Author Index: E
Author Index: E
582cs
Sensitive, Rapid, Amplification-Free Immunoassay Using Labeled Bacteriophage, Magnetic Capture Beads and Image Processing Techniques
217co
Oxidative Surface Phenomena of Eutectic Gallium Indium
4ad
High-Performance Phosphorescent Organic Light-Emitting Diodes (PhOLEDs) Achieved By Orthogonal Solution-Processing Strategy
159b
Comparison of Liquid Bridge Volume Models in DEM Simulations
26e
Robust Hydrogenation Catalyst Selection for Manufacturing of a Pharmaceutical Intermediate: A Kinetic Based Approach
678c
Synthesis-Structure-Function Relations for Supported Oxides, Including Quantification of Accessible Metal Oxide Active Sites On Ti-SiO2 Systems
124f
Measuring the Full Three-Dimensional, Nonequilibrium Microstructure of Complex Fluids Under Steady and Time-Dependent Shear, Including Laos, Using Spatial and Time-Resolved Small-Angle Neutron Scattering
33b
Rapid Cycling of Pure Gases in a Single Bed PSA Apparatus
327a
Hybrid PSA-Distillation Process for Propane/Propylene Separation
535c
CO2 Capture From Flue Gas By PSA Utilizing a Structured Adsorbent
662e
Diffusion of N2 and CO2 in 13X Zeolite From Volumetric Frequency Response Measurements Up to 10 Hz
731d
On the Variability and Reproducibility of Equilibrium Adsorption Isotherm Measurements From Different Laboratories
44e
Enhanced Therapeutic Index in Acute Myeloid Leukemia Models By Gold Nanoparticles Directly Passivated With Chemotherapeutics
7d
Integrated Micro Nanotechnology for Sensitive Detection of Cancer Cells in Circulation
64e
Flow Regime Identification in Trickle Bed Reactor By Gamma Densitometry
620b
Lung-Liver Interactions: A Multi-Scale In Vitro Systems Analysis
528d
Performance and Applications of a Yeast Surface Display-Based Biocatalyst
336b
Berkeley in the Early 60’s
399e
Ionic Liquid Thin Film Technology – Advanced Materials for Gas Purification
162h
Generalized Langevin Dynamics for Functionalized Nanocarrier Adhesion to Cell Surfaces in the Presence of Hydrodynamic Interactions
View
Surface Characterization of p-Type Si Etched in Chlorine-Containing Plasma Under Photo-Assisted Etching Conditions
123a
Model Development for the Gas-to-Liquid Process Based On Molecular Simulation and Experimental Measurements of Physical Properties
179d
Hydrogen Storage in Hydrates: Evaluation of Different Force-Fields Used in Monte Carlo Simulations
222ah
Comprehensive Thermophysical Model Development for CO2 Pipeline Transport
311b
Systematic Molecular Simulation Investigation of the Influence of the Chemical Structure of Anion and Cation to the Properties of Imidazolium-Based Ionic Liquids and to the Thermodynamic Properties of Light Gases Dissolved Therein
456d
Molecular Modeling of Retrograde Vaporization in Enhanced Oil and Gas Recovery
576b
European Federation of Chemical Engineering – Working Party On Thermodynamics and Transport Properties
667a
Effect of Langmuir Constants On Hydrate Equilibrium Calculations
201b
Multivariate Characterization, Modeling, and Design of Ionic Liquids
203ag
Describing Crystal Morphology By 2D/3D Molecular Descriptors
203ah
Utilization of Molecular Signature Descriptors for the Generation of Candidate Reactant Structures
214x
Ionic Liquid Design By Multivariate Characterization and Modeling
269e
Developing a QSAR Relating Solvent Structure to Crystal Morphology Using 2D & 3D Molecular Descriptors
277a
Biomass Gasification Using Carbon Dioxide: Chemistry and Process Modeling
419e
Utilization of Multi-Dimensional Characterization in Virtual High-Throughput Screening
419f
