Sized ZIF-8 and Pebax
72e
A Novel Pathway to 1,5-Pentanediol without the Use of Noble Metals
205d
Influence of Water and Solvents on the Production of Levoglucosenone and 5-(Hydroxymethyl)Furfural from Cellulose
274c
Improving the Hydrothermal Stability of Heterogeneous Catalysts for Conversion of Biorenewables Via Carbon Coating and Overcoating
332c
Coupling Chemical and Biological Catalysis to Produce Biobased Chemicals
332d
Commodity Chemicals from Biomass: Catalytic Conversion of Biomass into α,ω-Diols
393e
Solvent-Enabled Control of Reactivity for Liquid-Phase Biomass Conversion Reactions
576d
Commodity Chemicals from Lignocellulosic Biomass: Conversion of Furfural into 1,5-Pentanediol
628a
Catalytic Process for Levoglucosan Conversion into Distillate Range Molecules
251q
The Impact of Different Waveforms on Particle Trapping Efficiency When Using 3D Carbon-Electrode Dielectrophoresis
255ae
Improving Risk Assessment of Color Additives in Medical Device Polymers
339b
Using Adsorption Calorimetry to Evaluate the Adsorption Properties in Porous Materials
525c
Structural Effects on Adsorption Kinetics of Phosphatidylcholine Vesicles at an Air-Water Interface
333a
Visualization and Analysis of Periodic Process Data
608i
Single Enzyme Biomineralization of Size Controlled, Water Soluble Quantum Dots
394c
Investigating the Effect of Spatially Varying Wall Shear Stress on Lymphatic Endothelial Cell Alignment and Transcriptional Regulation
725g
Cell Motility and Traction Force Generation in Three-Dimensional Fibrin Hydrogels
776e
Single Integrin Force Measurements Reveal the Distribution of Forces Exerted By Living Cells
607h
Information-Directed Assembly of Dynamic Covalent Molecular Ladders
398d
Modeling for Complex Interactive Behaviors Among Enterococcus Faecalis Donor and Recipients in Biofilms
689b
Elucidating Particle Size Effects on the Hydrodeoxygenation (HDO) of Phenolics By Micro-Pulse Experiments and DFT Calculations
275e
Enzymatic Process for Making Plasticizers from High Oleic Soybean Oil
603f
Water-Polymer Mobility and Distribution in Hydrated Aromatic Ionomer Thin Films
652b
Non-Standard Amino Acid Labeling of the Extracellular Matrix of Probiotics for In Vivo Imaging of the Gut
42a
Distributed Lyapunov-Based Model Predictive Control with Safety-Based Constraints
158e
Coordinating Production Scheduling and Process Operation Via Economic Model Predictive Control
247h
Steam Methane Reforming Furnace Control: Design and Implementation on a CFD Model of an Industrial Furnace
266e
Multiscale Computational Fluid Dynamics: Methodology and Application to Film Microstructure Control in PECVD
390g
Elucidating and Handling Valve-Induced Nonlinearity in Industrial Feedback Control Loops
540a
CFD Modeling and Computation for an Industrial Steam Methane Reforming Furnace
597b
Optimal Operation of Batch Enantiomer Crystallization: From Ternary Diagrams to Predictive Control
659e
Error-Triggered on-Line Model Identification for Model-Based Feedback Control
741g
Safety-Based Model Predictive Control with Data-Based Determination of Safety Level Sets
View
Thermal Processing and Mechanical Testing of Ionic Polyimide and Composite Materials
687b
Destruction of Hazardous Heterocyclic Nitrogen Containing Hydrocarbons By Supercritical Water Oxidation
View
Development of a Microinjection Platform for Chlamydomonas Reinhardtii
34d
Human Tear-Film Evaporation Rate from Simultaneous Ocular-Surface Temperature and Tear-Breakup Area
188i
Synthesis of Dimethyl Ether from Natural Gas: CO2 Utilization Process
49g
Mathematical Modeling and Analysis of BMP-Receptor Complex Formation Elucidates Requirements for Heterodimer Dominant Signaling
86h
Interactions Between Peptide-Mimetic Nanoparticles and Synthetic Cells
630c
Assessing the Potential of CO2 Utilization with an Integrated Framework for Producing Power and Chemicals
558c
Two-Phase Kinetics of Enzymatic Depolymerization of Hemicellulose to Soluble Sugars for Liquid Biofuel Production
78a
Single-File Diffusion of Gas Mixtures in Dipeptide Nanochannels: High Field Diffusion NMR Study
454c
Performance Analysis of Texas Eagle Ford Shale Oil Hydro Fracturing Produced Water Treatment Process
100g
Synthesis of Tin(II) Monosulfide Nanoplates: A Potential 2D Material
232u
Molecular Dynamics Study of the Capacitive Performance of Oxidized Graphene
436i
Polymorphic Transformations at Ambient Conditions Elucidated with Molecular Dynamics
68h
Macroporous Polymer Scaffolds for the Transplantation of Embryonic Stem Cell Derived Beta-Cell Progenitors to a Clinically Translatable Site for the Treatment of Type I Diabetes
240b
Economics and Dynamic Flexibility of Concentrated Solar Power Technologies
484e
Preparation of Thermally Responsive Magnetic Nanocomposites for the Removal of Environmental Pollutants
639d
NOVEL Magnetic Nanocomposite Materials for RAPID Removal of Polychlorinated Biphenyls from Contaminated Water Sources
View
Synthesis and Characterization of Thermoresponsive Hydrogels Based on N-Isopropylacrylamide (NIPAAm) and Novel Crosslinkers
View
The Effect of Poly (beta amino ester) and Dopamine Coatings on the Surface Activity of Iron Oxide Nanoparticles
View
Exploring Red/Ox Activity of Oxide Nanoparticles for Biomedical and Catalytic Applications
754f
Confined Water Determines Transport Properties of Guest Molecules in Narrow Pores

Google
Yelp
Facebook
Twitter
ChEnected