Generation of Candidate Reactant Structures Using Signature Descriptors
586z
Virtual High-Throughput Screening By Multi-Dimensional Characterization Techniques
587ar
Chemistry and Process Modeling of Biomass Gasification Using Carbon Dioxide
692g
Synthesis and Characterization of Drug-Polysaccharide Nanoparticles for Oral Drug Delivery
796c
Cooperative Co-Culture of Escherichia Coli and Saccharomyces Cerevisiae for Overproduction of Paclitaxel Precursors
37c
Maximization of Energy Efficiency of a Combined Heat and Power Plant
251b
In Honor of Rex's 70th Birthday - TE
287d
Smart Manufacturing Leadership Coalition Launches $10 Million DOE Project to Develop Open Smart Manufacturing Platform for Collaborative Networked Industrial Information Applications
325d
Visual Data Mining and Fault Detection in Radial Coordinates
524c
A Plantwide Dynamic Model of Post-Combustion Amine Scrubbing With Aqueous Piperazine
555b
Community-Scale Residential Air Conditioning Control for Effective Grid Management
547b
Large-Scale Reconstruction and Analysis of High Quality Core Metabolic Models for Over 8000 Microbial Genomes
381c
Device Performance of Poly(3-hexylthiophene)/Fullerene Solar Cells Is Limited By Electron Transport
577d
Molecular Dynamics Simulations of Self-Assembly of Nonviral Gene Delivery Complexes By Pegylated Peptides and siRNA Molecules
366a
Determinants of Calcium Reabsorption in the Rat Kidney
486e
First-Principles Modeling of Proton Conductivity in Perfluorosulfonate Fuel Cell Membranes
28b
A Self-Consistent Field Study of Diblock Copolymer/Charged Particle System Morphologies for Nanofiltration Membranes
98ay
Atomistic Simulation of Dynamics of Individual Molecules in Entangled Polymers Undergoing Homogenous Shear Flow
222bd
Composition Dependency of the Flory-Huggins χ Parameter in Isotopic Polymer Blends
653g
JP-10 Combustion Studies Using Automatic Reaction Mechanism Generation
728f
Thermodynamics and Kinetics of Electric Field Mediated Colloidal Crystal Assembly
View
Economic Optimization of Distributed Generation: Microgrid Integration of Wind, Solar, and Energy Storage Systems
710h
A New CAPE-OPEN Unit Operation Module for Simulation of Brazed Plate-Fin Heat Exchangers
812d
Integration of Anaerobic Digestion of Cellulose Into Lipid Accumulation By a Mixed Microbial Consortium
638c
Injection Moulding As a One-Stop-Production to Produce Pharmaceutical Dosage Forms
300c
Restructuring of Aggregates and Their Primary Particle Size Distribution During Sintering
582i
Polymer-Conjugated Enzyme Biohybrid Carriers for Detoxification Processes-Internal Diffusion and Kinetics
461c
The Availability Of Indium and Tellurium For Thin-Film Photovoltaic Materials
View
Catalytic Enhancement of Hydrogen Storage Characteristics in BH3NH3-nMgH2 Complex Hydrides
683b
Phosphoplipid Alterations and ER Calcium Efflux Promote Metabolic Dysfunction in the Context of Hepatic Lipotoxicity
216ap
Designing Ionic Liquids for the Removal of Phenolic Compounds From Bio-Oils: A Microscopic Approach
44e
Enhanced Therapeutic Index in Acute Myeloid Leukemia Models By Gold Nanoparticles Directly Passivated With Chemotherapeutics
View
Process Design and Integration of Shale Gas to Methanol
98at
Understanding the Dynamics of An Organic Droplet Released in Quiescent Water Column
214e
A Molecular Simulation Study of Dispersants and Oil Hydrocarbons At Atmospheric Air/Salt Water Interfaces
730g
Green Leaf Volatiles and Reactive Oxygen Species On Atmospheric Air/Water Interfaces
730h
Atmospheric Oxidation of Benzene: Effect of Temperature and Ionic Strength in Both the Bulk Aqueous Phase and At the Air-Water Interface
689f
Characterization of Bacterial Spore Surfaces Using Nanomechanical Mapping
347j
DNA-Based Microrna Sensors
134b
Electrochemical Properties and Characterization of Li1.2Mn0.54Co0.13Ni0.13O2 Composite Cathode Powders Prepared by Ultrasonic Spray Pyrolysis
84c
Engineering a Three-Dimensional Model of Vascularized Human Tumor Tissue
586aj
Development of a Robust Film Coating Process: The Impact of Wetting Dynamics On the Film Stress - Film Adhesion Balance
481f
Semi-Preparative Isotachoporesis for Fractionation of RNA From Blood
485d
Carbon Nanotubes Induced Cellular Biomeahanic Changes Is Depended On Treatment Time
217cn
Stable Suspension of Mixed Iron Oxide/Manganese Oxide Nanoparticles in Aqueous Surfactant Solutions and Their Use for Mixer Studies in Liquids Feeds
69b
An Improved in Vitro Model for the Study of Cancer Cell Adhesion to Endothelial Cells Using Micropatterned Surfaces
582f
Dynamic Adhesion Assays for Understanding the Significance of CD151 in the Metastatic Cascade
772e
Assessment of Microgroove-Aligned Endothelial Cells for in Vitro Simulations of Cancer Cell Adhesion
98aa
A New Boundary Treatment for Complex Geometries in Smoothed Particle Hydrodynamics
578b
Simulation of Mixing in Hot Melt Extruders Using Smoothed Particle Hydrodynamics
586l
Implementation of a Novel Inline Particle Size Measurement Tool to Monitor Pellets Produced By Hot Melt Extrusion and Die Face Pelletizing
376c
Surface Modification of Carbon Hard Sphere Via Surface Initiated Atom Transfer Radical Polymerization
391g
Conceptual Design of Distillation Colums for Ethanol Dehydration By Using Ionic Liquids
360a
Powercells Fuel Processing Development and Its Application in APU System With a PEM Fuel Cell
42d
Spontaneous Mineralization of Hydrophobic Hydrogels for Craniofacial Bone Tissue Regeneration
436a
Hydrogen Production From Water
463b
Industrial Platform Design for Large Scale Production of Pleuran: An Immunomodulator/Anticancer Polysaccharide From Pleurotus Ostreatus
585d
Optimization of Xylanase Enzyme Production Using Recombinant Escherichia Coli By Response Surface Methodology (RSM)
585e
Improving Thermostable Phytase Production in Recombinant Escherichia Coli During Fed-Batch Cultivation in Semi-Industrial Scale Stirred Tank Bioreactor
585f
Statistical Medium Optimization for High Biomass Production of Trichoderma Harzianum: A Potential Biocontrol Agent for Ganodermal Oil Palm Disease
585g
Bioprocess Development for High Cell Density Cultivation of Rhizobium Trifolii in Semi-Industrial Scale Stirred Tank Bioreactor
465a
Continuous Operations in Pharmaceutical Solid Dosage Form Manufacturing: Dry Granulation Case Study
32g
Operation of Residential Hybrid Renewable Energy Systems: Integrating Forecasting, Optimization and Demand Response
105d
Resource-Aware Control of Spatially Distributed Processes: Integrating Control, Computation and Communication
137c
Quasi-Decentralized Output Feedback Model Predictive Control of Networked Process Systems Using Forecast-Triggered Communication
204e
Sensor Fault Accommodation Strategies in Multi-Rate Sampled-Data Control of Particulate Processes
325f
Fault Detection and Isolation of Hybrid Process Systems Using a Combined Data-Driven and Observer-Design Methodology
613c
Networked Predictive Control of Transport-Reaction Processes Using Event-Triggered Communication
86b
Macroscopic Water Integration Direct Recycle Applications Within Industrial City Plots
200k
An MILP Model for Watershed Pollution Trading Which Incorporates Material Flow Analysis
203aa
Managing Flares During Abnormal Process Operations Via Design of Co-Gen System of Discontinuous Sources
203e
A Generic Approach of Using Dynamic Simulation for Emission Reduction Under Abnormal Operations: Scenario Study of An Ethylene Plant Startup With Sulfur Recovery Unit
203g
Optimal Design of Inter-Plant Waste Energy Integration
203h
Optimal Synthesis Of WATER Networks Based On Properties Considering Growing Demand Projections
203i
Sustainable Integration of Heat Exchanger Networks and Utility Systems
203k
Optimal Facility Layout Considering Simultaneously Economic and Safety Aspects
204j
Optimization of the Supply Chain Associated to the Production of Bioethanol From Residues of Agave in Mexico
204k
Optimal Planning for the Sustainable Management Municipal Solid Waste
278d
Evaluation of Predictive Models for High-Pressure Natural Gas Viscosity
644b
Sustainable Design Of Macroscopic WATER Networks
644c
Optimization of the Water-Energy Nexus in Gas-to-Liquid Processes
756e
Water-Energy Nexus in Gas-to-Liquid Processes: Assessment and Integration for Different Gas-Reforming Alternatives
217ay
Effect of Salts On Polyacrylamide Hydrolysis and Cross-Linking With Polyethylenimine At Elevated Temperatures
215q
Investigating the Performance of a Continuous Electrocoagulation Unit for the Combined Removal of Nitrate and Phosphate Ions From Wastewater
722a
Water-Gas Shift Catalysis Over Supported Platinum Nanoparticles
349g
Award Submission: Effects of Acid Treatment On Structure, Properties and Biocompatibility of Carbon Nanotubes
397y
Electronic Platform to Quantify Cellular Mechanisms Associated With Carbon Nanotubes
422b
Toxicity Effects Associated With Exposure of Lung Epithelial Cells to Polymer Nanocomposites and Nano-Platelets of Silicates
540b
Differential Analysis Of Single Wall Carbon Nanotubes Cellular Uptake Mechanism
691c
Effects of Acid Treatment On Structure, Properties and Biocompatibility of Carbon Nanotubes
804d
Electronic Platform To Quantify The Anticancer Mechanisms Of Cardiac Glycoside and Synthetic Analog
View
Examining the Effects of Thermally-Degraded Nanoclay Enforced Polylactic Acid Composite on Cellular Systems
319b
ZnO Nanorods Hermetically Encapsulated By a Nanothin Amorphous SiO2 Coating: Toxicological Profile and Optical Properties
122c
Greenhouse-Gas (GHG) Emissions From Denitrifying Fluidized Bed Bioreactors (FBBR)
528g
Optimization and Characterization of Candida Cylindracea Lipase Produced From Palm Kernel Cake By Solid-State Bioconversion
500a
Alkyl Ethoxylate Surfactants With High Hydrophilic-Lipophilic Balance for Smart CO2-Water Foam in Enhanced Oil Recovery
449c
Low Temperature Non-Catalytic Transfer Hydrogenation of Coal in Supercritical CO2
538b
Biomass and Natural Gas to Liquid Transportation Fuels and Olefins (BGTL+C2_C4)
554a
Biomass and Natural Gas to Liquid Transportation Fuels and C6-C8 Chemicals (BGTL+C6_C8)
573b
Nationwide, Regional, and Statewide Natural Gas to Liquid Fuels (GTL) Supply Chain
616b
Strategic Long-Term Energy Planning for Natural Gas to Liquid Fuels (GTL) Supply Chain Systems
693f
CO Hydrodeoxygenation On Functionalized Metal-Free CNT Surfaces
777b
Surface Modification of Forward Osmosis Membranes for Improved Fouling Resistance
145d
Supercritical Fluid Delignification and Enzymatic Saccharification of Agave Bagasse
222i
Density and Viscosity Study of the Binary System 2,5-Dimethylfuran and Decane
222t
Experimental Vapor-Liquid Equilibria for Carbon Dioxide + 1-Propanol + Heptane
222w
Densities for Binary Systems Alkane + Thiophene At Temperatures From 313.15 to 363.15 K in the Range of 1-20 Mpa
222y
Compressed Liquid Densities for the Ethanol + Heptane + Decane System At High Pressures and Temperatures
806b
Quantifying the Contribution of Structural Proteins to Cell Mechanics With a Live Cell Monolayer Rheometer
618e
Improving the C2 Selectivity for the Oxidative Coupling of Methane Reaction By Doping Rare-Earth Oxide Based Catalysts With Lithium
217as
A Microfluidic Method to Evaluate Degradable Hydrogels for Drug Delivery
184g
Strong Surfactant-Dependent Lift Forces On Drops and Bubbles in Microchannels
148a
Adapting SAFT-γ Perturbation Theory to Site-Based Molecular Dynamics Simulation: An Application to Homogeneous and Inhomogeneous Systems
576a
Introductory Comments for Thermodynamics Needs of Chemical Industry
576g
Discussion On Thermodynamics Needs of Chemical Industry
581f
Project Management and Teamwork: A Vertically Integrated Team Design Project for All Students in Chemical Engineering
676f
Facilitating Learning in Thermodynamics and Computations Using Technology
6f
Discovery of Antibody Biomarkers Present in Pre-Eclampsia
137a
Optimal Time-Varying Operation of Nonlinear Process Systems With a Two-Layer Economic Model Predictive Control Scheme
139a
Economic Model Predictive Control With Switching Objective Function and Constraints: Merging Actuator Preventive Maintenance and Economically-Optimal Operation
139d
Robust Moving Horizon Estimation Based Output-Feedback Economic Model Predictive Control
231c
Economic Model Predictive Control With Time-Varying Objective Function: Handling Dynamic Energy Pricing and Demand Changes in Process Systems
325b
On Monitoring of Economic Model Predictive Control Systems
443b
Model Predictive Control of a Large-Scale Process Network Used in the Production of Vinyl Acetate
613b
Economic Model Predictive Control of Transport-Reaction Processes
468b
Development of Biochar As a Promising Carbon-Based Candidate in Electric Double Layer Applications
4bi
Block Copolymer Patterns Replicated By Photochemical Transfer Printing
40b
Manipulating Polymers With Light Activated Chemistries for Patterning Films and Manufacturing Fibers
217aa
Enhancing the Rheological Properties of Main-Chain Liquid Crystalline Polymers for Film Coextrusion
217es
Replicating Block Copolymer Patterns By Photochemical Transfer Printing
266f
Photochemical Transfer Printing of Block Copolymer Patterns
382d
Silicon-Containing Block Copolymers for Sub-20 Nm Pitch Patterning
819b
Centrifugal Forcespinning for Manufacturing High Performance Fibers
529i
Biomasspyrolysisrefinery: Product Stability of Intermediates and Products
668b
The Role Of Smartphones and Tablets In Numerical Problem Solving
View
Visualization of Composition-Property Relationships of Synthetic Jet Fuel with Aromatic Additives
812e
Sustainable Algae Oil Production: Integrating Waste Water
278d
Evaluation of Predictive Models for High-Pressure Natural Gas Viscosity
385b
Use of Single-Pass Tangential Flow Filtration for Decoupling Upstream and Downstream Processing
548c
Process Development Comparison of Single Use Clarification Technologies for Mammalian Cell Cultures Utilizing a Conventional Two-Stage Depth Filtration, a New Optimized Depth Filter and a Novel Single-Use Fluidized Bed Centrifuge With Depth Filtration
428g
Development of Model Based Visualization Tool for Demonstration of Basic Separation Processes in Unit Operation Laboratory Courses
587w
Modeling of a Fiber Packed-Reactor Under Laminar Regime for the Production of Chemicals, Including Biodiesel and Nanoparticles
222d
Uncertainty in Sour Gas Viscosities Estimation
709g
Electrochemical Strategies for Reduction of Greenhouse Gas Emissions
4ac
Particulate Process and Product Design
52c
Modeling of Heat Transfer in Rotary Calciners
273h
Design and Operation of Continuous Rotary Calciners
379b
Particle Sedimentation in Yield Stress Fluids With Different Microstructures
398u
Scale-Up of Continuous Rotary Calciners: Heat Transfer and Powder Flow
583ga
Heat Transfer Scale-Up Laws Within a Rotary Calciner
164a
Dual Template Synthesis of Meso-/Microporous MFI Zeolite Nanosheet Assemblies With Tailored Activity in Catalytic Reactions
237c
Woody Biomass to Liquid Hydrocarbon Fuel
249g
Smart Imaging Analysis for the On Line Observation of Bioprocesses At the Example of the Microalgae Crypteconinium Cohnii
241f
Design and Operation of Crystallization-Based Enantioselective Processes: Enantioselective Crystallization of Chiral Compounds On An Enzymatic Reactive Environment
104d
Development and Properties of Novel Photo-Cleavable Surfactants
148h
Hard-Disk Equation of State: First-Order Liquid-Hexatic Transition in Two Dimensions With Three Simulation Methods
464a
The Role of Anisotropy for the Assembly of Hard Colloidal Nanoparticles
464c
Entropically Patchy Particles
464d
Competition of Shape and Interaction Patchiness for Self-Assembling Nanoplates
591a
Massively Parallel Monte Carlo for Many-Particle Simulations On GPUs
605i
Role of Symmetry in the Self Assembly of Space-Filling Honeycombs
667c
Equations of State for Hard Polyhedra
489a
Synthesis and Characterization of Novel, In Situ Cross-Linkable, Biodegradable, Thermoresponsive Hydrogels for Bone Tissue Engineering
59a
Sustainability Metrics For Biofuel Production Process Design
771e
New Insight Into Reaction Mechanisms of Ethanol Steam Reforming On Co/ZrO2
587al
Fouling Rates of Model Carbohydrate Solutions and Their Interaction Effects
585c
Isolation, Identification and Quantification of Two Major Antioxidants From Sarang Semut (Myrmecodia pendan)
465c
Continuous Manufacturing Traceability for Pharmaceutical Products
571b
Rational Design of Antimicrobial Polycarbonates
148c
Prediction of Multiphase Equilibrium of Water-Alcohol-Hydrocarbons Using Theory-Based Equation of State
222aw
Vapor Pressures of Supercooled Liquid Water in No-Man's Land
503d
API Particle Engineering for Drug Substance: Crystallization & Wet Milling to Control API Powder Properties
278e
Experimental Measurements and Modeling of Viscosity for Liquid Hydrocarbons At Pressures Up to 243 Mpa and Temperatures Up to 534 K
353c
Status of Eos Model Development for Extreme Temperatures and Pressures
353e
Study of CO2-Soluble and Brine-Soluble Surfactants for CO2 Mobility Control
456a
The CO2-Solubility and Viscosity Enhancing Potential of CO2-Philes Functionalized With Aromatic Groups
484e
Hydrophobic Polymeric Solvents for the Selective Absorption of CO2 From Warm Gas Streams That Also Contain H2 and H2O
119e
Effect of Material Type and Particle Density On the Margination of Vascular-Targeted Carriers
512b
Influence of Size and Shape of Vascular-Targeting Carriers On Neutrophil Adhesion to An Inflamed Endothelial Monolayer in Blood Flow
584ak
Evaluating Nanodisks and Nanorods As Carriers for Targeting Diseased Endothelium in Physiological Blood Flows
642d
Innovative Sustainable Materials & Processes
8b
Optimization of Mucus Penetrating Particles and Vehicle Composition for Improved Mucosal Surface Drug Delivery
581e
Encouraging Information Transfer With a Pre-Capstone Design Project
217ai
Validation of Micro-Reaction Technology for Polymerization Processes
View
Using Landfill Waste for Direct Conversion to Butanol
165e
Sulfur Poisoning of the NH3-SCR Reaction Over Cu-SAPO-34: SO2 Vs. SO3
304g
Sulfur Poisoning of Diesel Exhaust Aftertreatment Catalysts
361f
NH3-SCR Over Cu/SAPO-34 - Zeolite Acidity and Active Site Changes As a Function of Cu Loading
405c
Experimental and Kinetic Study of the SO2 Oxidation Reaction Over a Pt/Al2O3 Catalyst
563d
Measuring and Using Reaction Gradients In Diesel Emissions Reduction Catalysts
217bq
The Electrical Stimulation of Osteoblast Cell Lines Using Self-Doped Sulfonated Polyaniline-Based Interdigitated Electrodes
699f
Dynamic Modeling of An Industrial Fluid Catalytic Cracking Unit By the Method of Discrete Lumping
400f
Adsorption of Methane and Nitrogen On Activated Carbons: Numerical Derivation of Nitrogen Adsorption Affinity Coefficient
487e
Final Step for CO Syngas Clean-Up: Comparison Between CO-PROX and CO-SMET Processes
395aa
Ion-Exchanged Sod-ZMOFs for CO2 Capture Via Adsorption
33b
Rapid Cycling of Pure Gases in a Single Bed PSA Apparatus
731d
On the Variability and Reproducibility of Equilibrium Adsorption Isotherm Measurements From Different Laboratories
220c
Novel Approach in Heat Exchanger Fouling Monitoring
103b
Transient Interfacial Zinc Oxide Formation in Cycling Alkaline Batteries Detected Using Synchrotron X-Rays
547c
Constrictor: Flux Balance Analysis Constraint Modification Provides Insight for Design of Biochemical Networks
View
Sustainable Management of Algae in Eutrophic Ecosystems
617a
An Investigation of a Stratified Catalyst Bed for Small-Scale Hydrogen Production From Methanol Autothermal Reforming
583fv
Phase Transfer Catalysis in Micro Channels, Milli Channels and Fine Droplets Column: Effective Interfacial Area
63h
Liquid-Vapor Phase Behavior of Asphaltene-Like Molecules
83b
Using Monte Carlo Simulations to Compute Liquid-Vapor Saturation Properties of Realistic Models of Room Temperature Ionic Liquids
214l
Using Monte Carlo Simulations to Study Bulk and Interfacial Properties of Ionic Liquids
452d
Understanding the Temperature Dependence of Solid-Liquid Interfacial Properties
505a
Using Molecular Simulation to Understand Interfacial Phenomena
629e
Virial Coefficient Theory for Adsorption of Gas Mixtures
643g
Novel Cobalt Catalyst Supported On Titania-Decorated Silicon Carbide for Fischer-Tropsch Synthesis
70b
Concentration and Mixing Effects On the Production of Amine Hydrochloride Salts in a Confined Impinging Jet Reactor
502a
Surface-Mediated Mechanisms for Defect Engineering in Metal Oxides
View
Plasmon Resonances in Bimetallic Nanostructures: The Role of Temperature and Core/Shell Architecture
423b
Designing Greener Plasticizers: Influence of Geometry of Central Group and Side Chains
655f
Enabling Hydroformylation in Micro-Emulsion Systems: Long-Term Performance of a Continuously Operated Mini-Plant
710f
Mosaic: An Online Platform for Combined Process Model and Measurement Data Management
740b
MINLP Optimization of a Membrane-Absorption-Hybrid System for the Removal of CO2 From OCM Product Gas
515b
Superhydrophobic Surfaces Through Micromolding Surface-Initiated Polymerization
202l
Gtm Semi-Supervised Approach for State Recognition in Dynamic Data
294f
Use of Fluorescent Protein Fusions to Optimize Membrane Protein Expression in Anaerobic Photoheterotrophic Rhodobacter
537f
Fractionation of An Oligomeric Pyrene Pitch Via Supercritical Extraction
582b
Computational Design of New Peptide Inhibitors for Amyloid Beta (Aβ) Aggregation in Alzheimer's Disease: Application of a Novel Methodology
243h
High-Resolution Simulations of Turbulently Flowing Liquid-Liquid Dispersion
305a
A Model of Wax Deposition Accounting for Deposit Aging
371d
Determination of Drop Size Distribution in Turbulently Agitated Liquid-Liquid Dispersion Using Numerical Simulations
458e
High-Resolution Simulations of One- and Two-Phase Homogeneous Isotropic Turbulent Flows
View
Catalytic Enhancement of Hydrogen Storage Characteristics in BH3NH3-nMgH2 Complex Hydrides
538d
Simulation-Based Optimization Framework With Heat Integration
614c
Electrode Potential Dependent Activation Barriers Approximated With Density Functional Theory
12c
The Riboswitch Calculator: De Novo Design of Synthetic Cis-Acting Riboswitches From Ligand-Binding Aptamers
397bo
Evaluation Of A New Method For Encapsulating Two Drugs In PLGA Nanoparticles: Physical-Chemical Charaterization
View
Amphiphilic Synthetic Copolymer with Membrane-Disrupting Antibacterial Properties
696d
A Novel MILP Model for Maintenance Scheduling of Gas Turbines
436d
Efficient Photoelectrochemical Water Splitting With Si-Based Metal-Insulator-Semiconductor Photoelectrodes
757d
Covariance Estimation of a Laboratory Emulsion Polymerization System: Comparison Between ALS and Direct Optimization Methods
View
Preparing for Harvesting Radioisotopes from FRIB
413h
Molecular Recognition Using Nanotube-Adsorbed Polymer Complexes
222j
Mathematical Model and Validation of Parallel Plate Water Electrolyzers
217bb
Experimental and Theoretical Study of High-Impact Polystyrene (HIPS) Devolatilization
217h
Mathematical Model for the Bulk Polymerization of Styrene in the Presence of Polybutadiene Using a Trifunctional Initiator
748d
Mathematical Modeling and Optimization Of The Bulk Continuous Process For The Production Of High Impact Polystyrene
555d
Pseudo-Distributed Feed Configurations for Catalytic Plate Microchannel Reactors
279b
Experimental Measurement and Modeling of Type 3 Ternary System Containing n-Decane + Water + Triacetin
204t
Integrated Microalgae Biorefinery for the Production of Biodiesel and Value Added Products
132c
The Effect of Particle Shape On the Scale Up of Just Suspended Impeller Speed
566f
Gas Expanded Liquids for Tailoring Chemical and Physical Properties
361d
Development of Low-Temperature SCR Catalysts for the Cold-Start Applications of NOx Reduction
115d
Pathway to Process Technology Commercialization
215n
Life Cycle Assessment of the Gasplasma Process: An Innovative Waste Management Option
217fm
Isothermal Water Splitting Using The Two-Step Redox “Hercynite Cycle”
297b
Isothermal Water Splitting: A Novel Approach to Efficient H2 Generation Through Solar Thermal Energy
583f
Experimental and Model Comparison of Chemical Looping H2 Production Using Ferrites in a Packed Bed Reactor
600e
Experimental and Model Comparison of Mixed Metal Ferrites for H2 Production Using Chemical Looping
324b
Fragility Plays a Key Role in Determining the Magnitude of the Tg-Confinement Effect in Polymer Films
View
Understanding the Flow Dynamics of Nanoparticles for Improved Cancer Therapy
581f
Project Management and Teamwork: A Vertically Integrated Team Design Project for All Students in Chemical Engineering
169b
The Impact of Various Feedstocks On Biomass Gasification Evaluated By Pyrolysis Molecular Beam Mass Spectrometry
675e
First Principles Thermodynamics of Amorphous Silica
353b
Capillary Pressure Determination Using the Micropore Membrane Technique: An Experimental Study

Google
Yelp
Facebook
Twitter
ChEnected